diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..55f127b
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,12 @@
+*.mpy
+.idea
+__pycache__
+_build
+*.pyc
+.env
+build*
+bundles
+*.DS_Store
+.eggs
+dist
+**/*.egg-info
\ No newline at end of file
diff --git a/.pylintrc b/.pylintrc
new file mode 100644
index 0000000..039eaec
--- /dev/null
+++ b/.pylintrc
@@ -0,0 +1,433 @@
+[MASTER]
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code
+extension-pkg-whitelist=
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS
+
+# Add files or directories matching the regex patterns to the blacklist. The
+# regex matches against base names, not paths.
+ignore-patterns=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Use multiple processes to speed up Pylint.
+# jobs=1
+jobs=2
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# Specify a configuration file.
+#rcfile=
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once).You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use"--disable=all --enable=classes
+# --disable=W"
+# disable=import-error,print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call
+disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call,import-error
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=
+
+
+[REPORTS]
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details
+#msg-template=
+
+# Set the output format. Available formats are text, parseable, colorized, json
+# and msvs (visual studio).You can also give a reporter class, eg
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Tells whether to display a full report or only the messages
+reports=no
+
+# Activate the evaluation score.
+score=yes
+
+
+[REFACTORING]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+
+[LOGGING]
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format
+logging-modules=logging
+
+
+[SPELLING]
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+# notes=FIXME,XXX,TODO
+notes=FIXME,XXX
+
+
+[TYPECHECK]
+
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
+
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis. It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=board
+
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
+
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
+
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid to define new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,_cb
+
+# A regular expression matching the name of dummy variables (i.e. expectedly
+# not used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,future.builtins
+
+
+[FORMAT]
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+# expected-line-ending-format=
+expected-line-ending-format=LF
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Number of spaces of indent required inside a hanging  or continued line.
+indent-after-paren=4
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Maximum number of lines in a module
+max-module-lines=1000
+
+# List of optional constructs for which whitespace checking is disabled. `dict-
+# separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
+# `trailing-comma` allows a space between comma and closing bracket: (a, ).
+# `empty-line` allows space-only lines.
+no-space-check=trailing-comma,dict-separator
+
+# Allow the body of a class to be on the same line as the declaration if body
+# contains single statement.
+single-line-class-stmt=no
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+
+[SIMILARITIES]
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+
+[BASIC]
+
+# Naming hint for argument names
+argument-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Regular expression matching correct argument names
+argument-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Naming hint for attribute names
+attr-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Regular expression matching correct attribute names
+attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Bad variable names which should always be refused, separated by a comma
+bad-names=foo,bar,baz,toto,tutu,tata
+
+# Naming hint for class attribute names
+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Regular expression matching correct class attribute names
+class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Naming hint for class names
+# class-name-hint=[A-Z_][a-zA-Z0-9]+$
+class-name-hint=[A-Z_][a-zA-Z0-9_]+$
+
+# Regular expression matching correct class names
+# class-rgx=[A-Z_][a-zA-Z0-9]+$
+class-rgx=[A-Z_][a-zA-Z0-9_]+$
+
+# Naming hint for constant names
+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Regular expression matching correct constant names
+const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+# Naming hint for function names
+function-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Regular expression matching correct function names
+function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Good variable names which should always be accepted, separated by a comma
+# good-names=i,j,k,ex,Run,_
+good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_
+
+# Include a hint for the correct naming format with invalid-name
+include-naming-hint=no
+
+# Naming hint for inline iteration names
+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
+
+# Regular expression matching correct inline iteration names
+inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
+
+# Naming hint for method names
+method-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Regular expression matching correct method names
+method-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Naming hint for module names
+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Regular expression matching correct module names
+module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# List of decorators that produce properties, such as abc.abstractproperty. Add
+# to this list to register other decorators that produce valid properties.
+property-classes=abc.abstractproperty
+
+# Naming hint for variable names
+variable-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+# Regular expression matching correct variable names
+variable-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
+
+
+[IMPORTS]
+
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Deprecated modules which should not be used, separated by a comma
+deprecated-modules=optparse,tkinter.tix
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled)
+ext-import-graph=
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled)
+import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled)
+int-import-graph=
+
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,__new__,setUp
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+# max-attributes=7
+max-attributes=11
+
+# Maximum number of boolean expressions in a if statement
+max-bool-expr=5
+
+# Maximum number of branch for function / method body
+max-branches=12
+
+# Maximum number of locals for function / method body
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body
+max-returns=6
+
+# Maximum number of statements in function / method body
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=1
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "Exception"
+overgeneral-exceptions=Exception
diff --git a/.readthedocs.yml b/.readthedocs.yml
new file mode 100644
index 0000000..f4243ad
--- /dev/null
+++ b/.readthedocs.yml
@@ -0,0 +1,3 @@
+python:
+    version: 3
+requirements_file: requirements.txt
diff --git a/.travis.yml b/.travis.yml
new file mode 100644
index 0000000..c3f40dc
--- /dev/null
+++ b/.travis.yml
@@ -0,0 +1,48 @@
+# This is a common .travis.yml for generating library release zip files for
+# CircuitPython library releases using circuitpython-build-tools.
+# See https://github.com/adafruit/circuitpython-build-tools for detailed setup
+# instructions.
+
+dist: xenial
+language: python
+python:
+  - "3.6"
+
+cache:
+  pip: true
+
+# TODO: if deployment to PyPi is desired, change 'DEPLOY_PYPI' to "true",
+#       or remove the env block entirely and remove the condition in the
+#       deploy block.
+env:
+  - DEPLOY_PYPI="false"
+
+deploy:
+  - provider: releases
+    api_key: "$GITHUB_TOKEN"
+    file_glob: true
+    file: "$TRAVIS_BUILD_DIR/bundles/*"
+    skip_cleanup: true
+    overwrite: true
+    on:
+      tags: true
+  # TODO: Use 'travis encrypt --com -r adafruit/<repo slug>' to generate
+  #       the encrypted password for adafruit-travis. Paste result below.
+  - provider: pypi
+    user: adafruit-travis
+    password:
+      secure: #-- PASTE ENCRYPTED PASSWORD HERE --#
+    on:
+      tags: true
+      condition: $DEPLOY_PYPI = "true"
+
+install:
+  - pip install -r requirements.txt
+  - pip install circuitpython-build-tools Sphinx sphinx-rtd-theme
+  - pip install --force-reinstall pylint==1.9.2
+
+script:
+  - pylint adafruit_rgbled.py
+  - ([[ ! -d "examples" ]] || pylint --disable=missing-docstring,invalid-name,bad-whitespace examples/*.py)
+  - circuitpython-build-bundles --filename_prefix adafruit-circuitpython-rgbled --library_location .
+  - cd docs && sphinx-build -E -W -b html . _build/html && cd ..
diff --git a/CODE_OF_CONDUCT.md b/CODE_OF_CONDUCT.md
new file mode 100644
index 0000000..7ca3a1d
--- /dev/null
+++ b/CODE_OF_CONDUCT.md
@@ -0,0 +1,127 @@
+# Adafruit Community Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and leaders pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, gender identity and expression, level or type of
+experience, education, socio-economic status, nationality, personal appearance,
+race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+We are committed to providing a friendly, safe and welcoming environment for
+all.
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Be kind and courteous to others
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Collaborating with other community members
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and sexual attention or advances
+* The use of inappropriate images, including in a community member's avatar
+* The use of inappropriate language, including in a community member's nickname
+* Any spamming, flaming, baiting or other attention-stealing behavior
+* Excessive or unwelcome helping; answering outside the scope of the question
+  asked
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate
+
+The goal of the standards and moderation guidelines outlined here is to build
+and maintain a respectful community. We ask that you don’t just aim to be
+"technically unimpeachable", but rather try to be your best self.
+
+We value many things beyond technical expertise, including collaboration and
+supporting others within our community. Providing a positive experience for
+other community members can have a much more significant impact than simply
+providing the correct answer.
+
+## Our Responsibilities
+
+Project leaders are responsible for clarifying the standards of acceptable
+behavior and are expected to take appropriate and fair corrective action in
+response to any instances of unacceptable behavior.
+
+Project leaders have the right and responsibility to remove, edit, or
+reject messages, comments, commits, code, issues, and other contributions
+that are not aligned to this Code of Conduct, or to ban temporarily or
+permanently any community member for other behaviors that they deem
+inappropriate, threatening, offensive, or harmful.
+
+## Moderation
+
+Instances of behaviors that violate the Adafruit Community Code of Conduct
+may be reported by any member of the community. Community members are
+encouraged to report these situations, including situations they witness
+involving other community members.
+
+You may report in the following ways:
+
+In any situation, you may send an email to <support@adafruit.com>.
+
+On the Adafruit Discord, you may send an open message from any channel
+to all Community Helpers by tagging @community moderators. You may also send an
+open message from any channel, or a direct message to @kattni#1507,
+@tannewt#4653, @Dan Halbert#1614, @cater#2442, @sommersoft#0222, or
+@Andon#8175.
+
+Email and direct message reports will be kept confidential.
+
+In situations on Discord where the issue is particularly egregious, possibly
+illegal, requires immediate action, or violates the Discord terms of service,
+you should also report the message directly to Discord.
+
+These are the steps for upholding our community’s standards of conduct.
+
+1. Any member of the community may report any situation that violates the
+Adafruit Community Code of Conduct. All reports will be reviewed and
+investigated.
+2. If the behavior is an egregious violation, the community member who
+committed the violation may be banned immediately, without warning.
+3. Otherwise, moderators will first respond to such behavior with a warning.
+4. Moderators follow a soft "three strikes" policy - the community member may
+be given another chance, if they are receptive to the warning and change their
+behavior.
+5. If the community member is unreceptive or unreasonable when warned by a
+moderator, or the warning goes unheeded, they may be banned for a first or
+second offense. Repeated offenses will result in the community member being
+banned.
+
+## Scope
+
+This Code of Conduct and the enforcement policies listed above apply to all
+Adafruit Community venues. This includes but is not limited to any community
+spaces (both public and private), the entire Adafruit Discord server, and
+Adafruit GitHub repositories. Examples of Adafruit Community spaces include
+but are not limited to meet-ups, audio chats on the Adafruit Discord, or
+interaction at a conference.
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. As a community
+member, you are representing our community, and are expected to behave
+accordingly.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 1.4, available at
+<https://www.contributor-covenant.org/version/1/4/code-of-conduct.html>,
+and the [Rust Code of Conduct](https://www.rust-lang.org/en-US/conduct.html).
+
+For other projects adopting the Adafruit Community Code of
+Conduct, please contact the maintainers of those projects for enforcement.
+If you wish to use this code of conduct for your own project, consider
+explicitly mentioning your moderation policy or making a copy with your
+own moderation policy so as to avoid confusion.
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..d4fbf1d
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2019 Brent Rubell for Adafruit Industries
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
diff --git a/README.md b/README.md
deleted file mode 100644
index 05fd984..0000000
--- a/README.md
+++ /dev/null
@@ -1 +0,0 @@
-# CircuitPython_RGBLED
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..a990f5f
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,171 @@
+CircuitPython_RGBLED
+====================
+
+.. image:: https://readthedocs.org/projects/adafruit-circuitpython-rgbled/badge/?version=latest
+    :target: https://circuitpython.readthedocs.io/projects/rgbled/en/latest/
+    :alt: Documentation Status
+
+.. image:: https://img.shields.io/discord/327254708534116352.svg
+    :target: https://discord.gg/nBQh6qu
+    :alt: Discord
+
+.. image:: https://travis-ci.com/adafruit/Adafruit_CircuitPython_RGBLED.svg?branch=master
+    :target: https://travis-ci.com/adafruit/Adafruit_CircuitPython_RGBLED
+    :alt: Build Status
+
+CircuitPython driver for RGB LEDs. Works with native microcontroller pins,
+`Adafruit Blinka <https://github.com/adafruit/Adafruit_Blinka>`_, or the `PCA9685 PWM driver <https://www.adafruit.com/product/815>`_.
+
+Dependencies
+=============
+This driver depends on:
+
+* `Adafruit CircuitPython <https://github.com/adafruit/circuitpython>`_
+* `SimpleIO Library <https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO>`_
+
+Please ensure all dependencies are available on the CircuitPython filesystem.
+This is easily achieved by downloading
+`the Adafruit library and driver bundle <https://github.com/adafruit/Adafruit_CircuitPython_Bundle>`_.
+
+Installing from PyPI
+--------------------
+On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally `from
+PyPI <https://pypi.org/project/adafruit-circuitpython-rgbled/>`_. To install for current user:
+
+.. code-block:: shell
+
+    pip3 install adafruit-circuitpython-rgbled
+
+To install system-wide (this may be required in some cases):
+
+.. code-block:: shell
+
+    sudo pip3 install adafruit-circuitpython-rgbled
+
+To install in a virtual environment in your current project:
+
+.. code-block:: shell
+
+    mkdir project-name && cd project-name
+    python3 -m venv .env
+    source .env/bin/activate
+    pip3 install adafruit-circuitpython-rgbled
+
+Usage Example
+==============
+
+Initialize a common-cathode RGB LED with three PWM-capable pins.
+
+.. code-block:: python
+
+    import board
+    import adafruit_rgbled
+
+    # Pin the Red LED is connected to
+    RED_LED = board.D5
+
+    # Pin the Green LED is connected to
+    GREEN_LED = board.D6
+
+    # Pin the Blue LED is connected to
+    BLUE_LED = board.D7
+
+    # Create a RGB LED object
+    led = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+
+Initialize a common-anode RGB LED with three PWM-capable pins 
+
+.. code-block:: python
+
+    import board
+    import adafruit_rgbled
+
+    # Pin the Red LED is connected to
+    RED_LED = board.D5
+
+    # Pin the Green LED is connected to
+    GREEN_LED = board.D6
+
+    # Pin the Blue LED is connected to
+    BLUE_LED = board.D7
+
+    # Create a RGB LED object
+    led = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED, invert_pwm = True)
+
+Set the RGB LED's color to a RGB Tuple (Red, Green, Blue).
+
+.. code-block:: python
+
+    led.color = (255, 0, 0)
+
+Set the RGB LED's color to a 24-bit integer (in hex syntax), 0x100000.
+
+.. code-block:: python
+    
+    led.color = 0x100000
+
+Setting a common-anode RGB LED using a ContextManager:
+
+.. code-block:: python
+
+    import board
+    import adafruit_rgbled
+    with adafruit_rgbled.RGBLED(board.D5, board.D6, board.D7, invert_pwm = True) as rgb_led:
+        rgb_led.color = (0, 255, 0)
+
+Contributing
+============
+
+Contributions are welcome! Please read our `Code of Conduct
+<https://github.com/adafruit/Adafruit_CircuitPython_RGBLED/blob/master/CODE_OF_CONDUCT.md>`_
+before contributing to help this project stay welcoming.
+
+Building locally
+================
+
+Zip release files
+-----------------
+
+To build this library locally you'll need to install the
+`circuitpython-build-tools <https://github.com/adafruit/circuitpython-build-tools>`_ package.
+
+.. code-block:: shell
+
+    python3 -m venv .env
+    source .env/bin/activate
+    pip install circuitpython-build-tools
+
+Once installed, make sure you are in the virtual environment:
+
+.. code-block:: shell
+
+    source .env/bin/activate
+
+Then run the build:
+
+.. code-block:: shell
+
+    circuitpython-build-bundles --filename_prefix adafruit-circuitpython-rgbled --library_location .
+
+Sphinx documentation
+-----------------------
+
+Sphinx is used to build the documentation based on rST files and comments in the code. First,
+install dependencies (feel free to reuse the virtual environment from above):
+
+.. code-block:: shell
+
+    python3 -m venv .env
+    source .env/bin/activate
+    pip install Sphinx sphinx-rtd-theme
+
+Now, once you have the virtual environment activated:
+
+.. code-block:: shell
+
+    cd docs
+    sphinx-build -E -W -b html . _build/html
+
+This will output the documentation to ``docs/_build/html``. Open the index.html in your browser to
+view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to
+locally verify it will pass.
diff --git a/adafruit_rgbled.py b/adafruit_rgbled.py
new file mode 100644
index 0000000..23632b1
--- /dev/null
+++ b/adafruit_rgbled.py
@@ -0,0 +1,170 @@
+# The MIT License (MIT)
+#
+# Copyright (c) 2019 Brent Rubell for Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_rgbled`
+================================================================================
+
+CircuitPython driver for RGB LEDs
+
+* Author(s): Brent Rubell
+
+Implementation Notes
+--------------------
+
+**Software and Dependencies:**
+
+* Adafruit CircuitPython firmware for the supported boards:
+  https://github.com/adafruit/circuitpython/releases
+
+* Adafruit's SimpleIO library: https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO
+"""
+from pulseio import PWMOut
+from simpleio import map_range
+
+__version__ = "0.0.0-auto.0"
+__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_RGBLED.git"
+
+class RGBLED:
+    """
+    Creates a RGBLED object given three physical pins or PWMOut objects.
+
+    :param red_pin: The physical pin connected to a red LED anode.
+    :type ~microcontroller.Pin: Microcontroller's red_pin.
+    :type pulseio.PWMOut: PWMOut object associated with red_pin.
+    :type PWMChannel: PCA9685 PWM channel associated with red_pin.
+    :param green_pin: The physical pin connected to a green LED anode.
+    :type ~microcontroller.Pin: Microcontroller's green_pin.
+    :type pulseio.PWMOut: PWMOut object associated with green_pin.
+    :type PWMChannel: PCA9685 PWM channel associated with green_pin.
+    :param blue_pin: The physical pin connected to a blue LED anode.
+    :type ~microcontroller.Pin: Microcontroller's blue_pin.
+    :type pulseio.PWMOut: PWMOut object associated with blue_pin.
+    :type PWMChannel: PCA9685 PWM channel associated with blue_pin.
+    :param bool invert_pwm: False if the RGB LED is common cathode,
+        true if the RGB LED is common anode.
+
+    Example for setting a RGB LED using a RGB Tuple (Red, Green, Blue):
+
+    .. code-block:: python
+
+        import board
+        import adafruit_rgbled
+
+        RED_LED = board.D5
+        GREEN_LED = board.D6
+        BLUE_LED = board.D7
+
+        # Create a RGB LED object
+        led = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+        led.color = (255, 0, 0)
+
+    Example for setting a RGB LED using a 24-bit integer (hex syntax):
+
+    .. code-block:: python
+
+        import board
+        import adafruit_rgbled
+
+        RED_LED = board.D5
+        GREEN_LED = board.D6
+        BLUE_LED = board.D7
+
+        # Create a RGB LED object
+        led = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
+        led.color = 0x100000
+
+    Example for setting a RGB LED using a ContextManager:
+
+    .. code-block:: python
+
+        import board
+        import adafruit_rgbled
+        with adafruit_rgbled.RGBLED(board.D5, board.D6, board.D7) as rgb_led:
+            rgb_led.color = (255, 0, 0)
+
+    Example for setting a common-anode RGB LED using a ContextManager:
+
+    .. code-block:: python
+
+        import board
+        import adafruit_rgbled
+        with adafruit_rgbled.RGBLED(board.D5, board.D6, board.D7, invert_pwm=True) as rgb_led:
+            rgb_led.color = (0, 255, 0)
+
+    """
+    def __init__(self, red_pin, green_pin, blue_pin, invert_pwm=False):
+        self._rgb_led_pins = [red_pin, green_pin, blue_pin]
+        for i in range(len(self._rgb_led_pins)):
+            if hasattr(self._rgb_led_pins[i], 'frequency'):
+                self._rgb_led_pins[i].duty_cycle = 0
+            elif str(type(self._rgb_led_pins[i])) == "<class 'Pin'>":
+                self._rgb_led_pins[i] = PWMOut(self._rgb_led_pins[i])
+                self._rgb_led_pins[i].duty_cycle = 0
+            else:
+                raise TypeError('Must provide a pin, PWMOut, or PWMChannel.')
+        self._invert_pwm = invert_pwm
+        self._current_color = (0, 0, 0)
+        self.color = self._current_color
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exception_type, exception_value, traceback):
+        self.deinit()
+
+    def deinit(self):
+        """Turn the LEDs off, deinit pwmout and release hardware resources."""
+        for pin in self._rgb_led_pins:
+            pin.deinit() #pylint: no-member
+        self._current_color = (0, 0, 0)
+
+    @property
+    def color(self):
+        """Returns the RGB LED's current color."""
+        return self._current_color
+
+    @color.setter
+    def color(self, value):
+        """Sets the RGB LED to a desired color.
+        :param type value: RGB LED desired value - can be a RGB tuple or a 24-bit integer.
+        """
+        self._current_color = value
+        if isinstance(value, tuple):
+            for i in range(0, 3):
+                color = int(map_range(value[i], 0, 255, 0, 65535))
+                if self._invert_pwm:
+                    color -= 65535
+                self._rgb_led_pins[i].duty_cycle = abs(color)
+        elif isinstance(value, int):
+            if value>>24:
+                raise ValueError("Only bits 0->23 valid for integer input")
+            r = value >> 16
+            g = (value >> 8) & 0xff
+            b = value & 0xff
+            rgb = [r, g, b]
+            for color in range(0, 3):
+                rgb[color] = int(map_range(rgb[color], 0, 255, 0, 65535))
+                if self._invert_pwm:
+                    rgb[color] -= 65535
+                self._rgb_led_pins[color].duty_cycle = abs(rgb[color])
+        else:
+            raise ValueError('Color must be a tuple or 24-bit integer value.')
diff --git a/docs/_static/favicon.ico b/docs/_static/favicon.ico
new file mode 100644
index 0000000..5aca983
Binary files /dev/null and b/docs/_static/favicon.ico differ
diff --git a/docs/api.rst b/docs/api.rst
new file mode 100644
index 0000000..57aec1e
--- /dev/null
+++ b/docs/api.rst
@@ -0,0 +1,8 @@
+
+.. If you created a package, create one automodule per module in the package.
+
+.. If your library file(s) are nested in a directory (e.g. /adafruit_foo/foo.py)
+.. use this format as the module name: "adafruit_foo.foo"
+
+.. automodule:: adafruit_rgbled
+   :members:
diff --git a/docs/conf.py b/docs/conf.py
new file mode 100644
index 0000000..00bd13a
--- /dev/null
+++ b/docs/conf.py
@@ -0,0 +1,160 @@
+# -*- coding: utf-8 -*-
+
+import os
+import sys
+sys.path.insert(0, os.path.abspath('..'))
+
+# -- General configuration ------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.napoleon',
+    'sphinx.ext.todo',
+]
+
+# TODO: Please Read!
+# Uncomment the below if you use native CircuitPython modules such as
+# digitalio, micropython and busio. List the modules you use. Without it, the
+# autodoc module docs will fail to generate with a warning.
+autodoc_mock_imports = ["pulseio"]
+
+
+intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)}
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Adafruit RGBLED Library'
+copyright = u'2019 Brent Rubell'
+author = u'Brent Rubell'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = u'1.0'
+# The full version, including alpha/beta/rc tags.
+release = u'1.0'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store', '.env', 'CODE_OF_CONDUCT.md']
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#
+default_role = "any"
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#
+add_function_parentheses = True
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+# If this is True, todo emits a warning for each TODO entries. The default is False.
+todo_emit_warnings = True
+
+napoleon_numpy_docstring = False
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
+
+if not on_rtd:  # only import and set the theme if we're building docs locally
+    try:
+        import sphinx_rtd_theme
+        html_theme = 'sphinx_rtd_theme'
+        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.']
+    except:
+        html_theme = 'default'
+        html_theme_path = ['.']
+else:
+    html_theme_path = ['.']
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# The name of an image file (relative to this directory) to use as a favicon of
+# the docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#
+html_favicon = '_static/favicon.ico'
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'AdafruitRgbledLibrarydoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+     # The paper size ('letterpaper' or 'a4paper').
+     #
+     # 'papersize': 'letterpaper',
+
+     # The font size ('10pt', '11pt' or '12pt').
+     #
+     # 'pointsize': '10pt',
+
+     # Additional stuff for the LaTeX preamble.
+     #
+     # 'preamble': '',
+
+     # Latex figure (float) alignment
+     #
+     # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'AdafruitRGBLEDLibrary.tex', u'AdafruitRGBLED Library Documentation',
+     author, 'manual'),
+]
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'AdafruitRGBLEDlibrary', u'Adafruit RGBLED Library Documentation',
+     [author], 1)
+]
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'AdafruitRGBLEDLibrary', u'Adafruit RGBLED Library Documentation',
+     author, 'AdafruitRGBLEDLibrary', 'One line description of project.',
+     'Miscellaneous'),
+]
diff --git a/docs/examples.rst b/docs/examples.rst
new file mode 100644
index 0000000..376b1e0
--- /dev/null
+++ b/docs/examples.rst
@@ -0,0 +1,8 @@
+Simple test
+------------
+
+Ensure your device works with this simple test.
+
+.. literalinclude:: ../examples/rgbled_simpletest.py
+    :caption: examples/rgbled_simpletest.py
+    :linenos:
diff --git a/docs/index.rst b/docs/index.rst
new file mode 100644
index 0000000..1435e6d
--- /dev/null
+++ b/docs/index.rst
@@ -0,0 +1,45 @@
+.. include:: ../README.rst
+
+Table of Contents
+=================
+
+.. toctree::
+    :maxdepth: 4
+    :hidden:
+
+    self
+
+.. toctree::
+    :caption: Examples
+
+    examples
+
+.. toctree::
+    :caption: API Reference
+    :maxdepth: 3
+
+    api
+
+.. toctree::
+    :caption: Tutorials
+
+.. toctree::
+    :caption: Related Products
+
+.. toctree::
+    :caption: Other Links
+
+    Download <https://github.com/adafruit/Adafruit_CircuitPython_RGBLED/releases/latest>
+    CircuitPython Reference Documentation <https://circuitpython.readthedocs.io>
+    CircuitPython Support Forum <https://forums.adafruit.com/viewforum.php?f=60>
+    Discord Chat <https://adafru.it/discord>
+    Adafruit Learning System <https://learn.adafruit.com>
+    Adafruit Blog <https://blog.adafruit.com>
+    Adafruit Store <https://www.adafruit.com>
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
diff --git a/examples/rgbled_blink.py b/examples/rgbled_blink.py
new file mode 100755
index 0000000..27d3f9e
--- /dev/null
+++ b/examples/rgbled_blink.py
@@ -0,0 +1,26 @@
+# This example shows how to create a single RGB LED with a specific color channel
+# order and blink it.
+import time
+import board
+import adafruit_rgbled
+
+# Configure the setup
+RED_LED = board.D5      # Pin the Red LED is connected to
+GREEN_LED = board.D6    # Pin the Green LED is connected to
+BLUE_LED = board.D7     # Pin the Blue LED is connected to
+COLOR = (100, 50, 150)  # color to blink
+CLEAR = (0, 0, 0)       # clear (or second color)
+DELAY = 0.25            # blink rate in seconds
+
+# Create the RGB LED object
+led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED)
+
+# Optionally, you can also create the RGB LED object with inverted PWM
+# led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED, invert_pwm=True)
+
+# Loop forever and blink the color
+while True:
+    led.color = COLOR
+    time.sleep(DELAY)
+    led.color = CLEAR
+    time.sleep(DELAY)
diff --git a/examples/rgbled_pca9685.py b/examples/rgbled_pca9685.py
new file mode 100644
index 0000000..87d5c05
--- /dev/null
+++ b/examples/rgbled_pca9685.py
@@ -0,0 +1,67 @@
+import time
+import board
+import busio
+import adafruit_pca9685
+import adafruit_rgbled
+
+# PCA9685 Initialization
+i2c = busio.I2C(board.SCL, board.SDA)
+pca = adafruit_pca9685.PCA9685(i2c)
+pca.frequency=60
+
+# PCA9685 LED Channels
+RED_LED = pca.channels[0]
+GREEN_LED = pca.channels[1]
+BLUE_LED = pca.channels[2]
+
+# Create the RGB LED object
+led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED, invert_pwm=True)
+
+# Optionally, you can also create the RGB LED object with inverted PWM
+# led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED, invert_pwm=True)
+
+def wheel(pos):
+    # Input a value 0 to 255 to get a color value.
+    # The colours are a transition r - g - b - back to r.
+    if pos < 0 or pos > 255:
+        return 0, 0, 0
+    if pos < 85:
+        return int(255 - pos * 3), int(pos * 3), 0
+    if pos < 170:
+        pos -= 85
+        return 0, int(255 - pos * 3), int(pos * 3)
+    pos -= 170
+    return int(pos * 3), 0, int(255 - (pos * 3))
+
+def rainbow_cycle(wait):
+    for i in range(255):
+        i = (i + 1) % 256
+        led.color = wheel(i)
+        time.sleep(wait)
+
+while True:
+    # setting RGB LED color to RGB Tuples (R, G, B)
+    print('setting color 1')
+    led.color = (255, 0, 0)
+    time.sleep(1)
+
+    print('setting color 2')
+    led.color = (0, 255, 0)
+    time.sleep(1)
+
+    print('setting color 3')
+    led.color = (0, 0, 255)
+    time.sleep(1)
+
+    # setting RGB LED color to 24-bit integer values
+    led.color = 0xFF0000
+    time.sleep(1)
+
+    led.color = 0x00FF00
+    time.sleep(1)
+
+    led.color = 0x0000FF
+    time.sleep(1)
+
+    # rainbow cycle the RGB LED
+    rainbow_cycle(0.01)
diff --git a/examples/rgbled_simpletest.py b/examples/rgbled_simpletest.py
new file mode 100644
index 0000000..f4cd4ee
--- /dev/null
+++ b/examples/rgbled_simpletest.py
@@ -0,0 +1,61 @@
+import time
+import board
+import adafruit_rgbled
+
+# Pin the Red LED is connected to
+RED_LED = board.D5
+
+# Pin the Green LED is connected to
+GREEN_LED = board.D6
+
+# Pin the Blue LED is connected to
+BLUE_LED = board.D7
+
+# Create the RGB LED object
+led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED)
+
+# Optionally, you can also create the RGB LED object with inverted PWM
+# led = adafruit_rgbled.RGBLED(RED_LED, GREEN_LED, BLUE_LED, invert_pwm=True)
+
+def wheel(pos):
+    # Input a value 0 to 255 to get a color value.
+    # The colours are a transition r - g - b - back to r.
+    if pos < 0 or pos > 255:
+        return 0, 0, 0
+    if pos < 85:
+        return int(255 - pos * 3), int(pos * 3), 0
+    if pos < 170:
+        pos -= 85
+        return 0, int(255 - pos * 3), int(pos * 3)
+    pos -= 170
+    return int(pos * 3), 0, int(255 - (pos * 3))
+
+def rainbow_cycle(wait):
+    for i in range(255):
+        i = (i + 1) % 256
+        led.color = wheel(i)
+        time.sleep(wait)
+
+while True:
+    # setting RGB LED color to RGB Tuples (R, G, B)
+    led.color = (255, 0, 0)
+    time.sleep(1)
+
+    led.color = (0, 255, 0)
+    time.sleep(1)
+
+    led.color = (0, 0, 255)
+    time.sleep(1)
+
+    # setting RGB LED color to 24-bit integer values
+    led.color = 0xFF0000
+    time.sleep(1)
+
+    led.color = 0x00FF00
+    time.sleep(1)
+
+    led.color = 0x0000FF
+    time.sleep(1)
+
+    # rainbow cycle the RGB LED
+    rainbow_cycle(0.1)
diff --git a/requirements.txt b/requirements.txt
new file mode 100644
index 0000000..3e78577
--- /dev/null
+++ b/requirements.txt
@@ -0,0 +1,2 @@
+Adafruit-Blinka
+adafruit-circuitpython-simpleio
\ No newline at end of file
diff --git a/setup.py b/setup.py
new file mode 100644
index 0000000..5276bfa
--- /dev/null
+++ b/setup.py
@@ -0,0 +1,63 @@
+"""A setuptools based setup module.
+
+See:
+https://packaging.python.org/en/latest/distributing.html
+https://github.com/pypa/sampleproject
+"""
+
+from setuptools import setup, find_packages
+# To use a consistent encoding
+from codecs import open
+from os import path
+
+here = path.abspath(path.dirname(__file__))
+
+# Get the long description from the README file
+with open(path.join(here, 'README.rst'), encoding='utf-8') as f:
+    long_description = f.read()
+
+setup(
+    name='adafruit-circuitpython-rgbled',
+
+    use_scm_version=True,
+    setup_requires=['setuptools_scm'],
+
+    description='CircuitPython driver for RGB LEDs',
+    long_description=long_description,
+    long_description_content_type='text/x-rst',
+
+    # The project's main homepage.
+    url='https://github.com/adafruit/Adafruit_CircuitPython_RGBLED',
+
+    # Author details
+    author='Adafruit Industries',
+    author_email='circuitpython@adafruit.com',
+
+    install_requires=[
+        'Adafruit-Blinka'
+    ],
+
+    # Choose your license
+    license='MIT',
+
+    # See https://pypi.python.org/pypi?%3Aaction=list_classifiers
+    classifiers=[
+        'Development Status :: 3 - Alpha',
+        'Intended Audience :: Developers',
+        'Topic :: Software Development :: Libraries',
+        'Topic :: System :: Hardware',
+        'License :: OSI Approved :: MIT License',
+        'Programming Language :: Python :: 3',
+        'Programming Language :: Python :: 3.4',
+        'Programming Language :: Python :: 3.5',
+    ],
+
+    # What does your project relate to?
+    keywords='adafruit blinka circuitpython micropython rgbled rgb, led, driver, pwm',
+
+    # You can just specify the packages manually here if your project is
+    # simple. Or you can use find_packages().
+    # TODO: IF LIBRARY FILES ARE A PACKAGE FOLDER,
+    #       CHANGE `py_modules=['...']` TO `packages=['...']`
+    py_modules=['adafruit_rgbled'],
+)