net/mlx5: Handle pairing of E-switch via uplink un/load APIs

In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.

The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.

[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.

[  157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[  157.964662 ] #PF: supervisor read access in kernel mode
[  157.965123 ] #PF: error_code(0x0000) - not-present page
[  157.965582 ] PGD 0 P4D 0
[  157.965866 ] Oops: 0000 [#1] SMP
[  157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[  157.976164 ] Call Trace:
[  157.976437 ]  <TASK>
[  157.976690 ]  __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[  157.977230 ]  mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[  157.977767 ]  mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[  157.984653 ]  mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[  157.985212 ]  mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[  157.985714 ]  esw_offloads_disable+0x5a/0x110 [mlx5_core]
[  157.986209 ]  mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[  157.986757 ]  mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[  157.987248 ]  mlx5_unload+0x2a/0xb0 [mlx5_core]
[  157.987678 ]  mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[  157.988127 ]  remove_one+0x64/0xe0 [mlx5_core]
[  157.988549 ]  pci_device_remove+0x31/0xa0
[  157.988933 ]  device_release_driver_internal+0x18f/0x1f0
[  157.989402 ]  driver_detach+0x3f/0x80
[  157.989754 ]  bus_remove_driver+0x70/0xf0
[  157.990129 ]  pci_unregister_driver+0x34/0x90
[  157.990537 ]  mlx5_cleanup+0xc/0x1c [mlx5_core]
[  157.990972 ]  __x64_sys_delete_module+0x15a/0x250
[  157.991398 ]  ? exit_to_user_mode_prepare+0xea/0x110
[  157.991840 ]  do_syscall_64+0x3d/0x90
[  157.992198 ]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 04de7dd ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>

Author: shayshyi

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -5301,6 +5301,8 @@ int mlx5e_tc_esw_init(struct mlx5_rep_uplink_priv *uplink_priv)
 		goto err_action_counter;
 	}
 
+	mlx5_esw_offloads_devcom_init(esw);
+
 	return 0;
 
 err_action_counter:
@@ -5329,7 +5331,7 @@ void mlx5e_tc_esw_cleanup(struct mlx5_rep_uplink_priv *uplink_priv)
 	priv = netdev_priv(rpriv->netdev);
 	esw = priv->mdev->priv.eswitch;
 
-	mlx5e_tc_clean_fdb_peer_flows(esw);
+	mlx5_esw_offloads_devcom_cleanup(esw);
 
 	mlx5e_tc_tun_cleanup(uplink_priv->encap);
 

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -369,6 +369,8 @@ int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs);
 void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw, bool clear_vf);
 void mlx5_eswitch_disable_locked(struct mlx5_eswitch *esw);
 void mlx5_eswitch_disable(struct mlx5_eswitch *esw);
+void mlx5_esw_offloads_devcom_init(struct mlx5_eswitch *esw);
+void mlx5_esw_offloads_devcom_cleanup(struct mlx5_eswitch *esw);
 int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw,
 			       u16 vport, const u8 *mac);
 int mlx5_eswitch_set_vport_state(struct mlx5_eswitch *esw,
@@ -767,6 +769,8 @@ static inline void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw) {}
 static inline int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs) { return 0; }
 static inline void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw, bool clear_vf) {}
 static inline void mlx5_eswitch_disable(struct mlx5_eswitch *esw) {}
+static inline void mlx5_esw_offloads_devcom_init(struct mlx5_eswitch *esw) {}
+static inline void mlx5_esw_offloads_devcom_cleanup(struct mlx5_eswitch *esw) {}
 static inline bool mlx5_eswitch_is_funcs_handler(struct mlx5_core_dev *dev) { return false; }
 static inline
 int mlx5_eswitch_set_vport_state(struct mlx5_eswitch *esw, u16 vport, int link_state) { return 0; }

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c

@@ -2779,7 +2779,7 @@ static int mlx5_esw_offloads_devcom_event(int event,
 	return err;
 }
 
-static void esw_offloads_devcom_init(struct mlx5_eswitch *esw)
+void mlx5_esw_offloads_devcom_init(struct mlx5_eswitch *esw)
 {
 	struct mlx5_devcom *devcom = esw->dev->priv.devcom;
 
@@ -2802,7 +2802,7 @@ static void esw_offloads_devcom_init(struct mlx5_eswitch *esw)
 			       ESW_OFFLOADS_DEVCOM_PAIR, esw);
 }
 
-static void esw_offloads_devcom_cleanup(struct mlx5_eswitch *esw)
+void mlx5_esw_offloads_devcom_cleanup(struct mlx5_eswitch *esw)
 {
 	struct mlx5_devcom *devcom = esw->dev->priv.devcom;
 
@@ -3250,8 +3250,6 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	if (err)
 		goto err_vports;
 
-	esw_offloads_devcom_init(esw);
-
 	return 0;
 
 err_vports:
@@ -3292,7 +3290,6 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw,
 
 void esw_offloads_disable(struct mlx5_eswitch *esw)
 {
-	esw_offloads_devcom_cleanup(esw);
 	mlx5_eswitch_disable_pf_vf_vports(esw);
 	esw_offloads_unload_rep(esw, MLX5_VPORT_UPLINK);
 	esw_set_passing_vport_metadata(esw, false);