net: mvpp2: implement pcs_inband_caps() method

Report the PCS in-band capabilities to phylink for Marvell PP2
interfaces.

Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: Russell King (Oracle)

drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c

@@ -6224,19 +6224,26 @@ static const struct phylink_pcs_ops mvpp2_phylink_xlg_pcs_ops = {
 	.pcs_config = mvpp2_xlg_pcs_config,
 };
 
-static int mvpp2_gmac_pcs_validate(struct phylink_pcs *pcs,
-				   unsigned long *supported,
-				   const struct phylink_link_state *state)
+static unsigned int mvpp2_gmac_pcs_inband_caps(struct phylink_pcs *pcs,
+					       phy_interface_t interface)
 {
-	/* When in 802.3z mode, we must have AN enabled:
+	/* When operating in an 802.3z mode, we must have AN enabled:
 	 * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
 	 * When <PortType> = 1 (1000BASE-X) this field must be set to 1.
+	 * Therefore, inband is "required".
 	 */
-	if (phy_interface_mode_is_8023z(state->interface) &&
-	    !phylink_test(state->advertising, Autoneg))
-		return -EINVAL;
+	if (phy_interface_mode_is_8023z(interface))
+		return LINK_INBAND_ENABLE;
 
-	return 0;
+	/* SGMII and RGMII can be configured to use inband signalling of the
+	 * AN result. Indicate these as "possible".
+	 */
+	if (interface == PHY_INTERFACE_MODE_SGMII ||
+	    phy_interface_mode_is_rgmii(interface))
+		return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE;
+
+	/* For any other modes, indicate that inband is not supported. */
+	return LINK_INBAND_DISABLE;
 }
 
 static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
@@ -6343,7 +6350,7 @@ static void mvpp2_gmac_pcs_an_restart(struct phylink_pcs *pcs)
 }
 
 static const struct phylink_pcs_ops mvpp2_phylink_gmac_pcs_ops = {
-	.pcs_validate = mvpp2_gmac_pcs_validate,
+	.pcs_inband_caps = mvpp2_gmac_pcs_inband_caps,
 	.pcs_get_state = mvpp2_gmac_pcs_get_state,
 	.pcs_config = mvpp2_gmac_pcs_config,
 	.pcs_an_restart = mvpp2_gmac_pcs_an_restart,