[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.45-flippy-73+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #129 SMP PREEMPT Mon Jun 6 15:46:27 CST 2022 [ 0.000000] Machine model: Beelink GT-King [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e4800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x00000000f4806fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] On node 0, zone DMA: 14329 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 19 pages/cpu s37720 r8192 d31912 u77824 [ 0.000000] pcpu-alloc: s37720 r8192 d31912 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 985830 [ 0.000000] Kernel command line: root=UUID=2cd2e2c5-15a4-4709-b405-8b805e02254b rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=5a:16:e8:59:81:be [ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=5a:16:e8:59:81:be", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3600928K/4005916K available (14720K kernel code, 2672K rwdata, 5724K rodata, 1920K init, 883K bss, 142844K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000332] Console: colour dummy device 80x25 [ 0.000745] printk: console [tty0] enabled [ 0.000810] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.000835] pid_max: default: 32768 minimum: 301 [ 0.001040] LSM: Security Framework initializing [ 0.001160] SELinux: Initializing. [ 0.001433] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001467] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004194] rcu: Hierarchical SRCU implementation. [ 0.005843] EFI services will not be available. [ 0.006380] smp: Bringing up secondary CPUs ... [ 0.007241] Detected VIPT I-cache on CPU1 [ 0.007304] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.008623] CPU features: detected: Spectre-v2 [ 0.008634] CPU features: detected: Spectre-v4 [ 0.008637] CPU features: detected: Spectre-BHB [ 0.008642] CPU features: detected: ARM erratum 858921 [ 0.008647] Detected VIPT I-cache on CPU2 [ 0.008674] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.008688] arch_timer: CPU2: Trapping CNTVCT access [ 0.008697] CPU2: Booted secondary processor 0x0000000100 [0x410fd092] [ 0.009460] Detected VIPT I-cache on CPU3 [ 0.009478] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.009485] arch_timer: CPU3: Trapping CNTVCT access [ 0.009492] CPU3: Booted secondary processor 0x0000000101 [0x410fd092] [ 0.010285] Detected VIPT I-cache on CPU4 [ 0.010303] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.010311] arch_timer: CPU4: Trapping CNTVCT access [ 0.010317] CPU4: Booted secondary processor 0x0000000102 [0x410fd092] [ 0.011062] Detected VIPT I-cache on CPU5 [ 0.011081] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.011088] arch_timer: CPU5: Trapping CNTVCT access [ 0.011094] CPU5: Booted secondary processor 0x0000000103 [0x410fd092] [ 0.011171] smp: Brought up 1 node, 6 CPUs [ 0.011367] SMP: Total of 6 processors activated. [ 0.011379] CPU features: detected: 32-bit EL0 Support [ 0.011390] CPU features: detected: 32-bit EL1 Support [ 0.011403] CPU features: detected: CRC32 instructions [ 0.012488] CPU: All CPU(s) started at EL2 [ 0.012534] alternatives: patching kernel code [ 0.014922] devtmpfs: initialized [ 0.024891] Registered cp15_barrier emulation handler [ 0.024924] Registered setend emulation handler [ 0.025072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.025096] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.028703] prandom: seed boundary self test passed [ 0.029882] prandom: 100 self tests passed [ 0.047986] prandom32: self test passed (less than 6 bits correlated) [ 0.048037] pinctrl core: initialized pinctrl subsystem [ 0.048492] DMI not present or invalid. [ 0.048853] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.050513] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.050803] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.051136] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.051230] audit: initializing netlink subsys (disabled) [ 0.051382] audit: type=2000 audit(0.049:1): state=initialized audit_enabled=0 res=1 [ 0.052320] thermal_sys: Registered thermal governor 'step_wise' [ 0.052651] cpuidle: using governor ladder [ 0.052770] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052892] ASID allocator initialised with 65536 entries [ 0.052989] Serial: AMBA PL011 UART driver [ 0.070317] platform ff900000.vpu: Fixing up cyclic dependency with ff600000.hdmi-tx [ 0.080254] platform cvbs-connector: Fixing up cyclic dependency with ff900000.vpu [ 0.080448] platform hdmi-connector: Fixing up cyclic dependency with ff600000.hdmi-tx [ 0.086644] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.086665] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.086677] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.086687] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.651935] cryptd: max_cpu_qlen set to 1000 [ 1.654962] "cryptomgr_test" (106) uses obsolete ecb(arc4) skcipher [ 1.663931] alg: No test for 842 (842-generic) [ 1.664025] alg: No test for 842 (842-scomp) [ 1.751776] DRBG: Continuing without Jitter RNG [ 1.825878] raid6: neonx8 gen() 3101 MB/s [ 1.882630] raid6: neonx8 xor() 2044 MB/s [ 1.939380] raid6: neonx4 gen() 2963 MB/s [ 1.996132] raid6: neonx4 xor() 2266 MB/s [ 2.052886] raid6: neonx2 gen() 2402 MB/s [ 2.109633] raid6: neonx2 xor() 2023 MB/s [ 2.166393] raid6: neonx1 gen() 1816 MB/s [ 2.223143] raid6: neonx1 xor() 1568 MB/s [ 2.279899] raid6: int64x8 gen() 1356 MB/s [ 2.336654] raid6: int64x8 xor() 781 MB/s [ 2.393388] raid6: int64x4 gen() 1460 MB/s [ 2.450123] raid6: int64x4 xor() 807 MB/s [ 2.506871] raid6: int64x2 gen() 1312 MB/s [ 2.563611] raid6: int64x2 xor() 733 MB/s [ 2.620372] raid6: int64x1 gen() 1093 MB/s [ 2.677102] raid6: int64x1 xor() 617 MB/s [ 2.677110] raid6: using algorithm neonx8 gen() 3101 MB/s [ 2.677119] raid6: .... xor() 2044 MB/s, rmw enabled [ 2.677127] raid6: using neon recovery algorithm [ 2.677233] fbcon: Taking over console [ 2.678295] VDDAO_3V3: supplied by 12V [ 2.678605] iommu: Default domain type: Translated [ 2.678616] iommu: DMA domain TLB invalidation policy: strict mode [ 2.678902] vgaarb: loaded [ 2.679231] SCSI subsystem initialized [ 2.679389] usbcore: registered new interface driver usbfs [ 2.679431] usbcore: registered new interface driver hub [ 2.679463] usbcore: registered new device driver usb [ 2.679753] mc: Linux media interface: v0.10 [ 2.679776] videodev: Linux video capture interface: v2.00 [ 2.679972] EDAC MC: Ver: 3.0.0 [ 2.680677] Advanced Linux Sound Architecture Driver Initialized. [ 2.681424] clocksource: Switched to clocksource arch_sys_counter [ 2.681635] VFS: Disk quotas dquot_6.6.0 [ 2.681689] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.681793] FS-Cache: Loaded [ 2.687025] NET: Registered PF_INET protocol family [ 2.687224] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.689265] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.689338] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 2.689505] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 2.689701] TCP: Hash tables configured (established 32768 bind 32768) [ 2.689896] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 2.689975] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.690020] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.690187] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.690216] NET: Registered PF_XDP protocol family [ 2.690232] PCI: CLS 0 bytes, default 64 [ 2.690489] Trying to unpack rootfs image as initramfs... [ 2.698734] kvm [1]: IPA Size Limit: 40 bits [ 2.699420] kvm [1]: vgic interrupt IRQ9 [ 2.699574] kvm [1]: Hyp mode initialized successfully [ 3.105934] Freeing initrd memory: 10316K [ 3.245697] Initialise system trusted keyrings [ 3.245851] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 3.250587] zbud: loaded [ 3.252137] fuse: init (API version 7.34) [ 3.252489] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 3.282221] NET: Registered PF_ALG protocol family [ 3.317946] xor: measuring software checksum speed [ 3.320642] 8regs : 3673 MB/sec [ 3.322884] 32regs : 4593 MB/sec [ 3.326015] arm64_neon : 3158 MB/sec [ 3.326024] xor: using function: 32regs (4593 MB/sec) [ 3.326036] Key type asymmetric registered [ 3.326044] Asymmetric key parser 'x509' registered [ 3.326111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 3.326205] io scheduler mq-deadline registered [ 3.326215] io scheduler kyber registered [ 3.326313] io scheduler bfq registered [ 3.348207] soc soc0: Amlogic Meson G12B (S922X) Revision 29:b (40:2) Detected [ 3.349319] VDDCPU_A: supplied by 12V [ 3.349597] VDDCPU_B: supplied by 12V [ 3.350666] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.351941] Serial: AMBA driver [ 3.352232] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart [ 4.433339] printk: console [ttyAML0] enabled [ 4.438048] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 28, base_baud = 1500000) is a meson_uart [ 4.447062] serial serial0: tty port ttyAML6 registered [ 4.459104] brd: module loaded [ 4.462074] loop: module loaded [ 4.467418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.468332] ehci-pci: EHCI PCI platform driver [ 4.472758] ehci-platform: EHCI generic platform driver [ 4.478294] usbcore: registered new interface driver cdc_wdm [ 4.483534] usbcore: registered new interface driver usb-storage [ 4.489788] mousedev: PS/2 mouse device common for all mice [ 4.495658] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi [ 4.501943] meson-vrtc ff8000a8.rtc: registered as rtc1 [ 4.506938] i2c_dev: i2c /dev entries driver [ 4.512936] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present! [ 4.518658] Registered IR keymap rc-cec [ 4.522290] rc rc0: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0 [ 4.530956] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0/input0 [ 4.545666] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz [ 4.552234] Synopsys Designware Multimedia Card Interface Driver [ 4.557189] meson-gx-mmc ffe05000.sd: Got CD GPIO [ 4.557636] meson-sm: secure-monitor enabled [ 4.566301] hid: raw HID events driver (C) Jiri Kosina [ 4.570682] usbcore: registered new interface driver usbhid [ 4.576145] usbhid: USB HID core driver [ 4.582143] Initializing XFRM netlink socket [ 4.584398] NET: Registered PF_INET6 protocol family [ 4.590713] gpio irq setup: hwirq: 0x3B irqfirst: 0x35 irqlast: 0x3C pin[47] [ 4.596179] genirq: Setting trigger mode 3 for irq 36 failed (meson_gpio_irq_set_type+0x0/0x140) [ 4.602858] Segment Routing with IPv6 [ 4.608453] RPL Segment Routing with IPv6 [ 4.612404] In-situ OAM (IOAM) with IPv6 [ 4.616336] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.623496] bpfilter: Loaded bpfilter_umh pid 314 [ 4.626805] NET: Registered PF_PACKET protocol family [ 4.631814] NET: Registered PF_KEY protocol family [ 4.636578] 8021q: 802.1Q VLAN Support v1.8 [ 4.640847] registered taskstats version 1 [ 4.644720] Loading compiled-in X.509 certificates [ 4.651232] zswap: loaded using pool zstd/zbud [ 4.654158] Key type ._fscrypt registered [ 4.657831] Key type .fscrypt registered [ 4.661705] Key type fscrypt-provisioning registered [ 4.667012] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 4.687003] VCC_5V: supplied by 12V [ 4.687153] VCC_3V3: supplied by VDDAO_3V3 [ 4.689150] USB1_POW: supplied by VCC_5V [ 4.692960] USB_PWR_EN: supplied by VCC_5V [ 4.696950] VDDAO_1V8: supplied by VDDAO_3V3 [ 4.701211] mali: supplied by VCC_5V [ 4.758167] meson-drm ff900000.vpu: Queued 3 outputs on vpu [ 4.788775] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 4.793171] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 4.801039] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops) [ 4.808525] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0 [ 4.869115] [drm] kms: can't enable cloning when we probably wanted to. [ 5.043479] Console: switching to colour frame buffer device 240x67 [ 5.076014] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 5.085455] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found [ 5.089654] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found [ 5.095922] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock [ 5.102422] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 5.108828] meson8b-dwmac ff3f0000.ethernet: DWMAC1000 [ 5.113974] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported [ 5.121386] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported [ 5.128807] meson8b-dwmac ff3f0000.ethernet: COE Type 2 [ 5.133976] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported [ 5.140966] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported [ 5.147344] meson8b-dwmac ff3f0000.ethernet: Normal descriptors [ 5.153212] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled [ 5.158988] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 5.168269] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2 [ 5.172100] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1 [ 5.180103] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator [ 5.184407] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator [ 5.191544] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 5.199079] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.204618] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 5.211541] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010 [ 5.220764] xhci-hcd xhci-hcd.3.auto: irq 38, io mem 0xff500000 [ 5.226774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 5.234803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.241960] usb usb1: Product: xHCI Host Controller [ 5.246791] usb usb1: Manufacturer: Linux 5.15.45-flippy-73+o xhci-hcd [ 5.253258] usb usb1: SerialNumber: xhci-hcd.3.auto [ 5.258285] hub 1-0:1.0: USB hub found [ 5.261813] hub 1-0:1.0: 2 ports detected [ 5.265914] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.271256] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2 [ 5.278794] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed [ 5.285291] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.293354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 5.301474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.308633] usb usb2: Product: xHCI Host Controller [ 5.313461] usb usb2: Manufacturer: Linux 5.15.45-flippy-73+o xhci-hcd [ 5.319930] usb usb2: SerialNumber: xhci-hcd.3.auto [ 5.324910] hub 2-0:1.0: USB hub found [ 5.328486] hub 2-0:1.0: 1 port detected [ 5.333244] FLASH_1V8: supplied by VCC_3V3 [ 5.333539] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq [ 5.336613] VCC_1V8: supplied by VCC_3V3 [ 5.345882] simple-framebuffer f4807000.framebuffer: simplefb: a framebuffer is already registered [ 5.354615] simple-framebuffer: probe of f4807000.framebuffer failed with error -22 [ 5.528093] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.573120] ALSA device list: [ 5.573148] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq [ 5.575902] No soundcards found. [ 5.608348] Freeing unused kernel memory: 1920K [ 5.621478] Run /init as init process [ 5.625209] with arguments: [ 5.625214] /init [ 5.625218] with environment: [ 5.625221] HOME=/ [ 5.625225] TERM=linux [ 5.625228] cgroup_enable=memory [ 5.625232] cgroup_memory=1 [ 5.625236] mac=5a:16:e8:59:81:be [ 5.678650] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5011, bcdDevice= 1.00 [ 5.683373] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.690478] usb 1-1: Product: USB2.0 Hub [ 5.694322] usb 1-1: Manufacturer: Fresco Logic, Inc. [ 5.733497] hub 1-1:1.0: USB hub found [ 5.734610] mmc2: new HS200 MMC card at address 0001 [ 5.735750] hub 1-1:1.0: 5 ports detected [ 5.740291] mmcblk2: mmc2:0001 064G02 58.2 GiB [ 5.748600] mmcblk2: p1 p2 [ 5.750917] mmcblk2boot0: mmc2:0001 064G02 8.00 MiB [ 5.755943] mmcblk2boot1: mmc2:0001 064G02 8.00 MiB [ 5.760531] mmcblk2rpmb: mmc2:0001 064G02 4.00 MiB, chardev (240:0) [ 5.804826] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 5.825347] usb 2-1: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [ 5.829933] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.837023] usb 2-1: Product: USB3.0 Hub [ 5.840869] usb 2-1: Manufacturer: Fresco Logic, Inc. [ 5.852455] rtc-pcf8563 0-0051: registered as rtc0 [ 5.855709] rtc-pcf8563 0-0051: setting system clock to 2022-06-09T10:33:01 UTC (1654770781) [ 5.877469] hub 2-1:1.0: USB hub found [ 5.879482] hub 2-1:1.0: 4 ports detected [ 5.954768] usb 1-2: new high-speed USB device number 3 using xhci-hcd [ 6.108373] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 6.114346] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.121417] usb 1-2: Product: USB 2.0 Hub [MTT] [ 6.181444] hub 1-2:1.0: USB hub found [ 6.184968] hub 1-2:1.0: 4 ports detected [ 6.348115] usb 1-1.3: new full-speed USB device number 4 using xhci-hcd [ 6.416183] EXT4-fs (mmcblk2p2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none. [ 6.450471] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00 [ 6.450482] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.450485] usb 1-1.3: Product: USB Receiver [ 6.450488] usb 1-1.3: Manufacturer: Logitech [ 6.535491] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52F.0001/input/input1 [ 6.548755] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.3.auto-1.3/input0 [ 6.562413] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52F.0002/input/input2 [ 6.635108] hid-generic 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-1.3/input1 [ 6.646181] usb 1-2.3: new low-speed USB device number 5 using xhci-hcd [ 6.698753] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 6.724902] systemd[1]: Detected architecture arm64. [ 6.747675] systemd[1]: Set hostname to . [ 6.853844] usb 1-2.3: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10 [ 6.860782] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.867287] usb 1-2.3: Product: USB Keyboard [ 6.871503] usb 1-2.3: Manufacturer: SIGMACHIP [ 6.952285] input: SIGMACHIP USB Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.0/0003:1C4F:0026.0003/input/input5 [ 7.025106] hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.3.auto-2.3/input0 [ 7.038854] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:1C4F:0026.0004/input/input6 [ 7.087966] systemd[1]: Queued start job for default target Graphical Interface. [ 7.094256] random: systemd: uninitialized urandom read (16 bytes read) [ 7.101223] systemd[1]: Created slice system-getty.slice. [ 7.108403] random: systemd: uninitialized urandom read (16 bytes read) [ 7.111580] input: SIGMACHIP USB Keyboard System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:1C4F:0026.0004/input/input7 [ 7.112932] systemd[1]: Created slice system-modprobe.slice. [ 7.128517] hid-generic 0003:1C4F:0026.0004: input,hidraw3: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.3.auto-2.3/input1 [ 7.149614] random: systemd: uninitialized urandom read (16 bytes read) [ 7.154391] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.163466] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.170483] systemd[1]: Created slice User and Session Slice. [ 7.176585] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 7.187212] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.198032] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.208087] systemd[1]: Reached target Local Encrypted Volumes. [ 7.214720] systemd[1]: Reached target User and Group Name Lookups. [ 7.221643] systemd[1]: Reached target Paths. [ 7.228006] systemd[1]: Reached target Slices. [ 7.234378] systemd[1]: Reached target Swap. [ 7.240721] systemd[1]: Reached target System Time Set. [ 7.253382] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.261073] systemd[1]: Listening on Syslog Socket. [ 7.267604] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.275060] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.282459] systemd[1]: Listening on Journal Audit Socket. [ 7.288926] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.295694] systemd[1]: Listening on Journal Socket. [ 7.302248] systemd[1]: Listening on udev Control Socket. [ 7.308455] systemd[1]: Listening on udev Kernel Socket. [ 7.315973] systemd[1]: Mounting Huge Pages File System... [ 7.323747] systemd[1]: Mounting POSIX Message Queue File System... [ 7.331923] systemd[1]: Mounting NFSD configuration filesystem... [ 7.339923] systemd[1]: Mounting RPC Pipe File System... [ 7.345263] RPC: Registered named UNIX socket transport module. [ 7.345270] RPC: Registered udp transport module. [ 7.345271] RPC: Registered tcp transport module. [ 7.345272] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.365488] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.366842] systemd[1]: Mounting Kernel Debug File System... [ 7.379494] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 7.385042] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 7.397012] systemd[1]: Starting Restore / save the current clock... [ 7.405331] systemd[1]: Starting Set the console keyboard layout... [ 7.413229] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.423586] systemd[1]: Starting Load Kernel Module configfs... [ 7.431079] systemd[1]: Starting Load Kernel Module drm... [ 7.438102] systemd[1]: Starting Load Kernel Module fuse... [ 7.445007] systemd[1]: Started Nameserver information manager. [ 7.450407] systemd[1]: Reached target Network (Pre). [ 7.456156] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.461945] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.473558] systemd[1]: Starting Load Kernel Modules... [ 7.480338] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.488583] systemd[1]: Starting Coldplug All udev Devices... [ 7.496892] systemd[1]: Mounted Huge Pages File System. [ 7.501890] systemd[1]: Mounted POSIX Message Queue File System. [ 7.506124] EXT4-fs (mmcblk2p2): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 7.514384] systemd[1]: Mounted NFSD configuration filesystem. [ 7.521103] systemd[1]: Mounted RPC Pipe File System. [ 7.526033] systemd[1]: Mounted Kernel Debug File System. [ 7.532040] systemd[1]: Finished Restore / save the current clock. [ 7.538253] systemd[1]: Finished Set the console keyboard layout. [ 7.544195] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.552577] systemd[1]: modprobe@configfs.service: Succeeded. [ 7.555480] systemd[1]: Finished Load Kernel Module configfs. [ 7.563937] systemd[1]: modprobe@drm.service: Succeeded. [ 7.566675] systemd[1]: Finished Load Kernel Module drm. [ 7.573975] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.577211] systemd[1]: Finished Load Kernel Module fuse. [ 7.585564] systemd[1]: Finished Load Kernel Modules. [ 7.590731] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.599970] systemd[1]: Mounting FUSE Control File System... [ 7.606590] systemd[1]: Mounting Kernel Configuration File System... [ 7.613967] systemd[1]: Starting pNFS block layout mapping daemon... [ 7.623572] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.628967] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.639942] systemd[1]: Starting Load/Save Random Seed... [ 7.647989] systemd[1]: Starting Apply Kernel Variables... [ 7.654958] systemd[1]: Starting Create System Users... [ 7.661739] systemd[1]: Mounted FUSE Control File System. [ 7.666997] systemd[1]: Mounted Kernel Configuration File System. [ 7.672915] systemd[1]: Started pNFS block layout mapping daemon. [ 7.679504] systemd[1]: Finished Create System Users. [ 7.686505] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.695439] systemd[1]: Finished Apply Kernel Variables. [ 7.702039] systemd[1]: Finished Coldplug All udev Devices. [ 7.709199] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.716785] systemd[1]: Finished Create Static Device Nodes in /dev. [ 7.722711] systemd[1]: Reached target Local File Systems (Pre). [ 7.729677] systemd[1]: var-tmp.mount: Directory /var/tmp to mount over is not empty, mounting anyway. [ 7.737262] systemd[1]: Mounting /var/tmp... [ 7.745245] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 7.753821] systemd[1]: Mounted /var/tmp. [ 7.823264] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 8.056558] Registered IR keymap rc-empty [ 8.072512] rc rc1: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1 [ 8.112100] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.114743] urandom_read_iter: 59 callbacks suppressed [ 8.114769] random: systemd: uninitialized urandom read (16 bytes read) [ 8.129899] random: systemd: uninitialized urandom read (16 bytes read) [ 8.167225] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1/input8 [ 8.177002] meson-ir ff808000.ir: receiver initialized [ 8.185640] random: systemd: uninitialized urandom read (16 bytes read) [ 8.189001] systemd[1]: Found device /dev/ttyAML0. [ 8.208536] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.239721] panfrost ffe40000.gpu: clock rate = 24000000 [ 8.255576] panfrost ffe40000.gpu: mali-g52 id 0x7212 major 0x0 minor 0x0 status 0x0 [ 8.262389] panfrost ffe40000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400 [ 8.270508] panfrost ffe40000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 8.282158] panfrost ffe40000.gpu: shader_present=0x3 l2_present=0x1 [ 8.300985] systemd[1]: Reached target Hardware activated USB gadget. [ 8.310523] debugfs: File 'Capture' in directory 'dapm' already present! [ 8.317706] [drm] Initialized panfrost 1.2.0 20180908 for ffe40000.gpu on minor 1 [ 8.339157] Bluetooth: Core ver 2.22 [ 8.355654] Bluetooth: Starting self testing [ 8.366448] Bluetooth: ECDH test passed in 5940 usecs [ 8.370909] Bluetooth: SMP test passed in 1832 usecs [ 8.374003] Bluetooth: Finished self testing [ 8.377580] NET: Registered PF_BLUETOOTH protocol family [ 8.382811] Bluetooth: HCI device and connection manager initialized [ 8.389051] Bluetooth: HCI socket layer initialized [ 8.393841] Bluetooth: L2CAP socket layer initialized [ 8.398853] Bluetooth: SCO socket layer initialized [ 8.421600] systemd[1]: Found device /dev/disk/by-label/BOOT_EMMC. [ 8.463546] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT_EMMC... [ 8.510701] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 8.522347] systemd[1]: Started File System Check Daemon to report status. [ 8.533898] Bluetooth: HCI UART driver ver 2.3 [ 8.533911] Bluetooth: HCI UART protocol H4 registered [ 8.533913] Bluetooth: HCI UART protocol BCSP registered [ 8.533966] Bluetooth: HCI UART protocol LL registered [ 8.533968] Bluetooth: HCI UART protocol ATH3K registered [ 8.533984] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.534137] Bluetooth: HCI UART protocol Intel registered [ 8.534241] Bluetooth: HCI UART protocol Broadcom registered [ 8.534243] Driver 'hci_uart_qca' needs updating - please use bus_type methods [ 8.534259] Bluetooth: HCI UART protocol QCA registered [ 8.534261] Bluetooth: HCI UART protocol AG6XX registered [ 8.534274] Bluetooth: HCI UART protocol Marvell registered [ 8.534433] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 8.534622] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 8.538582] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.3.auto-1.3/input0 [ 8.650765] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT_EMMC. [ 8.662177] logitech-djreceiver 0003:046D:C52F.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-1.3/input1 [ 8.723576] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1 [ 8.724982] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 8.737123] input: Logitech Wireless Mouse PID:4080 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52F.0002/0003:046D:4080.0005/input/input9 [ 8.769833] input: Logitech Wireless Mouse PID:4080 Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52F.0002/0003:046D:4080.0005/input/input10 [ 8.771328] systemd[1]: Mounting /boot... [ 8.795191] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 8.798584] hid-generic 0003:046D:4080.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4080] on usb-xhci-hcd.3.auto-1.3/input1:1 [ 8.800798] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.824286] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.833365] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.841580] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.853073] systemd[1]: Mounted /boot. [ 8.865209] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 8.875593] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 8.883788] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.892655] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.901635] systemd[1]: Reached target Local File Systems. [ 8.902316] Bluetooth: hci0: BCM: chip id 159 [ 8.912482] Bluetooth: hci0: BCM: features 0x0f [ 8.914079] Bluetooth: hci0: BCM4362A2 [ 8.919471] Bluetooth: hci0: BCM4362A2 (000.017.017) build 0000 [ 8.927211] systemd[1]: Starting Armbian leds state... [ 8.929025] Bluetooth: hci0: BCM4362A2 'brcm/BCM4362A2.hcd' Patch [ 8.940982] systemd[1]: Starting Armbian ZRAM config... [ 8.948195] systemd[1]: Starting Set console font and keymap... [ 8.957556] systemd[1]: Starting Preprocess NFS configuration... [ 8.963657] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.969215] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.980458] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 8.989017] systemd[1]: Finished Armbian leds state. [ 8.994977] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.996206] input: Logitech M350 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52F.0002/0003:046D:4080.0005/input/input14 [ 9.017682] logitech-hidpp-device 0003:046D:4080.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech M350] on usb-xhci-hcd.3.auto-1.3/input1:1 [ 9.030617] systemd[1]: Finished Set console font and keymap. [ 9.038853] systemd[1]: nfs-config.service: Succeeded. [ 9.042361] systemd[1]: Finished Preprocess NFS configuration. [ 9.052279] systemd[1]: Starting NFSv4 ID-name mapping service... [ 9.058819] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. [ 9.066619] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. [ 9.066800] zram: Added device: zram0 [ 9.075620] systemd[1]: Reached target NFS client services. [ 9.084698] zram: Added device: zram1 [ 9.088648] zram: Added device: zram2 [ 9.096710] systemd[1]: Started NFSv4 ID-name mapping service. [ 9.124143] random: crng init done [ 9.128943] zram0: detected capacity change from 0 to 3875312 [ 9.130233] random: 64 urandom warning(s) missed due to ratelimiting [ 9.145455] systemd[1]: Finished Load/Save Random Seed. [ 9.152147] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 9.153683] Adding 1937652k swap on /dev/zram0. Priority:5 extents:1 across:1937652k SSFS [ 9.157334] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.175129] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.186981] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 9.196313] systemd[1]: Starting Raise network interfaces... [ 9.236493] zram1: detected capacity change from 0 to 102400 [ 9.274408] zram2: detected capacity change from 0 to 3875312 [ 9.332530] EXT4-fs (zram2): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.355374] systemd[1]: Finished Armbian ZRAM config. [ 9.362746] systemd[1]: Starting Armbian memory supported logging... [ 9.393745] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.399466] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 9.568132] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=39) [ 9.578575] meson8b-dwmac ff3f0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 9.594772] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found [ 9.600604] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW [ 9.607717] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode [ 10.090214] Bluetooth: hci0: BCM43752A2 UART 37.4MHz Ampak AP6275P sLNA iLNA [Version: 0036.0052] [ 10.095911] Bluetooth: hci0: BCM4362A2 (000.017.017) build 0052 [ 11.238485] systemd[1]: Finished Armbian memory supported logging. [ 11.246677] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 11.254426] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.264437] systemd[1]: Starting Journal Service... [ 11.372530] systemd[1]: Started Journal Service. [ 11.391783] systemd-journald[820]: Received client request to flush runtime journal. [ 11.397765] systemd-journald[820]: File /var/log/journal/53102fe0cc314368a3ce804c3e39de45/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 14.662225] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.664172] Bluetooth: BNEP filters: protocol multicast [ 14.669039] Bluetooth: BNEP socket layer initialized [ 15.048868] [drm] kms: can't enable cloning when we probably wanted to. [ 15.977801] NFSD: Using UMH upcall client tracking operations. [ 15.980329] NFSD: starting 90-second grace period (net f0000000) [ 17.537929] Bluetooth: RFCOMM TTY layer initialized [ 17.537974] Bluetooth: RFCOMM socket layer initialized [ 17.542356] Bluetooth: RFCOMM ver 1.11 [ 21.731871] rfkill: input handler disabled [ 22.261014] systemd-journald[820]: File /var/log/journal/53102fe0cc314368a3ce804c3e39de45/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 184.227659] rfkill: input handler enabled [ 185.897594] logitech-hidpp-device 0003:046D:4080.0005: HID++ 4.5 device connected. [ 187.964710] rfkill: input handler disabled