avrdude -c USBasp -P usb -p atmega8 -U flash:w:"usbasp-v1.06-alpha-2016-05-18-at
mega8.hex"

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9307
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be perform
ed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "usbasp-v1.06-alpha-2016-05-18-atmega8.hex"
avrdude: input file usbasp-v1.06-alpha-2016-05-18-atmega8.hex auto detected as I
ntel Hex
avrdude: writing flash (4678 bytes):

Writing | ################################################## | 100% 2.50s

avrdude: 4678 bytes of flash written
avrdude: verifying flash memory against usbasp-v1.06-alpha-2016-05-18-atmega8.he
x:
avrdude: load data flash data from input file usbasp-v1.06-alpha-2016-05-18-atme
ga8.hex:
avrdude: input file usbasp-v1.06-alpha-2016-05-18-atmega8.hex auto detected as I
ntel Hex
avrdude: input file usbasp-v1.06-alpha-2016-05-18-atmega8.hex contains 4678 byte
s
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 1.59s

avrdude: verifying ...
avrdude: 4678 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:D9, L:FF)

avrdude done.  Thank you.