Skip to content

README.md

Latest commit

 

History

History
243 lines (171 loc) · 8.58 KB

README.md

File metadata and controls

243 lines (171 loc) · 8.58 KB
Raw

🚧 WARNING 🚧 Work In Progress

You're looking at the source for solidus_stripe v5, which will only support the starter frontend but at the moment it is not ready to be used.

Please use solidus_stripe v4 on the corresponding branch.

🚧 WARNING 🚧 Supporting solidus_frontend

If you need support for solidus_frontend please add < 5 as a version requirement in your gemfile: gem 'solidus_stripe', '< 5' or if your tracking the github version please switch to the v4 branch: gem 'solidus_stripe', git: 'https://github.com/solidusio/solidus_stripe.git', branch: 'v4'

Solidus Stripe

CircleCI codecov

Installation

Add solidus_stripe to your Gemfile:

gem 'solidus_stripe'

Bundle your dependencies and run the installation generator:

bin/rails generate solidus_stripe:install

Webhooks

This library makes use of some Stripe webhooks.

Every Solidus Stripe payment method you create will get a slug assigned. You need to append it to a generic webhook endpoint to get the URL for that payment method. For example:

SolidusStripe::PaymentMethod.last.slug
# "365a8435cd11300e87de864c149516e0"

For the above example, and if you mounted the SolidusStripe::Engine routes on the default scope, the webhook endpoint would look like:

/solidus_stripe/webhooks/365a8435cd11300e87de864c149516e0

Besides, you also need to configure the webhook signing secret for that payment method. You can do that through the webhook_endpoint_signing_secret preference on the payment method.

Before going to production, you'll need to register the webhook endpoint with Stripe, and make sure to subscribe to the events listed in the SolidusStripe::Webhook::Event::CORE constant.

On development, you can test webhooks by using Stripe CLI.

Usage

Showing reusable sources in the checkout

When saving stripe payment methods for future usage the checkout requires a partial for each supported payment method type.

For the full list of types see: https://stripe.com/docs/api/payment_methods/object#payment_method_object-type.

The extension will only install a partial for the card type, located in app/views/checkouts/existing_payment/stripe/_card.html.erb, and fall back to a default partial otherwise (see app/views/checkouts/existing_payment/stripe/_default.html.erb).

As an example, in order to show a wallet source connected to a SEPA Debit payment method the following partial should be added:

app/views/checkouts/existing_payment/stripe/_sepa_debit.html.erb

<% sepa_debit = stripe_payment_method.sepa_debit %>
🏦 <%= sepa_debit.bank_code %> / <%= sepa_debit.branch_code %><br>
IBAN: **** **** **** **** **** <%= sepa_debit.last4 %>

Custom webhooks

You can also use Stripe webhooks to trigger custom actions in your application.

First, you need to register the event you want to listen to, both in Stripe and in your application:

# config/initializers/solidus_stripe.rb
SolidusStripe.configure do |config|
  config.webhook_events = %i[charge.succeeded]
end

That will register a new :"stripe.charge.succeeded" event in the Solidus bus. The Solidus event will be published whenever a matching incoming webhook event is received. You can subscribe to it as regular:

# app/subscribers/update_account_balance_subscriber.rb
class UpdateAccountBalanceSubscriber
  include Omnes::Subscriber

  handle :"stripe.charge.succeeded", with: :call

  def call(event)
    # ...
  end
end

# config/initializers/solidus_stripe.rb
# ...
Rails.application.config.to_prepare do
  UpdateAccountBalanceSubscriber.new.subscribe_to(Spree::Bus)
end

The passed event object is a thin wrapper around the Stripe event and the associated Solidus Stripe payment method. It will delegate all unknown methods to the underlying stripe event object. It can also be used in async adapters, which is recommended as otherwise the response to Stripe will be delayed until subscribers are done.

You can also configure the signature verification tolerance in seconds (it defaults to the same value as Stripe default):

# config/initializers/solidus_stripe.rb
SolidusStripe.configure do |config|
  config.webhook_signature_tolerance = 150
end

Implementation

Payment state-machine vs. PaymentIntent statuses

When compared to the Payment state machine, Stripe payment intents have different set of states and transitions. The most important difference is that on Stripe a failure is not a final state, rather just a way to start over.

In order to map these concepts SolidusStripe will match states in a slightly unexpected way, as shown below.

Stripe PaymentIntent Status Solidus Payment State
requires_payment_method checkout
requires_action checkout
processing checkout
requires_confirmation checkout
requires_capture pending
succeeded completed

Reference:

Development

Retrieve your API Key and Publishable Key from your Stripe testing dashboard. You can get your webhook signing secret executing the stripe listen command.

Set SOLIDUS_STRIPE_API_KEY, SOLIDUS_STRIPE_PUBLISHABLE_KEY and SOLIDUS_STRIPE_WEBHOOK_SIGNING_SECRET environment variables (e.g. via direnv), this will trigger the default initializer to create a static preference for SolidusStripe.

Run bin/dev to start both the sandbox rail server and the file watcher through Foreman. That will update the sandbox whenever a file is changed. When using bin/dev you can safely add debugger statements, even if Foreman won't provide a TTY, by connecting to the debugger session through rdbg --attach from another terminal.

Visit /admin/payments and create a new Stripe payment using the static preferences.

See the Webhooks section to learn how to configure Stripe webhooks.

Testing the extension

First bundle your dependencies, then run bin/rake. bin/rake will default to building the dummy app if it does not exist, then it will run specs. The dummy app can be regenerated by using bin/rake extension:test_app.

bin/rake

To run Rubocop static code analysis run

bundle exec rubocop

When testing your application's integration with this extension you may use its factories. Simply add this require statement to your spec/spec_helper.rb:

require 'solidus_stripe/testing_support/factories'

Or, if you are using FactoryBot.definition_file_paths, you can load Solidus core factories along with this extension's factories using this statement:

SolidusDevSupport::TestingSupport::Factories.load_for(SolidusStripe::Engine)

Running the sandbox

To run this extension in a sandboxed Solidus application, you can run bin/sandbox. The path for the sandbox app is ./sandbox and bin/rails will forward any Rails commands to sandbox/bin/rails.

Here's an example:

$ bin/rails server
=> Booting Puma
=> Rails 6.0.2.1 application starting in development
* Listening on tcp://127.0.0.1:3000
Use Ctrl-C to stop

Releasing new versions

Please refer to the dedicated page on Solidus wiki.

License

Copyright (c) 2014 Spree Commerce Inc., released under the New BSD License Copyright (c) 2021 Solidus Team, released under the New BSD License.