scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.

The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module
for 41000 Series Converged Network Adapters by QLogic.

This patch consists of following changes:

  - MAINTAINERS Makefile and Kconfig changes for qedi,
  - PCI driver registration,
  - iSCSI host level initialization,
  - Debugfs and log level infrastructure.

The following indiviual changes are merged into this commit:

  qedi: Add LL2 iSCSI interface for offload iSCSI.
  qedi: Add support for iSCSI session management.
  qedi: Add support for data path.

Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Adheer Chandravanshi <[email protected]>
Signed-off-by: Chad Dupuis <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

Author: Manish Rangankar

MAINTAINERS

@@ -10079,6 +10079,12 @@ F:	drivers/net/ethernet/qlogic/qed/
 F:	include/linux/qed/
 F:	drivers/net/ethernet/qlogic/qede/
 
+QLOGIC QL41xxx ISCSI DRIVER
+M:	[email protected]
+L:	[email protected]
+S:	Supported
+F:	drivers/scsi/qedi/
+
 QNX4 FILESYSTEM
 M:	Anders Larsen <[email protected]>
 W:	http://www.alarsen.net/linux/qnx4fs/

drivers/scsi/Kconfig

@@ -1233,6 +1233,7 @@ config SCSI_QLOGICPTI
 
 source "drivers/scsi/qla2xxx/Kconfig"
 source "drivers/scsi/qla4xxx/Kconfig"
+source "drivers/scsi/qedi/Kconfig"
 
 config SCSI_LPFC
 	tristate "Emulex LightPulse Fibre Channel Support"

drivers/scsi/Makefile

@@ -131,6 +131,7 @@ obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_CXGB4_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
+obj-$(CONFIG_QEDI)          += libiscsi.o qedi/
 obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_ESAS2R)	+= esas2r/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o

drivers/scsi/qedi/Kconfig

@@ -0,0 +1,10 @@
+config QEDI
+	tristate "QLogic QEDI 25/40/100Gb iSCSI Initiator Driver Support"
+	depends on PCI && SCSI
+	depends on QED
+	select SCSI_ISCSI_ATTRS
+	select QED_LL2
+	select QED_ISCSI
+	---help---
+	This driver supports iSCSI offload for the QLogic FastLinQ
+	41000 Series Converged Network Adapters.

drivers/scsi/qedi/Makefile

@@ -0,0 +1,5 @@
+obj-$(CONFIG_QEDI) := qedi.o
+qedi-y := qedi_main.o qedi_iscsi.o qedi_fw.o qedi_sysfs.o \
+	    qedi_dbg.o
+
+qedi-$(CONFIG_DEBUG_FS) += qedi_debugfs.o