[New Variant] request list

@kbumsik

Hereafter the list of all new variants requested and their linked issue.
Feel free to file an new issue then it will be added to this list.

Note

This is a community projects.
Any contribution is welcome, so feel free submit a PR. 😉

Important

To add a STM32 based board follows this wiki

Board support requested:

Discovery

Nucleo

Generic / Custom

3D printer:

BIGTREETECH BTT SKR PRO V1.2 ([New Variant] STM32F407ZGT6 - BIGTREETECH BTT SKR PRO V1.2 #1284)

LoRa:

Heltec LoRa Node L151 ([New Variant][on way] Heltec LoRa Node L151 #983) initial support at https://github.com/fthiebolt/LoRa-boards-stm32duino
RAK811 Wis DUO (STM32L(RAK811 chip) RAK811 Wis DUO #1395)
RAK3172: (RAK3172 "WLE5CCU6" STM32LoRaWAN#7)
- RAK3172-Evaluation-Board
  - RAK3172-SiP
STM32F103C8T6 with DX- LR30 or DX-LR20 ([New Variant] STM32F103C8T6 with DX-LR30 or DX-LR20 #2777)

Done

Sorry for the noob questions, but I'm slowly starting to getting into things.

The Nucleo board I currently have uses the internal HFI (high-frequency internal oscillator) instead of an external crystal. To gain more accurate timing I soldered in an 8 MHz crystal, some caps and added a few 0R resistors. With a little fiddling, I was able to reconfigure the clock, and I'm now running with an external crystal!

However, one question still remains; Why would I need a 32.768 kHz crystal as well? The Nucleo board has this crystal populated, but as far as I know, it's not in use by default? Can this be used to drive the main high-frequency clock? Is it only for RTC use? Do I really need to use this at all?

The reason I'm asking is that even the cheapest boards from China has this crystal. And they are trying to cut costs everywhere, so I figured it maybe has to be there for a reason?

AFAIK for F401 it i mainly used for RTC and allow to have a better accuracy than the LSI.
I guess, this also allow to reach a better consumption in some Low Power mode.
Anyway for this kind of question you should ask on ST community. Here this is for issue related to the core and this issue is to list all variant requests.

AFAIK for F401 it i mainly used for RTC and allow to have a better accuracy than the LSI.
I guess, this also allow to reach a better consumption in some Low Power mode.

Thanks for the clarification. I understand you would like to keep this on-topic, so I'll rather ask in the community forums instead, no worries!

Back to the generic pinouts, Since I only have a 64-pin (Nucleo) 32F401R chip at the moment to work with, I started working on a generic pinout for this chip first. Is it OK for you guys if I keep the peripheral names as close to the metal as possible? This means we'll have Serial1, Serial2 and Serial6 as available objects, and the user can use setRx() and setTx() to change the pin location for each peripheral? If this is documented properly (I can help out) it should be fairly easy for the end-user to configure this properly.

By default, only one serialx instance is defined and mapped to Serial.
Most of the user only use one serial. I really don't think you should instantiate all possible Serial.
Mainly if the user need to change the mapping.
It is simplest to define it than changing the default pins.

If you want discuss about your variant it is better to open a new issue than polluted this one.

Can you add support for new BlackPill STM32F411CEU6?

@kargeor

Hi @kargeor
as the F401 version exists it should not be difficult to add this one.

The STM32F411CEU6 "Black Pill 2" apparently has 2 different board revisions:
WeACT V1.3 and WeAct V2.0.
The V2.0 has an additional "KEY" button, which binds pin A0 to GND when pressed.

I really can't wait support for this board...

Is support for NUCLEO-H745ZI-Q planned in the near future?

I just knocked up a quick Pill 411CE variant only to realise that it is already done.

There's an error in the variant.h however, it has the USER BUTTON (KEY) mapped to PC13, this is the builting LED pin, KEY is on pin A0. Further it will define this for all boards that are NOT defined as ARDUINO_BLACKPILL_F411CE. Have I misunderstood the logic?

@BennehBoy

@BennehBoy
there is no error.
LED is well defined to PC13 and no user button is defined for the ARDUINO_BLACKPILL_F411CE.
Anyway it seems there is one user button based on schemtaics I've found anyway I didn't see it on any pictures I've saw of the board (Weact 1.3 and 2.0).

Hi @dooodgers

Is support for NUCLEO-H745ZI-Q planned in the near future?

I did not plan to add it specifically. Moreover, H745 is the Dual-core lines.
Currently there is no dedicated management for Dual-core lines.

Anyway it seems there is one user button based on schemtaics I've found anyway I didn't see it on any pictures I've saw of the board (Weact 1.3 and 2.0).

https://github.com/mcauser/WEACT_F411CEU6/blob/master/docs/STM32F411CEU6_schematics.pdf
https://github.com/mcauser/WEACT_F411CEU6/blob/master/docs/STM32F411CEU6_pcb.pdf

Support for the HY-ministm32v would be really great, is it hard to add?
https://www.hotmcu.com/hyministm32v-dev-board-32-tft-lcd-module-p-5.html

FYI, STMicro has updated their STM32MP1 Family with models that have faster 800 MHz Cortex-A7 Processors, through the Cortex-M4 core still runs at same 209 MHz speed as previous models.

https://www.cnx-software.com/2020/02/27/stmicro-updates-stm32mp1-family-with-800-mhz-cortex-a7-processors/

https://blog.st.com/mpu-stm32mp1/

https://newsroom.st.com/media-center/press-item.html/p4236.html

@elsni

@elsni

Support for the HY-ministm32v would be really great, is it hard to add?
https://www.hotmcu.com/hyministm32v-dev-board-32-tft-lcd-module-p-5.html

This should not be too hard. refers to the Wiki how to add a new board. You can also create your own package and use this core.

I do not know the STM32 platform well for now, but it would be really great if you support the STM32F031K6T6 as included in https://www.st.com/en/evaluation-tools/nucleo-f031k6.html (it has Arduino Nano pin-to-pin headers).

And having support of STM32F413ZHT6 as included in https://www.st.com/en/evaluation-tools/32f413hdiscovery.html would be great too.

@N0rbert

@N0rbert

As it is mentioned in the OP:

This is a community projects so any help are welcome.
To add a STM32 based board follows this wiki

Any contribution is welcome, so feel free submit a PR. 😉

I too am interested in the Nucleo H745ZI. I realize it is a dual core system (Similarly to the ESP32), which is not currently supported. For a starting point, would there be a simple way to modify the existing code for the H743ZI to be compatible with the H745ZI, since they share the same Cortex M-7 CPU?

The ESP32's dual core API is quite easy to use and would be a great example to shoot for for dual core support in this project.

@Hackswell

@Hackswell
I've answered you on the forum. Please avoid to duplicate your questions and use only the forum for question/support. Thanks 😉

please add support for NUCLEO-L552ZE-Q

please add support for NUCLEO-L552ZE-Q

L5 introduction is planned. The this board could be added. Added to the list

Hoping to get variant support for the https://www.st.com/en/evaluation-tools/32f429idiscovery.html board including setting up the 64-Mbit SDRAM.

I'm guessing one could copy most of this variant to start? https://github.com/stm32duino/Arduino_Core_STM32/tree/master/variants/NUCLEO_F429ZI to start.

The only other variant I can see that uses SDRAM is https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/DAISY_SEED/ldscript.ld#L74 Is that a good example of how to setup SDRAM for the STM32F429I-DISC1?

@AnthonyDiGirolamo

@AnthonyDiGirolamo
Yes it will come. But before adding any new variant I have to end the #1091 PR as all the variant will have a different structure for genericity. WiKi will be updated as well.

@fpistm

I just bought a Nucleo G031K8 board and noticed it is not supported yet (it's already on the list in this issue, though). I'm about to create and submit a variant for it, but wondered if maybe someone (@fpistm) already has a WIP-version for this board I could use of base onto?

@matthijskooijman

Hi @matthijskooijman
No need to submit a PR. I'm currently reworking the variant definition for 2.0.0 release.
The Nucleo G031K8 will be part of this.

@fpistm

@fpistm Any preview I could maybe test? In need to do some tests with this particular chip/board in the coming days to see if it's feasible for a product we're working on :-)

Yes it could be possible.
Let me few hours to clean up my branch and I will provide it to you.

P.S.: all my best wishes for this new year. 😉

Awesome, thanks for your lightning quick and helpful (as always) reply! Best wishes for you as well! :-)

Please could you add generic F7 targets, such as STM32F722, STM32F745, STM32F765, etc?

@harry1453

Hi @harry1453
added to the list, with new release it will be lore easy to add generic variant as the main files required to create a variant is automatically generated and provided. Only clock config and ldscript need to be added.

STMicroelectronics STM32 H7 (STM32H7) Discovery Kits

STM32H735G-DK Discovery Kit with STM32H735IG = https://www.st.com/en/evaluation-tools/stm32h735g-dk.html

STM32H745I-DISCO Discovery Kit with STM32H745XI https://www.st.com/en/evaluation-tools/stm32h745i-disco.html

STM32H747I-DISCO Discovery Kit STM32H747XI https://www.st.com/en/evaluation-tools/stm32h747i-disco.html

STM32H750B-DK Discovery Kit with STM32H750XB https://www.st.com/en/evaluation-tools/stm32h750b-dk.html

STMicroelectronics Nucleo boards with STM32 H7 (STM32H7):

NUCLEO-H743ZI ( STM32H743ZI / STM32H743ZIT6U ) https://www.st.com/en/evaluation-tools/nucleo-h743zi.html

NUCLEO-H745ZI-Q ( STM32H745ZI / STM32H745ZIT6U ) https://www.st.com/en/evaluation-tools/nucleo-h745zi-q.html

NUCLEO-H755ZI-Q ( STM32H755ZI/STM32H755ZIT6U ) https://www.st.com/en/evaluation-tools/nucleo-h755zi-q.html

NUCLEO-H753ZI ( STM32H753ZI/STM32H753ZIT6U ) https://www.st.com/en/evaluation-tools/nucleo-h753zi.html

NUCLEO-H723ZG ( STM32H723ZG / STM32H723ZGT6U ) https://www.st.com/en/evaluation-tools/nucleo-h723zg.html

NUCLEO-H7A3ZI-Q ( STM32H7A3ZI / STM32H7A3ZIT6QU ) https://www.st.com/en/evaluation-tools/nucleo-h7a3zi-q.html

PS: Also see MarlinFirmware/Marlin#19751 which has more links of both generic and custom boards with STM32 H7 (STM32H7).

NUCLEO-G474RE development board has STM32G474RE MCU

https://www.st.com/en/evaluation-tools/nucleo-g474re.html

NUCLEO-G491RE development board has STM32G491RE MCU

https://www.st.com/en/evaluation-tools/nucleo-g491re.html

@Gamester17

Hi @Gamester17
Nucleo G474RE is already available.

I've added the NUCLEO-G491RE in the list.

I'd love to see support for the STM32L4R9AI (ultra low power MCU) and it's associated STM32L4R9I-DISCO board for circular LCD development!

Seeed Studio has launched a new range of LoRa-E5 boards based on the STM32WLE5JC:

Up to now, only the STM32Cube MCU Package for STM32WL series is listed as SDK.

Adding support for those boards could broaden the user’s base and foster new applications. Thank you!

@fpistm

Added support for STM32F105R8/B/C. The pinmap is generated through genpinmap, clock config generated by STM32Cube.

https://github.com/ttimasdf/Arduino_Core_STM32/tree/variant-generic-stm32f105x

The board config file is also available for testing. see platformio/platform-ststm32#499

Could you please add it to the list for the record? @fpistm I think it may contain (or replace) the support to the board suggested by #869

And here's platformio configuration snippet for building the project, in case anyone wants to test it.

[env:f105rc]
platform = ststm32
framework = arduino

board = genericSTM32F105RC
platform_packages = 
	framework-arduinoststm32 @ https://github.com/ttimasdf/Arduino_Core_STM32#variant-generic-stm32f105x

@ttimasdf

Hi @ttimasdf
I will add it with the new format.

Hello, I want to add a new variant so I can use my STM H723ZG with Arduino. I was a little confused by the naming within the variants folder. Would my board (NUCLEO-H723ZG) be in the folder "H723Z(E-G)I_H730ZBI_H733ZGI" or in the folder "H723Z(E-G)T_H733ZGT"?

@williamalexmoran

Hi @williamalexmoran
as stated in the databrief: (https://www.st.com/en/evaluation-tools/nucleo-h723zg.html)

it is a STM32H723ZGT6 so you should use the H723Z(E-G)T_H733ZGT

Hello,

I would like to add support for Nucleo-L4P5ZG like stated over there in the forums: https://www.stm32duino.com/viewtopic.php?f=12&t=1063

I somehow succeeded to modify the files so that a project compiles for the Nucleo-L4P5ZG and successfully downloads to the board.

But I am completely new to github and don't know how to use it properly...

Do I have to clone this repository to my local disk?
If so, what local folder should I use? the current stm32-arduino folder in my arduino installation?
How do I get my modified files up here?

Hi @Pestimist
First you should read the https://github.com/stm32duino/Arduino_Core_STM32/blob/master/CONTRIBUTING.md
Mainly Pull Requests section.

ok, thank you!

Hi all,

I'm working on adding support for the Seeed studios LoRa E5 mini board.
It uses an STM32WLE5JCIx, with has an SX1262 LoRa transceiver integrated on an internal "subghz" SPI bus.
This board has serial pins on PB6/PB7, a LED on PB5, user button, and a radio Tx/Rx switch on pins PA4/PA5.

The plan is to add this under 'Generic STM32WL series', then as variant 'Seeed LoRa E5 mini', a bit like the 'Generic node SE (TTI)" from TheThingsIndustries.

Work in progress will appear at my fork:
https://github.com/bertrik/Arduino_Core_STM32

Hi,
Could someone please help me with STM32MP1.
I have updated PlatformIO to the latest version now but I am still not getting the option for STM32MP1 board in the Board Selector.

@HammadK44

Hi @HammadK44, you should ask to pio.

You can comments on this one: platformio/platform-ststm32#470

Im looking to help with adding support for the MCU's on this list. Can I get a confirmation that anything here wihtout a "Tick" is still outstanding, and still required?

the MCU's on this list. Can I get a confirmation that anything here wihtout a "Tick" is still outstanding, and still required?

Normally yes. We try to keep the list up to date, anyway a mistake can always exists 😉 but easy to fix. When you add a board if you see it in the boards.txt it is probably already added.

Perfect, I will look into doing a few of those when I find the time. I dont have the boards to test, but hope the definitions untested are better than no definition at all ;)

I request you to add STM32F030K6 as new generic , it is yet to be added in release 2.4.0 . i am wating for it. Is there any way i can program it using existing 2.3.0 release

@anupam-dubey

I request you to add STM32F030K6 as new generic , it is yet to be added in release 2.4.0 . i am wating for it. Is there any way i can program it using existing 2.3.0 release

Hi @anupam-dubey
yes it was added here: #1792
You can get the files from the directory and add entry board in the boards.txt.

Hello, is there any update on NUCLEO-H7A3ZI-Q support? Otherwise how can I contribute? Thanks!

You can refers to https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 to add at least the generic variant.

Hello, is it possible to add STM32F030CC support please? It is a nice alternative to samd21g18 chip with 256k flash in LQFP48 package.

Hello, is it possible to add STM32F030CC support please? It is a nice alternative to samd21g18 chip with 256k flash in LQFP48 package.

Added to the list

Hello, is it possible to add STM32F030CC support please? It is a nice alternative to samd21g18 chip with 256k flash in LQFP48 package.

Added to the list

Thank you

Would it be possible to add the Nucleo-C031C6 (Nucleo-64) board? I would be very grateful.

Would it be possible to add the Nucleo-C031C6 (Nucleo-64) board? I would be very grateful.

It is available in the main branch. I've just added STM32C0 support. See #1926.

Hi!
I've tried to add STM32F105VCT6 step by step by instructions, but can't see it in dropdown menu after IDE restart. Please help.

@MAXiDROME

F105VCT6 step by step by instructions, but can't see it in dropdown menu after IDE restart. Please help.

Hi @MAXiDROME
we can't help with this kinf of info. Open a discussion then share your config, how you proceed and your patch.

Thank you for adding H5 the other day.
I was able to get the NUCLEO-H503RB this time, so could you add it...?

@dojyorin

Hi @dojyorin

Thank you for adding H5 the other day. I was able to get the NUCLEO-H503RB this time, so could you add it...?

Welcome. Anyway, I will not have time to add it. I've added the 2 others to test the STM32H5 support. Moreover I do not have this one. Feel free to add it yourself and submit a PR. It is a community project any contributions are welcome. 😉

@fpistm

@fpistm Sorry for being selfish while you're busy.
I don't know if I can do it properly, but I'll try to submit pull request first.

Are there any plans to add the STM32C011J6Mx series processors?

@lukemagdalin

Hi @lukemagdalin
this is a community project, do not hesitate to contribute. Adding generic MCU support is not so hard. Feel free to submit a PR.

NUCLEO-U5A5ZJ-Q is a STM32 Nucleo-144 development board.
Can we support it?
Thanks!

NUCLEO-U5A5ZJ-Q @ ST

I checked the list, H755ZI already requested, but please do expedite, thanks :-)

I checked the list, H755ZI already requested, but please do expedite, thanks :-)

Feel free to contribute. 😉

ST recently released the STM32U0 line of microcontrollers. It would be nice if this could support them.

@besser435

ST recently released the STM32U0 line of microcontrollers. It would be nice if this could support them.

Hi @besser435, this is not really a new variant. First the STM32U0xx support have to be added.
Feel free to open a issue to request it.

Can we add these two?

STM32C071R8
STM32C071RB

Or if it needs to be more specific, those pages under Sample & Buy contains these:
STM32C071RBT6N
STM32C071RBI6N
STM32C071RBT6
STM32C071R8T6
STM32C071R8T6N
STM32C071R8I6N

STM32C071RBT6 is the one I am personally most interested in.

@thernstig

H @thernstig

Can we add these two?

Of course. Feel free to submit a PR, this is a community project all contributions are welcome.

@fpistm

@fpistm I will give it a shot in a day or three. The wiki seems good. I hope there is some support channel if I get stuck, but I'll take a closer look at the wiki once I do.

Q: Should the original post be updated? It is hard to gauge how the original post works. I assume it contains previous requests, but some are checkmarked because they have been merged. Is there an idea to maybe clean up the original post to remove all already-implemented boards? I see the list as a quick overview of what is not implemented for users coming here, so they do not write a new post (like mine above) to add more to the list.

@thernstig

@thernstig You're right, I've made a clean up and update the description. Hope it is more clear now

@fpistm

Hello @fpistm
Sorry for the link, the problem description is there
platformio/platform-ststm32#160 (comment)

@brightproject

@brightproject
Use cubeMx to generate the clock config as described in the wiki.

I generated it without changing anything in the graphic designer, the function turned out like this:

void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

/** Initializes the RCC Oscillators according to the specified parameters

in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.PLL2.PLL2State = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}

/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
{
Error_Handler();
}

/** Configure the Systick interrupt time
*/
__HAL_RCC_PLLI2S_ENABLE();
}

It seemed to me that SystemClock_Config is similar to f103, the clock frequency for all is 72 MHz.

@brightproject

@brightproject
please in this kind of request open a discussion instead of pollute an issue opened only to reference board request.

Hi, I'd like to request support for the NUCLEO-C092RC (and/or any MCU from the STM32C092 series)

Thanks

@txf-

Hi @txf-

Hi, I'd like to request support for the NUCLEO-C092RC (and/or any MCU from the STM32C092 series)

Thanks

PR ongoing for this mcu, #2735

Please, add support for STM32H523 series; partucularly, for WeAct STM32H523CET6 demo board: https://github.com/WeActStudio/WeActStudio.STM32H523CoreBoard/

Thank you!

Made Custom driver and project using PlatformIO in VScode here for the Aliexpress modules.

https://github.com/NeutralSystem/STM32_DX-LR20_LORA

Made Custom driver and project using PlatformIO in VScode here for the Aliexpress modules.

https://github.com/NeutralSystem/STM32_DX-LR20_LORA

Better place would be here: https://github.com/orgs/stm32duino/discussions/categories/show-and-tell

Made Custom driver and project using PlatformIO in VScode here for the Aliexpress modules.
https://github.com/NeutralSystem/STM32_DX-LR20_LORA

Better place would be here: https://github.com/orgs/stm32duino/discussions/categories/show-and-tell

Thanks, posted it there now.

I want to request support for the WeAct Studio STM32U585CIU6. Thank you all for your great efforts.

Navigation Menu

Repository navigation

[New Variant] request list #722

Board support requested:

Discovery

Nucleo

Generic / Custom

3D printer:

LoRa:

STMicroelectronics STM32 H7 (STM32H7) Discovery Kits

STMicroelectronics Nucleo boards with STM32 H7 (STM32H7):

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

[New Variant] request list #722

Description

Board support requested:

Discovery

Nucleo

Generic / Custom

3D printer:

LoRa:

Activity

MCUdude commented on Nov 19, 2019

fpistm commented on Nov 19, 2019

MCUdude commented on Nov 19, 2019

fpistm commented on Nov 19, 2019

kargeor commented on Jan 3, 2020

fpistm commented on Jan 3, 2020

TzOk83 commented on Jan 10, 2020

codebk1 commented on Mar 1, 2020

BennehBoy commented on Mar 1, 2020

fpistm commented on Mar 2, 2020

fpistm commented on Mar 2, 2020

TzOk83 commented on Mar 2, 2020

elsni commented on Mar 2, 2020

Hedda commented on Mar 2, 2020

fpistm commented on Mar 2, 2020

N0rbert commented on Mar 3, 2020

N0rbert commented on Mar 3, 2020

fpistm commented on Mar 4, 2020

stevewells20 commented on Apr 13, 2020

fpistm commented on Apr 24, 2020

lutfisan commented on Nov 10, 2020

fpistm commented on Nov 10, 2020

AnthonyDiGirolamo commented on Dec 15, 2020

fpistm commented on Dec 15, 2020

matthijskooijman commented on Jan 22, 2021

fpistm commented on Jan 22, 2021

matthijskooijman commented on Jan 22, 2021

fpistm commented on Jan 22, 2021

matthijskooijman commented on Jan 22, 2021

harryjph commented on Feb 12, 2021

fpistm commented on Feb 12, 2021

Hedda commented on Feb 12, 2021

STMicroelectronics STM32 H7 (STM32H7) Discovery Kits

STMicroelectronics Nucleo boards with STM32 H7 (STM32H7):

Gamester17 commented on Feb 15, 2021

fpistm commented on Feb 15, 2021

keystoneclimber commented on Feb 23, 2021

rei-vilo commented on Mar 5, 2021

ttimasdf commented on Mar 15, 2021

fpistm commented on Mar 15, 2021

williamalexmoran commented on Jul 1, 2021

fpistm commented on Jul 1, 2021

PerennialNovice commented on Sep 29, 2021

fpistm commented on Sep 29, 2021

PerennialNovice commented on Sep 29, 2021

bertrik commented on Oct 17, 2021

HammadK44 commented on Dec 17, 2021

fpistm commented on Dec 17, 2021

fpistm commented on Dec 17, 2021

alextrical commented on Aug 30, 2022

fpistm commented on Aug 30, 2022

alextrical commented on Aug 30, 2022

anupam-dubey commented on Oct 8, 2022

fpistm commented on Oct 10, 2022

adrianpi commented on Oct 19, 2022

fpistm commented on Oct 19, 2022

orhanyor commented on Jan 24, 2023

fpistm commented on Jan 25, 2023

orhanyor commented on Jan 25, 2023

MandoRick commented on Jan 28, 2023

fpistm commented on Jan 28, 2023

MAXiDROME commented on Mar 11, 2023

fpistm commented on Mar 13, 2023

dojyorin commented on Jun 16, 2023

fpistm commented on Jun 16, 2023

dojyorin commented on Jun 17, 2023

lukemagdalin commented on Aug 2, 2023

fpistm commented on Aug 2, 2023

HonestQiao commented on Nov 10, 2023

9to1url commented on Apr 7, 2024

fpistm commented on Apr 8, 2024