diff --git a/CCGX-Modbus-TCP-register-list.xlsx b/CCGX-Modbus-TCP-register-list.xlsx
index 238b938..fae5ccb 100644
Binary files a/CCGX-Modbus-TCP-register-list.xlsx and b/CCGX-Modbus-TCP-register-list.xlsx differ
diff --git a/attributes.csv b/attributes.csv
index 839a0e6..2a731fb 100644
--- a/attributes.csv
+++ b/attributes.csv
@@ -37,7 +37,7 @@ com.victronenergy.vebus,/Dc/0/Current,d,A DC,27,int16,10,R
 com.victronenergy.vebus,/Ac/NumberOfPhases,u,count,28,uint16,1,R
 com.victronenergy.vebus,/Ac/ActiveIn/ActiveInput,u,0=AC Input 1;1=AC Input 2;240=Disconnected,29,uint16,1,R
 com.victronenergy.vebus,/Soc,d,%,30,uint16,10,W
-com.victronenergy.vebus,/State,u,0=Off;1=Low Power;2=Fault;3=Bulk;4=Absorption;5=Float;6=Storage;7=Equalize;8=Passthru;9=Inverting;10=Power assist;11=Power supply;252=External control,31,uint16,1,R
+com.victronenergy.vebus,/State,u,0=Off;1=Low Power;2=Fault;3=Bulk;4=Absorption;5=Float;6=Storage;7=Equalize;8=Passthru;9=Inverting;10=Power assist;11=Power supply;250=Blocked;252=External control,31,uint16,1,R
 com.victronenergy.vebus,/VebusError,u,0=No error;1=VE.Bus Error 1: Device is switched off because one of the other phases in the system has switched off;2=VE.Bus Error 2: New and old types MK2 are mixed in the system;3=VE.Bus Error 3: Not all- or more than- the expected devices were found in the system;4=VE.Bus Error 4: No other device whatsoever detected;5=VE.Bus Error 5: Overvoltage on AC-out;6=VE.Bus Error 6: Error in DDC Program;7=VE.Bus BMS connected- which requires an Assistant- but no assistant found;10=VE.Bus Error 10: System time synchronisation problem occurred;14=VE.Bus Error 14: Device cannot transmit data;16=VE.Bus Error 16: Dongle missing;17=VE.Bus Error 17: One of the devices assumed master status because the original master failed;18=VE.Bus Error 18: AC Overvoltage on the output of a slave has occurred while already switched off;22=VE.Bus Error 22: This device cannot function as slave;24=VE.Bus Error 24: Switch-over system protection initiated;25=VE.Bus Error 25: Firmware incompatibility. The firmware of one of the connected device is not sufficiently up to date to operate in conjunction with this device;26=VE.Bus Error 26: Internal error,32,uint16,1,R
 com.victronenergy.vebus,/Mode,u,1=Charger Only;2=Inverter Only;3=On;4=Off,33,uint16,1,W
 com.victronenergy.vebus,/Alarms/HighTemperature,u,0=Ok;1=Warning;2=Alarm,34,uint16,1,R