fix(zigbee): Move button and led pins from defines

Author: P-R-O-C-H-Y

libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/Zigbee_Color_Dimmable_Light.ino

@@ -33,20 +33,21 @@
 
 #include "Zigbee.h"
 
-#define LED_PIN               RGB_BUILTIN
-#define BUTTON_PIN            9  // C6/H2 Boot button
-#define ZIGBEE_LIGHT_ENDPOINT 10
+/* Zigbee color dimmable light configuration */
+#define ZIGBEE_RGB_LIGHT_ENDPOINT 10
+uint8_t led = RGB_BUILTIN;
+uint8_t button = BOOT_PIN;
 
-ZigbeeColorDimmableLight zbColorLight = ZigbeeColorDimmableLight(ZIGBEE_LIGHT_ENDPOINT);
+ZigbeeColorDimmableLight zbColorLight = ZigbeeColorDimmableLight(ZIGBEE_RGB_LIGHT_ENDPOINT);
 
 /********************* RGB LED functions **************************/
 void setRGBLight(bool state, uint8_t red, uint8_t green, uint8_t blue, uint8_t level) {
   if (!state) {
-    rgbLedWrite(LED_PIN, 0, 0, 0);
+    rgbLedWrite(led, 0, 0, 0);
     return;
   }
   float brightness = (float)level / 255;
-  rgbLedWrite(LED_PIN, red * brightness, green * brightness, blue * brightness);
+  rgbLedWrite(led, red * brightness, green * brightness, blue * brightness);
 }
 
 // Create a task on identify call to handle the identify function
@@ -58,7 +59,7 @@ void identify(uint16_t time) {
     zbColorLight.restoreLight();
     return;
   }
-  rgbLedWrite(LED_PIN, 255 * blink, 255 * blink, 255 * blink);
+  rgbLedWrite(led, 255 * blink, 255 * blink, 255 * blink);
   blink = !blink;
 }
 
@@ -70,10 +71,10 @@ void setup() {
   }
 
   // Init RMT and leave light OFF
-  rgbLedWrite(LED_PIN, 0, 0, 0);
+  rgbLedWrite(led, 0, 0, 0);
 
   // Init button for factory reset
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   // Set callback function for light change
   zbColorLight.onLightChange(setRGBLight);
@@ -104,11 +105,11 @@ void setup() {
 
 void loop() {
   // Checking button for factory reset
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
     int startTime = millis();
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot

libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/Zigbee_Color_Dimmer_Switch.ino

@@ -37,9 +37,9 @@
 
 #include "Zigbee.h"
 
-/* Switch configuration */
-#define SWITCH_PIN             9  // ESP32-C6/H2 Boot button
+/* Zigbee color dimmer switch configuration */
 #define SWITCH_ENDPOINT_NUMBER 5
+uint8_t button = BOOT_PIN;
 
 /* Zigbee switch */
 ZigbeeColorDimmerSwitch zbSwitch = ZigbeeColorDimmerSwitch(SWITCH_ENDPOINT_NUMBER);
@@ -52,7 +52,7 @@ void setup() {
   }
 
   //Init button switch
-  pinMode(SWITCH_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   //Optional: set Zigbee device name and model
   zbSwitch.setManufacturerAndModel("Espressif", "ZigbeeSwitch");
@@ -84,9 +84,9 @@ void setup() {
 
 void loop() {
   // Handle button switch in loop()
-  if (digitalRead(SWITCH_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
-    while (digitalRead(SWITCH_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
     }
     // Toggle light
@@ -145,6 +145,6 @@ void loop() {
   static uint32_t last_print = 0;
   if (millis() - last_print > 30000) {
     last_print = millis();
-    zbSwitch.printBoundDevices(Serial);
+    zbSwitch.printBoundDevices();
   }
 }

libraries/Zigbee/examples/Zigbee_On_Off_Light/Zigbee_On_Off_Light.ino

@@ -32,15 +32,16 @@
 
 #include "Zigbee.h"
 
-#define LED_PIN               RGB_BUILTIN
-#define BUTTON_PIN            9  // ESP32-C6/H2 Boot button
+/* Zigbee light bulb configuration */
 #define ZIGBEE_LIGHT_ENDPOINT 10
+uint8_t led = RGB_BUILTIN;
+uint8_t button = BOOT_PIN;
 
 ZigbeeLight zbLight = ZigbeeLight(ZIGBEE_LIGHT_ENDPOINT);
 
 /********************* RGB LED functions **************************/
 void setLED(bool value) {
-  digitalWrite(LED_PIN, value);
+  digitalWrite(led, value);
 }
 
 /********************* Arduino functions **************************/
@@ -50,11 +51,11 @@ void setup() {
     delay(10);
   }
   // Init LED and turn it OFF (if LED_PIN == RGB_BUILTIN, the rgbLedWrite() will be used under the hood)
-  pinMode(LED_PIN, OUTPUT);
-  digitalWrite(LED_PIN, LOW);
+  pinMode(led, OUTPUT);
+  digitalWrite(led, LOW);
 
   // Init button for factory reset
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   //Optional: set Zigbee device name and model
   zbLight.setManufacturerAndModel("Espressif", "ZBLightBulb");
@@ -82,11 +83,11 @@ void setup() {
 
 void loop() {
   // Checking button for factory reset
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
     int startTime = millis();
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot

libraries/Zigbee/examples/Zigbee_On_Off_Switch/Zigbee_On_Off_Switch.ino

@@ -33,10 +33,10 @@
 
 #include "Zigbee.h"
 
+/* Zigbee switch configuration */
 #define SWITCH_ENDPOINT_NUMBER 5
 
-/* Switch configuration */
-#define GPIO_INPUT_IO_TOGGLE_SWITCH 9
+#define GPIO_INPUT_IO_TOGGLE_SWITCH BOOT_PIN
 #define PAIR_SIZE(TYPE_STR_PAIR)    (sizeof(TYPE_STR_PAIR) / sizeof(TYPE_STR_PAIR[0]))
 
 typedef enum {

libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino

@@ -32,12 +32,14 @@
 
 #include "Zigbee.h"
 
-#define BUTTON_PIN                  9  //Boot button for C6/H2
+/* Zigbee temperature + humidity sensor configuration */
 #define TEMP_SENSOR_ENDPOINT_NUMBER 10
 
 #define uS_TO_S_FACTOR 1000000ULL /* Conversion factor for micro seconds to seconds */
 #define TIME_TO_SLEEP  55         /* Sleep for 55s will + 5s delay for establishing connection => data reported every 1 minute */
 
+uint8_t button = BOOT_PIN;
+
 ZigbeeTempSensor zbTempSensor = ZigbeeTempSensor(TEMP_SENSOR_ENDPOINT_NUMBER);
 
 /************************ Temp sensor *****************************/
@@ -70,7 +72,7 @@ void setup() {
     delay(10);
   }
   // Init button switch
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   // Configure the wake up source and set to wake up every 5 seconds
   esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
@@ -118,11 +120,11 @@ void setup() {
 
 void loop() {
   // Checking button for factory reset
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
     int startTime = millis();
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot

libraries/Zigbee/examples/Zigbee_Temperature_Sensor/Zigbee_Temperature_Sensor.ino

@@ -32,8 +32,9 @@
 
 #include "Zigbee.h"
 
-#define BUTTON_PIN                  9  //Boot button for C6/H2
+/* Zigbee temperature sensor configuration */
 #define TEMP_SENSOR_ENDPOINT_NUMBER 10
+uint8_t button = BOOT_PIN;
 
 ZigbeeTempSensor zbTempSensor = ZigbeeTempSensor(TEMP_SENSOR_ENDPOINT_NUMBER);
 
@@ -56,7 +57,7 @@ void setup() {
     delay(10);
   }
   // Init button switch
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   // Optional: set Zigbee device name and model
   zbTempSensor.setManufacturerAndModel("Espressif", "ZigbeeTempSensor");
@@ -99,11 +100,11 @@ void setup() {
 
 void loop() {
   // Checking button for factory reset
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
     int startTime = millis();
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot

libraries/Zigbee/examples/Zigbee_Thermostat/Zigbee_Thermostat.ino

@@ -33,8 +33,9 @@
 
 #include "Zigbee.h"
 
-#define BUTTON_PIN                 9  // Boot button for C6/H2
+/* Zigbee thermostat configuration */
 #define THERMOSTAT_ENDPOINT_NUMBER 5
+uint8_t button = BOOT_PIN;
 
 ZigbeeThermostat zbThermostat = ZigbeeThermostat(THERMOSTAT_ENDPOINT_NUMBER);
 
@@ -64,7 +65,7 @@ void setup() {
   }
 
   // Init button switch
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   // Set callback functions for temperature and configuration receive
   zbThermostat.onTempRecieve(recieveSensorTemp);
@@ -100,10 +101,10 @@ void setup() {
 
 void loop() {
   // Handle button switch in loop()
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
 
     // Key debounce handling
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
     }