Make KELON (48 bit) protocol decoding stricter.

* Ensure checking of inter-message gap is being done.
  - Fixes a false positive detection.
* Code style cleanup.
* Ensure result address & commands are cleared.
* Add unit tests based on Discussion #1744
* Improve older unit tests by confirming capture code is correct.
Ref #1744

Author: crankyoldgit

src/ir_Kelon.cpp

@@ -40,7 +40,6 @@ const uint32_t kKelonGap = 2 * kDefaultMessageGap;
 const uint16_t kKelonFreq = 38000;
 
 #if SEND_KELON
-
 /// Send a Kelon message.
 /// Status: STABLE / Working.
 /// @param[in] data The data to be transmitted.
@@ -55,7 +54,6 @@ void IRsend::sendKelon(const uint64_t data, const uint16_t nbits,
               data, nbits, kKelonFreq, false,  // LSB First.
               repeat, 50);
 }
-
 #endif  // SEND_KELON
 
 #if DECODE_KELON
@@ -67,27 +65,24 @@ void IRsend::sendKelon(const uint64_t data, const uint16_t nbits,
 /// @param[in] nbits The number of data bits to expect.
 /// @param[in] strict Flag indicating if we should perform strict matching.
 /// @return True if it can decode it, false if it can't.
-
 bool IRrecv::decodeKelon(decode_results *results, uint16_t offset,
                          const uint16_t nbits, const bool strict) {
-  if (strict && nbits != kKelonBits) {
-    return false;
-  }
-  if (!matchGeneric(results->rawbuf + offset, results->state,
+  if (strict && nbits != kKelonBits) return false;
+
+  if (!matchGeneric(results->rawbuf + offset, &(results->value),
                     results->rawlen - offset, nbits,
                     kKelonHdrMark, kKelonHdrSpace,
                     kKelonBitMark, kKelonOneSpace,
                     kKelonBitMark, kKelonZeroSpace,
-                    kKelonBitMark, 0, false,
-                    _tolerance, 0, false)) {
-    return false;
-  }
+                    kKelonBitMark, kKelonGap, true,
+                    _tolerance, 0, false)) return false;
 
   results->decode_type = decode_type_t::KELON;
+  results->address = 0;
+  results->command = 0;
   results->bits = nbits;
   return true;
 }
-
 #endif  // DECODE_KELON
 
 /// Class constructor
@@ -151,21 +146,15 @@ void IRKelonAc::ensurePower(bool on) {
 #endif  // SEND_KELON
 
 /// Set up hardware to be able to send a message.
-void IRKelonAc::begin() {
-  _irsend.begin();
-}
+void IRKelonAc::begin() { _irsend.begin(); }
 
 /// Request toggling power - will be reset to false after sending
 /// @param[in] toggle Whether to toggle the power state
-void IRKelonAc::setTogglePower(const bool toggle) {
-  _.PowerToggle = toggle;
-}
+void IRKelonAc::setTogglePower(const bool toggle) { _.PowerToggle = toggle; }
 
 /// Get whether toggling power will be requested
 /// @return The power toggle state
-bool IRKelonAc::getTogglePower() const {
-  return _.PowerToggle;
-}
+bool IRKelonAc::getTogglePower() const { return _.PowerToggle; }
 
 /// Set the temperature setting.
 /// @param[in] degrees The temperature in degrees celsius.
@@ -178,9 +167,7 @@ void IRKelonAc::setTemp(const uint8_t degrees) {
 
 /// Get the current temperature setting.
 /// @return Get current setting for temp. in degrees celsius.
-uint8_t IRKelonAc::getTemp() const {
-  return _.Temperature + kKelonMinTemp;
-}
+uint8_t IRKelonAc::getTemp() const { return _.Temperature + kKelonMinTemp; }
 
 /// Set the speed of the fan.
 /// @param[in] speed 0 is auto, 1-5 is the speed
@@ -207,11 +194,10 @@ void IRKelonAc::setDryGrade(const int8_t grade) {
 
   // Two's complement is clearly too bleeding edge for this manufacturer
   uint8_t outval;
-  if (drygrade < 0) {
+  if (drygrade < 0)
     outval = 0b100 | (-drygrade & 0b011);
-  } else {
+  else
     outval = drygrade & 0b011;
-  }
   _.DehumidifierGrade = outval;
 }
 
@@ -260,9 +246,7 @@ void IRKelonAc::setMode(const uint8_t mode) {
 
 /// Get the current operation mode setting.
 /// @return The current operation mode.
-uint8_t IRKelonAc::getMode() const {
-  return _.Mode;
-}
+uint8_t IRKelonAc::getMode() const { return _.Mode; }
 
 /// Request toggling the vertical swing - will be reset to false after sending
 /// @param[in] toggle If true, the swing mode will be toggled when sent.
@@ -272,21 +256,15 @@ void IRKelonAc::setToggleSwingVertical(const bool toggle) {
 
 /// Get whether the swing mode is set to be toggled
 /// @return Whether the toggle bit is set
-bool IRKelonAc::getToggleSwingVertical() const {
-  return _.SwingVToggle;
-}
+bool IRKelonAc::getToggleSwingVertical() const { return _.SwingVToggle; }
 
 /// Control the current sleep (quiet) setting.
 /// @param[in] on The desired setting.
-void IRKelonAc::setSleep(const bool on) {
-  _.SleepEnabled = on;
-}
+void IRKelonAc::setSleep(const bool on) { _.SleepEnabled = on; }
 
 /// Is the sleep setting on?
 /// @return The current value.
-bool IRKelonAc::getSleep() const {
-  return _.SleepEnabled;
-}
+bool IRKelonAc::getSleep() const { return _.SleepEnabled; }
 
 /// Control the current super cool mode setting.
 /// @param[in] on The desired setting.
@@ -305,9 +283,7 @@ void IRKelonAc::setSupercool(const bool on) {
 
 /// Is the super cool mode setting on?
 /// @return The current value.
-bool IRKelonAc::getSupercool() const {
-  return _.SuperCoolEnabled1;
-}
+bool IRKelonAc::getSupercool() const { return _.SuperCoolEnabled1; }
 
 /// Set the timer time and enable it. Timer is an off timer if the unit is on,
 /// it is an on timer if the unit is off.
@@ -334,54 +310,39 @@ void IRKelonAc::setTimer(uint16_t mins) {
 /// later disabled.
 /// @return The timer set minutes
 uint16_t IRKelonAc::getTimer() const {
-  if (_.TimerHours >= 10) {
+  if (_.TimerHours >= 10)
     return ((uint16_t) ((_.TimerHours << 1) | _.TimerHalfHour) - 10) * 60;
-  }
   return (((uint16_t) _.TimerHours) * 60) + (_.TimerHalfHour ? 30 : 0);
 }
 
 /// Enable or disable the timer. Note that in order to enable the timer the
 /// minutes must be set with setTimer().
 /// @param[in] on Whether to enable or disable the timer
-void IRKelonAc::setTimerEnabled(bool on) {
-  _.TimerEnabled = on;
-}
+void IRKelonAc::setTimerEnabled(bool on) { _.TimerEnabled = on; }
 
 /// Get the current timer status
 /// @return Whether the timer is enabled.
-bool IRKelonAc::getTimerEnabled() const {
-  return _.TimerEnabled;
-}
-
+bool IRKelonAc::getTimerEnabled() const { return _.TimerEnabled; }
 
 /// Get the raw state of the object, suitable to be sent with the appropriate
 /// IRsend object method.
 /// @return A PTR to the internal state.
-uint64_t IRKelonAc::getRaw() const {
-  return _.raw;
-}
+uint64_t IRKelonAc::getRaw() const { return _.raw; }
 
 /// Set the raw state of the object.
 /// @param[in] new_code The raw state from the native IR message.
-void IRKelonAc::setRaw(const uint64_t new_code) {
-  _.raw = new_code;
-}
+void IRKelonAc::setRaw(const uint64_t new_code) { _.raw = new_code; }
 
 /// Convert a standard A/C mode (stdAc::opmode_t) into it a native mode.
 /// @param[in] mode A stdAc::opmode_t operation mode.
 /// @return The native mode equivalent.
 uint8_t IRKelonAc::convertMode(const stdAc::opmode_t mode) {
   switch (mode) {
-    case stdAc::opmode_t::kCool:
-      return kKelonModeCool;
-    case stdAc::opmode_t::kHeat:
-      return kKelonModeHeat;
-    case stdAc::opmode_t::kDry:
-      return kKelonModeDry;
-    case stdAc::opmode_t::kFan:
-      return kKelonModeFan;
-    default:
-      return kKelonModeSmart;
+    case stdAc::opmode_t::kCool: return kKelonModeCool;
+    case stdAc::opmode_t::kHeat: return kKelonModeHeat;
+    case stdAc::opmode_t::kDry:  return kKelonModeDry;
+    case stdAc::opmode_t::kFan:  return kKelonModeFan;
+    default:                     return kKelonModeSmart;  // aka Auto.
   }
 }
 
@@ -391,15 +352,11 @@ uint8_t IRKelonAc::convertMode(const stdAc::opmode_t mode) {
 uint8_t IRKelonAc::convertFan(stdAc::fanspeed_t fan) {
   switch (fan) {
     case stdAc::fanspeed_t::kMin:
-    case stdAc::fanspeed_t::kLow:
-      return kKelonFanMin;
-    case stdAc::fanspeed_t::kMedium:
-      return kKelonFanMedium;
+    case stdAc::fanspeed_t::kLow:    return kKelonFanMin;
+    case stdAc::fanspeed_t::kMedium: return kKelonFanMedium;
     case stdAc::fanspeed_t::kHigh:
-    case stdAc::fanspeed_t::kMax:
-      return kKelonFanMax;
-    default:
-      return kKelonFanAuto;
+    case stdAc::fanspeed_t::kMax:    return kKelonFanMax;
+    default:                         return kKelonFanAuto;
   }
 }
 
@@ -408,16 +365,11 @@ uint8_t IRKelonAc::convertFan(stdAc::fanspeed_t fan) {
 /// @return The stdAc::opmode_t equivalent.
 stdAc::opmode_t IRKelonAc::toCommonMode(const uint8_t mode) {
   switch (mode) {
-    case kKelonModeCool:
-      return stdAc::opmode_t::kCool;
-    case kKelonModeHeat:
-      return stdAc::opmode_t::kHeat;
-    case kKelonModeDry:
-      return stdAc::opmode_t::kDry;
-    case kKelonModeFan:
-      return stdAc::opmode_t::kFan;
-    default:
-      return stdAc::opmode_t::kAuto;
+    case kKelonModeCool: return stdAc::opmode_t::kCool;
+    case kKelonModeHeat: return stdAc::opmode_t::kHeat;
+    case kKelonModeDry:  return stdAc::opmode_t::kDry;
+    case kKelonModeFan:  return stdAc::opmode_t::kFan;
+    default:             return stdAc::opmode_t::kAuto;
   }
 }
 
@@ -426,14 +378,10 @@ stdAc::opmode_t IRKelonAc::toCommonMode(const uint8_t mode) {
 /// @return The stdAc::fanspeed_t equivalent.
 stdAc::fanspeed_t IRKelonAc::toCommonFanSpeed(const uint8_t speed) {
   switch (speed) {
-    case kKelonFanMin:
-      return stdAc::fanspeed_t::kLow;
-    case kKelonFanMedium:
-      return stdAc::fanspeed_t::kMedium;
-    case kKelonFanMax:
-      return stdAc::fanspeed_t::kHigh;
-    default:
-      return stdAc::fanspeed_t::kAuto;
+    case kKelonFanMin:    return stdAc::fanspeed_t::kLow;
+    case kKelonFanMedium: return stdAc::fanspeed_t::kMedium;
+    case kKelonFanMax:    return stdAc::fanspeed_t::kHigh;
+    default:              return stdAc::fanspeed_t::kAuto;
   }
 }
 
@@ -443,21 +391,20 @@ stdAc::state_t IRKelonAc::toCommon(const stdAc::state_t *prev) const {
   stdAc::state_t result{};
   result.protocol = decode_type_t::KELON;
   result.model = -1;  // Unused.
+  // AC only supports toggling it
+  result.power = (prev == nullptr || prev->power) ^ _.PowerToggle;
   result.mode = toCommonMode(getMode());
   result.celsius = true;
   result.degrees = getTemp();
   result.fanspeed = toCommonFanSpeed(getFan());
-  result.turbo = getSupercool();
-  result.sleep = getSleep() ? 0 : -1;
-  // Not supported.
-  // N/A, AC only supports toggling it
-  result.power = (prev == nullptr || prev->power) ^ _.PowerToggle;
-  // N/A, AC only supports toggling it
+  // AC only supports toggling it
   result.swingv = stdAc::swingv_t::kAuto;
   if (prev != nullptr &&
-      (prev->swingv != stdAc::swingv_t::kAuto) ^ _.SwingVToggle) {
+      (prev->swingv != stdAc::swingv_t::kAuto) ^ _.SwingVToggle)
     result.swingv = stdAc::swingv_t::kOff;
-  }
+  result.turbo = getSupercool();
+  result.sleep = getSleep() ? 0 : -1;
+  // Not supported.
   result.swingh = stdAc::swingh_t::kOff;
   result.light = true;
   result.beep = true;
@@ -483,20 +430,13 @@ String IRKelonAc::toString() const {
   result += addBoolToString(_.SleepEnabled, kSleepStr);
   result += addSignedIntToString(getDryGrade(), kDryStr);
   result += addLabeledString(
-      getTimerEnabled()
-      ? (
-          getTimer() > 0
-          ? minsToString(getTimer())
-          : kOnStr
-      )
-      : kOffStr,
+      getTimerEnabled() ? (getTimer() > 0 ? minsToString(getTimer()) : kOnStr)
+                        : kOffStr,
       kTimerStr);
   result += addBoolToString(getSupercool(), kTurboStr);
-  if (getTogglePower()) {
+  if (getTogglePower())
     result += addBoolToString(true, kPowerToggleStr);
-  }
-  if (getToggleSwingVertical()) {
+  if (getToggleSwingVertical())
     result += addBoolToString(true, kSwingVToggleStr);
-  }
   return result;
 }