Docker Image to get Arduino-CLI working on the Jetson Nano #3

[arpit6232]

DOD: Get a working Image of the Arduino-CLI on the jetson Nano under aarch64 arch either using docker or git (whichever is easier).

Blocker:
Raised an issue with Arduino developers for lack of support for some necessary binaries. Which can be seen in the image below. The binaries are not explained here as there can many or one. As progress is discussed with Arduino developers.

1. arduino:[email protected] not available for arm64 arduino/arduino-cli#1254 (comment)
2. arduino:[email protected] not available for arm64  arduino/ArduinoCore-mbed#176

[arpit6232]

Updates: Folks at Arduino have created a tooling label to be added into the Arduino-cli

[arpit6232]

Worked cross-functionally to test the working for ARM 64 with the Arduino Team.

https://github.com/arduino/ArduinoCore-mbed/releases/tag/2.0.0
arduino/ArduinoCore-mbed#176

[arpit6232]

Completed test and functioning to send firmware updates from Jetson to Arduino over CLI.
DoD1: Successfully Dockerize Arduino-CLI for X86.
Work over Sprint2: Docker Hub : https://hub.docker.com/repository/docker/arpit6232/arduino_cli

DoD2 : Send firmware updates to Arduino From Jetson over AARCH64.
Work over Sprint2:

1. arduino:[email protected] not available for arm64  arduino/ArduinoCore-mbed#176
2. https://github.com/arduino/ArduinoCore-mbed/releases/tag/2.0.0
3. Test with/for the Arduino team for functioning.