quick: Updating version number and version history docs

Signed-off-by: Tyler Erickson <[email protected]>

Author: vonericsen

docs/openSeaChest/openSeaChest_Basics_Version_History.txt

@@ -297,3 +297,13 @@ v3.7.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Fixed exit code when -d all or --modelMatch are used but all devices are skipped so that 
                      the exit code is not set to 0 (success) when all the devices were skipped.
                      Fixed parsing some CLI options to allow empty units like previous versions.
+v3.7.2  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Fixed incorrect protocol specified in ATA download microcode passthrough command. This causes firmware updates
+                     to hang when the device does not support the download DMA command.
+                     Fixed NVMe firmware update in Windows 11 23H2 and 24H2.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Configure_Version_History.txt

@@ -222,4 +222,11 @@ v2.9.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Fixed a bug reading the SCT error recovery timers due to incorrect endianness.
                      Added additional check to --setMaxLBA to confirm that the maxLBA changed as expected since SAS drives
                      are allowed to ignore this request without an error.
-                     Fixed parsing some CLI options to allow empty units like previous versions.
+                     Fixed parsing some CLI options to allow empty units like previous versions.
+v2.9.2  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Defect_Version_History.txt

@@ -24,4 +24,7 @@ v1.0.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      the exit code is not set to 0 (success) when all the devices were skipped.
                      Implemented a workaround for old drives that support both read long/write long and the
                      write uncorrectable ext commands, but fail write uncorrectable to retry as needed.
-                     
+v1.0.1  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Erase_Version_History.txt

@@ -281,4 +281,11 @@ v4.7.1  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      the exit code is not set to 0 (success) when all the devices were skipped.
                      Added additional logic to --performQuickestErase so that it can handle when certain commands
                      are not allowed on a given adapter or OS to choose a different option.
-                     Fixed a logic error with TRIM/Deallocate commands to NVMe devices in Windows.
+                     Fixed a logic error with TRIM/Deallocate commands to NVMe devices in Windows.
+v4.7.3  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Firmware_Version_History.txt

@@ -230,4 +230,14 @@ v4.3.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      compatible with security requirements when reading or writing a file.
                      Fixed a crash when reading/writing files located at / in unix-like systems.
                      Fixed exit code when -d all or --modelMatch are used but all devices are skipped so that 
-                     the exit code is not set to 0 (success) when all the devices were skipped.
+                     the exit code is not set to 0 (success) when all the devices were skipped.
+v4.3.2  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Fixed incorrect protocol specified in ATA download microcode passthrough command. This causes firmware updates
+                     to hang when the device does not support the download DMA command.
+                     Fixed NVMe firmware update in Windows 11 23H2 and 24H2.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Format_Version_History.txt

@@ -207,4 +207,15 @@ v3.3.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Added exclusive open for set sector size and fast format to reduce likelyhood of a reset while
                      these operations are running.
                      Added additional error checking when changing SAS sector size to confirm the drive accepted the
-                     correct size. ex: setting 4k, but drive formats to 528 instead due to not reporting an error.
+                     correct size. ex: setting 4k, but drive formats to 528 instead due to not reporting an error.
+v3.4.0  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Fixed incorrect protocol specified in ATA download microcode passthrough command. This causes firmware updates
+                     to hang when the device does not support the download DMA command.
+                     Fixed NVMe firmware update in Windows 11 23H2 and 24H2.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.
+                     Added missing option to run remove elements and modify zones for zoned devices.

docs/openSeaChest/openSeaChest_GenericTests_Version_History.txt

@@ -221,4 +221,9 @@ v2.4.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Fixed a crash when reading/writing files located at / in unix-like systems.
                      Fixed exit code when -d all or --modelMatch are used but all devices are skipped so that 
                      the exit code is not set to 0 (success) when all the devices were skipped.
-                     Fixed parsing some CLI options to allow empty units like previous versions.
+                     Fixed parsing some CLI options to allow empty units like previous versions.
+v2.4.1  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Info_Version_History.txt

@@ -195,4 +195,9 @@ v2.9.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      the exit code is not set to 0 (success) when all the devices were skipped.
                      Added options to reset SATA phy event counters log and reset supported SATA device statistics
                      to their default values. This can be useful when checking for CRC errors.
-                     --deviceStatistics option will show ^ for statistics that support reset.
+                     --deviceStatistics option will show ^ for statistics that support reset.
+v2.9.1  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_Logs_Version_History.txt

@@ -76,4 +76,11 @@ v2.6.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Fixed a crash when reading/writing files located at / in unix-like systems.
                      Fixed exit code when -d all or --modelMatch are used but all devices are skipped so that 
                      the exit code is not set to 0 (success) when all the devices were skipped.
-                     Fixed parsing some CLI options to allow empty units like previous versions.
+                     Fixed parsing some CLI options to allow empty units like previous versions.
+v2.6.2  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed a check for reading correct mode page which may cause changing some SAS features to fail.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.

docs/openSeaChest/openSeaChest_NVMe_Version_History.txt

@@ -117,4 +117,11 @@ v3.0.0  28-May-2025  Added support for low-level SCSI rescan in Linux when passi
                      Fixed exit code when -d all or --modelMatch are used but all devices are skipped so that 
                      the exit code is not set to 0 (success) when all the devices were skipped.
                      Fixed parsing some CLI options to allow empty units like previous versions.
-                     Changed pulling telemetry log to save to a file and allow up to data area 4.
+                     Changed pulling telemetry log to save to a file and allow up to data area 4.
+v3.0.2  07-Jul-2025  Fixed a bug with scan not showing any output in specific circumstances where number of successfully
+                     enumerated devices is equivalent to the number of unsuccessfully enumerated devices.
+                     Added new exit code for when paths are detected as insecure to be resolved by the user before
+                     files will be accessed in these directories (see https://github.com/Seagate/openSeaChest/wiki/Secure-File-And-Path).
+                     Fixed NVMe firmware update in Windows 11 23H2 and 24H2.
+                     Disabled extra CSMI related device scan in Windows that can cause a hang on some chipsets.
+                     Added some more legacy USB devices to list of known devices to support these better when they are used.