Skip to content

Intrusive "HyDE shell script sourced" message on terminal and lock screen #1007

New issue
New issue
Closed
Closed
Intrusive "HyDE shell script sourced" message on terminal and lock screen#1007
Labels
bugSomething isn't working
@oz1m

Description

@oz1m
oz1m
opened on Jul 16, 2025

Description

Bug Description

An informational message, "HyDE shell script sourced. Use 'hyde-shell --help' for usage information.", is displayed every time a new terminal is opened and also appears on the lock screen. While informational, its persistent appearance in multiple UI components feels intrusive and behaves more like a bug than a feature.

Steps to Reproduce

  1. Install HyDE following the standard procedure.
  2. Open a new terminal. The message appears.
  3. Lock the screen (e.g., using hyde-shell lockscreen.sh). The message is visible on the lock screen UI.

Investigation Details

The message originates from the last lines of the Configs/.local/bin/hyde-shell script:

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
    # ... logic for direct execution
else
    echo "HyDE shell script sourced. Use 'hyde-shell --help' for usage information."
fi

This confirms the script is being sourced (e.g., via source hyde-shell or . hyde-shell) rather than executed directly.

  • When the echo line is temporarily removed, the message disappears from the terminal but remains on the lock screen. This strongly suggests that multiple components are sourcing this script.
  • The lock screen is triggered by lockscreen.sh, which sources globalcontrol.sh. The trail indicates that some part of the environment initialization, used by both interactive shells and system components like the lock screen, is sourcing hyde-shell.
  • The shell configuration files (~/.config/zsh/.zshenv, ~/.config/zsh/conf.d/00-hyde.zsh, etc.) are responsible for setting up the environment, and one of them likely sources hyde-shell to make its functions available globally.

Suspected Cause

The core issue is that hyde-shell is being sourced by shell configuration files to provide its functions and aliases to the interactive shell. However, this also affects non-interactive environments that use the same startup files, like the lock screen, leading to the message appearing in unexpected places.

This error started appearing after the last HyDE update, before that, it just worked as expected.

Steps to Reproduce

  1. Install HyDE following the standard procedure.
  2. Open a new terminal. The message appears.
  3. Lock the screen (e.g., using hyde-shell lockscreen.sh). The message is visible on the lock screen UI.

Expected Behavior

It should not show the information message

Actual Behavior

It shows the information message

Screenshots

Image

Environment

Hyprland 0.49.0 built from branch at commit 9958d297641b5c84dcff93f9039d80a5ad37ab00 (version: bump to 0.49.0). Date: Thu May 8 20:15:18 2025 Tag: v0.49.0, commits: 6098 built against: aquamarine 0.9.1 hyprlang 0.6.3 hyprutils 0.8.1 hyprcursor 0.1.12 hyprgraphics 0.1.4

no flags were set

System Information:
System name: Linux
Node name: carboncito
Release: 6.15.6-arch1-1
Version: #1 SMP PREEMPT_DYNAMIC Thu, 10 Jul 2025 17:10:18 +0000

GPU information:
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] HawkPoint1 [1002:1900] (rev c2) (prog-if 00 [VGA controller])

os-release: NAME="Arch Linux"
PRETTY_NAME="Arch Linux"
ID=arch
BUILD_ID=rolling
ANSI_COLOR="38;2;23;147;209"
HOME_URL="https://archlinux.org/"
DOCUMENTATION_URL="https://wiki.archlinux.org/"
SUPPORT_URL="https://bbs.archlinux.org/"
BUG_REPORT_URL="https://gitlab.archlinux.org/groups/archlinux/-/issues"
PRIVACY_POLICY_URL="https://terms.archlinux.org/docs/privacy-policy/"
LOGO=archlinux-logo

plugins:

======Config-Start======

Config File: /home/oz/.config/hypr/hyprland.conf: Read Succeeded
#!   ░▒▒▒░░░▓▓          ___________
#! ░░▒▒▒░░░░░▓▓        //__________/
#! ░░▒▒▒░░░░░▓▓     _   _ _    _ _____
#! ░░▒▒░░░░░▓▓▓▓▓▓ | | | | |  | |  /
#! ░▒▒░░░░▓▓   ▓▓ | || | |/ /| |
#!  ░▒▒░░▓▓   ▓▓   __  |/ |/
#!    ░▒▓▓   ▓▓  //____/

#? Read https://hydeproject.pages.dev/en/configuring/hyprland/ for the full documentation.

source = $HOME/.local/share/hyde/hyprland.conf # HyDE's core configuration // DO NOT TOUCH!!! ( ｡ •̀ ᴖ •́ ｡)
source = ./keybindings.conf # Keyboard shortcuts
source = ./windowrules.conf # Window rules
source = ./monitors.conf # Monitor configuration
source = ./userprefs.conf # Your hyprland configuration // Edit this file to change your Hyprland configuration
source = ./workflows.conf # workflows configuration overrides everything

// ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗

// ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝

// ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░

// ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░

// ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░

// ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░

Config File: /home/oz/.local/share/hyde/hyprland.conf: Read Succeeded
#!   ░▒▒▒░░░▓▓          ___________
#! ░░▒▒▒░░░░░▓▓        //__________/
#! ░░▒▒▒░░░░░▓▓     _   _ _    _ _____
#! ░░▒▒░░░░░▓▓▓▓▓▓ | | | | |  | |  /
#! ░▒▒░░░░▓▓   ▓▓ | || | |/ /| |
#!  ░▒▒░░▓▓   ▓▓   __  |/ |/
#!    ░▒▓▓   ▓▓  //____/

// ██████╗░░█████╗░  ███╗░░██╗░█████╗░████████╗  ███████╗██████╗░██╗████████╗

// ██╔══██╗██╔══██╗  ████╗░██║██╔══██╗╚══██╔══╝  ██╔════╝██╔══██╗██║╚══██╔══╝

// ██║░░██║██║░░██║  ██╔██╗██║██║░░██║░░░██║░░░  █████╗░░██║░░██║██║░░░██║░░░

// ██║░░██║██║░░██║  ██║╚████║██║░░██║░░░██║░░░  ██╔══╝░░██║░░██║██║░░░██║░░░

// ██████╔╝╚█████╔╝  ██║░╚███║╚█████╔╝░░░██║░░░  ███████╗██████╔╝██║░░░██║░░░

// ╚═════╝░░╚════╝░  ╚═╝░░╚══╝░╚════╝░░░░╚═╝░░░  ╚══════╝╚═════╝░╚═╝░░░╚═╝░░░

$scrPath=$HOME/.local/lib/hyde # set scripts path

Main modifier

$mainMod = SUPER # windows key

assign apps

$default.$QUICKAPPS =
$default.BROWSER = hyde-launch.sh --fall firefox web-browser
$default.EDITOR = hyde-launch.sh --fall code-oss text-editor
$default.EXPLORER= hyde-launch.sh --fall dolphin file-manager
$default.TERMINAL = kitty
$default.LOCKSCREEN=hyprlock
$default.IDLE=hypridle

$QUICKAPPS = $default.$QUICKAPPS
$BROWSER = $default.BROWSER
$EDITOR = $default.EDITOR
$EXPLORER= $default.EXPLORER
$TERMINAL = $default.TERMINAL
$LOCKSCREEN=$default.LOCKSCREEN
$IDLE= $default.IDLE

// █░░ ▄▀█ █░█ █▄░█ █▀▀ █░█

// █▄▄ █▀█ █▄█ █░▀█ █▄▄ █▀█

See https://wiki.hyprland.org/Configuring/Keywords/

$start.XDG_PORTAL_RESET=$scrPath/resetxdgportal.sh
$start.DBUS_SHARE_PICKER=dbus-update-activation-environment --systemd --all # for XDPH
$start.SYSTEMD_SHARE_PICKER=systemctl --user import-environment QT_QPA_PLATFORMTHEME WAYLAND_DISPLAY XDG_CURRENT_DESKTOP # for XDPH
$start.BAR=$scrPath/waybar.py --watch --update
$start.NOTIFICATIONS=dunst
$start.APPTRAY_BLUETOOTH=blueman-applet
$start.WALLPAPER=$scrPath/wallpaper.sh --global
$start.TEXT_CLIPBOARD=wl-paste --type text --watch cliphist store
$start.IMAGE_CLIPBOARD=wl-paste --type image --watch cliphist store
$start.CLIPBOARD_PERSIST=wl-clip-persist --clipboard regular
$start.BATTERY_NOTIFY=$scrPath/batterynotify.sh
$start.NETWORK_MANAGER=nm-applet --indicator
$start.REMOVABLE_MEDIA=udiskie --no-automount --smart-tray
$start.AUTH_DIALOGUE=$scrPath/polkitkdeauth.sh
$start.IDLE_DAEMON=$IDLE

// █▀▀ █▄░█ █░█

// ██▄ █░▀█ ▀▄▀

See https://wiki.hyprland.org/Configuring/Environment-variables/

Toolkit Backend Variables - https://wiki.hyprland.org/Configuring/Environment-variables/#toolkit-backend-variables

$env.GDK_BACKEND = wayland,x11,* # GTK: Use wayland if available. If not: try x11, then any other GDK backend.

$env.QT_QPA_PLATFORM = wayland;xcb # Qt: Use wayland if available, fall back to x11 if not.

$env.SDL_VIDEODRIVER = wayland # Run SDL2 applications on Wayland. Remove or set to x11 if games that provide older versions of SDL cause compatibility issues
$env.CLUTTER_BACKEND = wayland # Clutter package already has wayland enabled, this variable will force Clutter applications to try and use the Wayland backend

XDG Specifications - https://wiki.hyprland.org/Configuring/Environment-variables/#xdg-specifications

$env.XDG_CURRENT_DESKTOP = Hyprland
$env.XDG_SESSION_TYPE = wayland
$env.XDG_SESSION_DESKTOP = Hyprland

Qt Variables - https://wiki.hyprland.org/Configuring/Environment-variables/#qt-variables

$env.QT_AUTO_SCREEN_SCALE_FACTOR = 1 # (From the Qt documentation) enables automatic scaling, based on the monitor’s pixel density
$env.QT_QPA_PLATFORM = wayland;xcb # Tell Qt applications to use the Wayland backend, and fall back to x11 if Wayland is unavailable
$env.QT_WAYLAND_DISABLE_WINDOWDECORATION = 1 # Disables window decorations on Qt applications
$env.QT_QPA_PLATFORMTHEME = qt6ct # Tells Qt based applications to pick your theme from qt5ct, use with Kvantum.

HyDE Environment Variables -

$env.PATH =
$env.MOZ_ENABLE_WAYLAND=1 # Enable Wayland for Firefox
$env.GDK_SCALE=1 # Set GDK scale to 1 // For Xwayland on HiDPI
$env.ELECTRON_OZONE_PLATFORM_HINT=auto # Set Electron Ozone Platform Hint to auto // For Electron apps on Wayland

XDG-DIRS

$XDG_RUNTIME_DIR=${XDG_RUNTIME_DIR:-/run/user/$(id -u)}

$XDG_CONFIG_HOME=${XDG_CONFIG_HOME:-$HOME/.config}

>> $env.XDG_CACHE_HOME=${XDG_CACHE_HOME:-$HOME/.cache}

$XDG_DATA_HOME=${XDG_DATA_HOME:-$HOME/.local/share}

$env.XDG_RUNTIME_DIR=$XDG_RUNTIME_DIR
$env.XDG_CONFIG_HOME=$HOME/.config
$env.XDG_CACHE_HOME=$HOME/.cache
$env.XDG_DATA_HOME=$HOME/.local/share
$env.XDG_STATE_HOME=$HOME/.local/state

// █▀▀ ▀█▀ █▄▀

// █▄█ ░█░ █░█

$default.GTK_THEME=Wallbash-Gtk
$default.ICON_THEME=Tela-circle-dracula
$default.COLOR_SCHEME=prefer-dark

$GTK_THEME=$default.GTK_THEME
$ICON_THEME=$default.ICON_THEME
$COLOR_SCHEME=$default.COLOR_SCHEME

$BUTTON_LAYOUT= #? colon separated list of buttons, e.g. appmenu:minimize,maximize,close

// █▀▀ █░█ █▀█ █▀ █▀█ █▀█

// █▄▄ █▄█ █▀▄ ▄█ █▄█ █▀▄

$default.CURSOR_THEME=Bibata-Modern-Ice
$default.CURSOR_SIZE=24

$CURSOR_THEME=$default.CURSOR_THEME
$CURSOR_SIZE=$default.CURSOR_SIZE

// █▀▀ █▀█ █▄░█ ▀█▀

// █▀░ █▄█ █░▀█ ░█░

$default.FONT=Cantarell
$default.FONT_SIZE=10
$default.DOCUMENT_FONT=Cantarell
$default.DOCUMENT_FONT_SIZE=10
$default.MONOSPACE_FONT=CaskaydiaCove Nerd Font Mono
$default.MONOSPACE_FONT_SIZE=9
$default.NOTIFICATION_FONT=Mononoki Nerd Font Mono
$default.BAR_FONT=JetBrainsMono Nerd Font

$default.MENU_FONT=This is not yet set as it looks perfect with the global font

$default.FONT_ANTIALIASING=rgba
$default.FONT_HINTING=full

$FONT=$default.FONT
$FONT_SIZE=$default.FONT_SIZE
$DOCUMENT_FONT=$default.DOCUMENT_FONT
$DOCUMENT_FONT_SIZE=$default.DOCUMENT_FONT_SIZE
$MONOSPACE_FONT=$default.MONOSPACE_FONT
$MONOSPACE_FONT_SIZE=$default.MONOSPACE_FONT_SIZE
$NOTIFICATION_FONT=$default.NOTIFICATION_FONT
$BAR_FONT=$default.BAR_FONT

$MENU_FONT=$default.MENU_FONT

$FONT_ANTIALIASING=$default.FONT_ANTIALIASING
$FONT_HINTING=$default.FONT_HINTING

// █▀▄▀█ █▀█ █▄░█ █ ▀█▀ █▀█ █▀█

// █░▀░█ █▄█ █░▀█ █ ░█░ █▄█ █▀▄

See https://wiki.hyprland.org/Configuring/Monitors/

monitor = ,preferred,auto,auto

// █▀ █▀█ █▀▀ █▀▀ █ ▄▀█ █░░

// ▄█ █▀▀ ██▄ █▄▄ █ █▀█ █▄▄

decoration {
dim_special = 0.3
active_opacity = 0.90
inactive_opacity = 0.75
fullscreen_opacity = 1
blur {
special = true
}
}

// ▄▀█ █▄░█ █ █▀▄▀█ ▄▀█ ▀█▀ █ █▀█ █▄░█

// █▀█ █░▀█ █ █░▀░█ █▀█ ░█░ █ █▄█ █░▀█

See https://wiki.hyprland.org/Configuring/Animations/

animations {
enabled = yes
bezier = wind, 0.05, 0.9, 0.1, 1.05
bezier = winIn, 0.1, 1.1, 0.1, 1.1
bezier = winOut, 0.3, -0.3, 0, 1
bezier = liner, 1, 1, 1, 1
animation = windows, 1, 6, wind, slide
animation = windowsIn, 1, 6, winIn, slide
animation = windowsOut, 1, 5, winOut, slide
animation = windowsMove, 1, 5, wind, slide
animation = border, 1, 1, liner
animation = borderangle, 1, 30, liner, once
animation = fade, 1, 10, default
animation = workspaces, 1, 5, wind
}

// █ █▄░█ █▀█ █░█ ▀█▀

// █ █░▀█ █▀▀ █▄█ ░█░

input {
# See https://wiki.hyprland.org/Configuring/Variables/#input
accel_profile = flat
numlock_by_default = true
}

gestures {
#See https://wiki.hyprland.org/Configuring/Variables/#gestures
workspace_swipe = true
}

// █░░ ▄▀█ █▄█ █▀█ █░█ ▀█▀ █▀

// █▄▄ █▀█ ░█░ █▄█ █▄█ ░█░ ▄█

See https://wiki.hyprland.org/Configuring/Dwindle-Layout/

dwindle {
pseudotile = yes
preserve_split = yes
}

See https://wiki.hyprland.org/Configuring/Master-Layout/

master {
new_status = master
}

// █▀▄▀█ █ █▀ █▀▀

// █░▀░█ █ ▄█ █▄▄

See https://wiki.hyprland.org/Configuring/Variables/#misc

misc {
vrr = 0
disable_hyprland_logo = true
disable_splash_rendering = true
force_default_wallpaper = 0
}

xwayland {
force_zero_scaling = true
}

general {
snap { # snapping for floating windows
enabled = true
}
}

// █▀ █▀█ █░█ █▀█ █▀▀ █▀▀

// ▄█ █▄█ █▄█ █▀▄ █▄▄ ██▄

$SCREEN_SHADER_COMPILED=$env.XDG_CONFIG_HOME/hypr/shaders/.compiled.cache.glsl

hyprlang noerror true

source = $env.XDG_STATE_HOME/hyde/hyprgui.conf # GUI specific config. Used to not break the low level configs. this will be available downstream

source = $env.XDG_CONFIG_HOME/hypr/themes/colors.conf # Hyde wallbash colors

Source groupbar in here

group:groupbar {
enabled = true
gradients = 1
render_titles = 1
font_weight_inactive = normal
font_weight_active = semibold
col.active = rgba($wallbash_pry3ee)
col.inactive = rgba($wallbash_pry1ee)
col.locked_active = rgba($wallbash_pry2ee)
col.locked_inactive = rgba($wallbash_pry4ee)
text_color = rgba($wallbash_txt3ee)
text_color_inactive = rgba($wallbash_txt1ee)
}

source = $env.XDG_CONFIG_HOME/hypr/themes/theme.conf # theme specific settings
source = $env.XDG_CONFIG_HOME/hypr/themes/wallbash.conf # Theme specific settings after Sanitize and handle fallbacks
source = $env.XDG_CONFIG_HOME/hypr/nvidia.conf # Nvidia specific settings
source = $env.XDG_CONFIG_HOME/hypr/animations.conf # source animations variables
source = $env.XDG_CONFIG_HOME/hypr/shaders.conf # source shader variables

hyprlang noerror false

source = $env.XDG_CONFIG_HOME/hypr/hyde.conf

hyprlang noerror true

source = $env.XDG_STATE_HOME/hyde/hyprland.conf # translated from config.toml // should override everything!
decoration:screen_shader = $SCREEN_SHADER_COMPILED #! This is the compiled shader file, it will be created by the shaders.sh script

hyprlang noerror false

#! Below this is an immutable part of the configuration file, and should not be modified by the user.

#? By Hyprland convention env and startup files are sourced at the end of the main configuration file
#? To ensure that the user's settings are not overridden by the default settings
#? This will let us launch after all envs and variables are set.

LEGACY

$quickapps = $QUICKAPPS
$term = $TERMINAL
$editor = $EDITOR
$file = $EXPLORER
$browser = $BROWSER

Group Bar

group:groupbar{
font_size = $FONT_SIZE
font_family = $GROUPBAR_FONT
}

Misc

misc {
font_family = $FONT
}

// █▀▀ █▄░█ █░█

// ██▄ █░▀█ ▀▄▀

# See https://wiki.hyprland.org/Configuring/Environment-variables/

#! Remove for now

env = GDK_BACKEND,$env.GDK_BACKEND

env = SDL_VIDEODRIVER,$env.SDL_VIDEODRIVER

env = CLUTTER_BACKEND,$env.CLUTTER_BACKEND

Qt Variables

env = QT_AUTO_SCREEN_SCALE_FACTOR,$env.QT_AUTO_SCREEN_SCALE_FACTOR
env = QT_QPA_PLATFORM,$env.QT_QPA_PLATFORM
env = QT_WAYLAND_DISABLE_WINDOWDECORATION,$env.QT_WAYLAND_DISABLE_WINDOWDECORATION
env = QT_QPA_PLATFORMTHEME,$env.QT_QPA_PLATFORMTHEME

Wayland-ENV

env = MOZ_ENABLE_WAYLAND,$env.MOZ_ENABLE_WAYLAND
env = GDK_SCALE,$env.GDK_SCALE
env = ELECTRON_OZONE_PLATFORM_HINT,$env.ELECTRON_OZONE_PLATFORM_HINT

XDG Spec

env = XDG_CURRENT_DESKTOP,$env.XDG_CURRENT_DESKTOP
env = XDG_SESSION_TYPE,$env.XDG_SESSION_TYPE
env = XDG_SESSION_DESKTOP,$env.XDG_SESSION_DESKTOP

HyDE Variables

$hyde.PATH=$HOME/.local/bin:$scrPath:$env.PATH:$PATH
env = PATH,$hyde.PATH

XDG-ENV

env = XDG_CONFIG_HOME,$env.XDG_CONFIG_HOME
env = XDG_CACHE_HOME,$env.XDG_CACHE_HOME
env = XDG_DATA_HOME,$env.XDG_DATA_HOME

HyDE-ENV

env = HYDE_RUNTIME_DIR,$env.XDG_RUNTIME_DIR/hyde
env = HYDE_CONFIG_HOME,$env.XDG_CONFIG_HOME/hyde
env = HYDE_CACHE_HOME,$env.XDG_CACHE_HOME/hyde
env = HYDE_DATA_HOME,$env.XDG_DATA_HOME/hyde
env = HYDE_STATE_HOME,$env.XDG_STATE_HOME/hyde

CURSOR ENV

env = HYPRCURSOR_THEME,$CURSOR_THEME

env = HYPRCURSOR_SIZE,$CURSOR_SIZE

env = XCURSOR_THEME,$CURSOR_THEME

env = XCURSOR_SIZE,$CURSOR_SIZE

Execute on reload

HyDE Preparation

$exec.mkdir = mkdir -p $env.XDG_RUNTIME_DIR/hyde $env.XDG_CACHE_HOME/hyde/wallbash $env.XDG_CONFIG_HOME/hyde $env.XDG_DATA_HOME/hyde $(dirname $env.XDG_DATA_HOME)/state/hyde # Create HyDE directories
$set.env = printf "\n_SHELL='$SHELL'\n_GDK_BACKEND='$env.GDK_BACKEND'\n_QT_QPA_PLATFORM='$env.QT_QPA_PLATFORM'\n_SDL_VIDEODRIVER='$env.SDL_VIDEODRIVER'\n_CLUTTER_BACKEND='$env.CLUTTER_BACKEND'\n_XDG_CURRENT_DESKTOP='$env.XDG_CURRENT_DESKTOP'\n_XDG_SESSION_TYPE='$env.XDG_SESSION_TYPE'\n_XDG_SESSION_DESKTOP='$env.XDG_SESSION_DESKTOP'\n_QT_AUTO_SCREEN_SCALE_FACTOR='$env.QT_AUTO_SCREEN_SCALE_FACTOR'\n_QT_WAYLAND_DISABLE_WINDOWDECORATION='$env.QT_WAYLAND_DISABLE_WINDOWDECORATION'\n_QT_QPA_PLATFORMTHEME='$env.QT_QPA_PLATFORMTHEME'\n_HYDE_PATH='$hyde.PATH'\n_MOZ_ENABLE_WAYLAND='$env.MOZ_ENABLE_WAYLAND'\n_GDK_SCALE='$env.GDK_SCALE'\n_ELECTRON_OZONE_PLATFORM_HINT='$env.ELECTRON_OZONE_PLATFORM_HINT'\n_XDG_RUNTIME_DIR='$env.XDG_RUNTIME_DIR'\n_XDG_CONFIG_HOME='$env.XDG_CONFIG_HOME'\n_XDG_CACHE_HOME='$env.XDG_CACHE_HOME'\n_XDG_DATA_HOME='$env.XDG_DATA_HOME'\n_GTK_THEME='$GTK_THEME'\n_ICON_THEME='$ICON_THEME'\n_COLOR_SCHEME='$COLOR_SCHEME'\n_CURSOR_SIZE='$CURSOR_SIZE'\n_CURSOR_THEME='$CURSOR_THEME'\n_FONT='$FONT'\n_FONT_SIZE='$FONT_SIZE'\n_DOCUMENT_FONT='$DOCUMENT_FONT'\n_DOCUMENT_FONT_SIZE='$DOCUMENT_FONT_SIZE'\n_MONOSPACE_FONT='$MONOSPACE_FONT'\n_MONOSPACE_FONT_SIZE='$MONOSPACE_FONT_SIZE'\n_FONT_ANTIALIASING='$FONT_ANTIALIASING'\n_FONT_HINTING='$FONT_HINTING'\n_HYDE_RUNTIME_DIR='$env.XDG_RUNTIME_DIR/hyde'\n_HYDE_CONFIG_HOME='$env.XDG_CONFIG_HOME/hyde'\n_HYDE_CACHE_HOME='$env.XDG_CACHE_HOME/hyde'\n_HYDE_DATA_HOME='$env.XDG_DATA_HOME/hyde'\n_HYDE_STATE_HOME='$(dirname $env.XDG_DATA_HOME)/state/hyde'\nexport _TERMINAL='$(which $TERMINAL)'\nexport _LOCKSCREEN='$LOCKSCREEN'" > "$env.XDG_RUNTIME_DIR/hyde/environment"

Create a dconf file that will be loaded later one time, better than multiple dconf commands and better than gsettings

$dconFile=$env.XDG_CACHE_HOME/hyde/dconf
$dConf = \n[org/gnome/desktop/interface]\n
$dConf = $dConf icon-theme='$ICON_THEME'\n
$dConf = $dConf gtk-theme='$GTK_THEME'\n
$dConf = $dConf color-scheme='$COLOR_SCHEME'\n
$dConf = $dConf cursor-theme='$CURSOR_THEME'\n
$dConf = $dConf cursor-size=$CURSOR_SIZE\n
$dConf = $dConf font-name='$FONT $FONT_SIZE'\n
$dConf = $dConf document-font-name='$DOCUMENT_FONT $DOCUMENT_FONT_SIZE'\n
$dConf = $dConf monospace-font-name='$MONOSPACE_FONT $MONOSPACE_FONT_SIZE'\n
$dConf = $dConf font-antialiasing='$FONT_ANTIALIASING'\n
$dConf = $dConf font-hinting='$FONT_HINTING'\n
$dConf = $dConf [org/gnome/desktop/default-applications/terminal]\nexec='$(which $TERMINAL)'
$dConf = $dConf \n[org/gnome/desktop/wm/preferences]\nbutton-layout='$BUTTON_LAYOUT'\n
$dconf.preserve = dconf dump / > $dconFile
$dconf.populate = printf "$dConf" >> $dconFile
$dconf.reset = dconf reset -f / < $dconFile #! Use this as dconf update won't refresh when key-val is the same
$dconf.load = dconf load -f / < $dconFile

$dconf.update = dconf update

$set.hyprCursor = hyprctl setcursor $CURSOR_THEME $CURSOR_SIZE

$exec.dConf = ( $dconf.populate && $dconf.load && $dconf.update && $set.hyprCursor )

$exec.dConf = ( $dconf.preserve && $dconf.populate && $dconf.reset && $dconf.load && $set.hyprCursor )

$exec.keybinds_hint = $scrPath/keybinds.hint.py --format rofi > $env.XDG_RUNTIME_DIR/hyde/keybinds_hint.rofi

Execute

exec = $exec.dConf
exec = $exec.mkdir & $set.env & $exec.animation & $exec.keybinds_hint

// █░░ ▄▀█ █░█ █▄░█ █▀▀ █░█

// █▄▄ █▀█ █▄█ █░▀█ █▄▄ █▀█

exec-once = uwsm app -- $start.XDG_PORTAL_RESET || $start.XDG_PORTAL_RESET # resetxdgportal.sh (one-time setup)
exec-once = uwsm app -- $start.DBUS_SHARE_PICKER || $start.DBUS_SHARE_PICKER # dbus-update-activation-environment (one-time setup)
exec-once = uwsm app -- $start.SYSTEMD_SHARE_PICKER || $start.SYSTEMD_SHARE_PICKER # systemctl --user import-environment (one-time setup)
exec-once = uwsm app -t service -s s -- $start.BAR || $start.BAR # waybar.py --watch (daemon)
exec-once = uwsm app -t service -s s -- $start.NOTIFICATIONS || $start.NOTIFICATIONS # dunst (daemon)
exec-once = uwsm app -t service -s a -- $start.APPTRAY_BLUETOOTH || $start.APPTRAY_BLUETOOTH # blueman-applet (system tray)
exec-once = uwsm app -t service -s b -- $start.WALLPAPER || $start.WALLPAPER # wallpaper.sh --global (daemon)
exec-once = uwsm app -t service -s s -- $start.TEXT_CLIPBOARD || $start.TEXT_CLIPBOARD # wl-paste --watch (daemon)
exec-once = uwsm app -t service -s s -- $start.IMAGE_CLIPBOARD || $start.IMAGE_CLIPBOARD # wl-paste --watch (daemon)
exec-once = uwsm app -t service -s s -- $start.CLIPBOARD_PERSIST || $start.CLIPBOARD_PERSIST # wl-clip-persist (daemon)
exec-once = uwsm app -t service -s a -- $start.BATTERY_NOTIFY || $start.BATTERY_NOTIFY # batterynotify.sh (monitoring daemon)
exec-once = uwsm app -t service -s a -- $start.NETWORK_MANAGER || $start.NETWORK_MANAGER # nm-applet (system tray)
exec-once = uwsm app -t service -s a -- $start.REMOVABLE_MEDIA || $start.REMOVABLE_MEDIA # udiskie (daemon)
exec-once = uwsm app -t service -s s -- $start.AUTH_DIALOGUE || $start.AUTH_DIALOGUE # polkitkdeauth.sh (authentication agent)
exec-once = uwsm app -t service -s s -- $start.IDLE_DAEMON || $start.IDLE_DAEMON # hypridle (daemon)

hyde/config.toml is parsed and exported to the environment

exec-once = $scrPath/parse.config.py --daemon --input $env.XDG_CONFIG_HOME/hyde/config.toml --env $env.XDG_STATE_HOME/hyde/config --hypr $env.XDG_STATE_HOME/hyde/hyprland.conf

exec-once = systemctl --user start hyde-config.service #! If this is not working try the command above!

#? Rules can be added here as most of the configuration are dynamic

// █░█░█ █ █▄░█ █▀▄ █▀█ █░█░█   █▀█ █░█ █░░ █▀▀ █▀

// ▀▄▀▄▀ █ █░▀█ █▄▀ █▄█ ▀▄▀▄▀   █▀▄ █▄█ █▄▄ ██▄ ▄█

See https://wiki.hyprland.org/Configuring/Window-Rules/

Ony add the Core applications here

windowrule = float,class:^(com.gabm.satty)$
windowrule = float,class:^(org.kde.dolphin)$,title:^(Progress Dialog — Dolphin)$
windowrule = float,class:^(org.kde.dolphin)$,title:^(Copying — Dolphin)$
windowrule = float,title:^(About Mozilla Firefox)$
windowrule = float,class:^(firefox)$,title:^(Picture-in-Picture)$
windowrule = float,class:^(firefox)$,title:^(Library)$
windowrule = float,class:^(.)$,initialTitle:^(top)$
windowrule = float,class:^(.)$,initialTitle:^(btop)$
windowrule = float,class:^(.*)$,initialTitle:^(htop)$
windowrule = float,class:^(vlc)$
windowrule = float,class:^(kvantummanager)$
windowrule = float,class:^(qt5ct)$
windowrule = float,class:^(qt6ct)$
windowrule = float,class:^(nwg-look)$
windowrule = float,class:^(nwg-displays)$
windowrule = float,class:^(org.kde.ark)$
windowrule = float,class:^(org.pulseaudio.pavucontrol)$
windowrule = float,class:^(blueman-manager)$
windowrule = float,class:^(nm-applet)$
windowrule = float,class:^(nm-connection-editor)$
windowrule = float,class:^(org.kde.polkit-kde-authentication-agent-1)$
windowrule = float,class:^([Xx]dg-desktop-portal-gtk)$

// █░░ ▄▀█ █▄█ █▀▀ █▀█   █▀█ █░█ █░░ █▀▀ █▀

// █▄▄ █▀█ ░█░ ██▄ █▀▄   █▀▄ █▄█ █▄▄ ██▄ ▄█

layerrule = blur,rofi
layerrule = ignorezero,rofi
layerrule = blur,notifications
layerrule = ignorezero,notifications
layerrule = blur,swaync-notification-window
layerrule = ignorezero,swaync-notification-window
layerrule = blur,swaync-control-center
layerrule = ignorezero,swaync-control-center
layerrule = blur,logout_dialog

Config File: /home/oz/.config/hypr/themes/colors.conf: Read Succeeded

Autogenerated colors by wallbash

This can be sourced in by any hyprlang configuration file

Color group 1

$wallbash_pry1 = 120215 # primary color 1
$wallbash_txt1 = FFFFFF # text color 1
$wallbash_1xa1 = 4B2952 # accent color 1 for primary color 1
$wallbash_1xa2 = 633A6B # accent color 2 for primary color 1
$wallbash_1xa3 = 754B7D # accent color 3 for primary color 1
$wallbash_1xa4 = 86578F # accent color 4 for primary color 1
$wallbash_1xa5 = 9965A3 # accent color 5 for primary color 1
$wallbash_1xa6 = B67AC2 # accent color 6 for primary color 1
$wallbash_1xa7 = DA9AE6 # accent color 7 for primary color 1
$wallbash_1xa8 = E5AAF0 # accent color 8 for primary color 1
$wallbash_1xa9 = F7CCFF # accent color 9 for primary color 1

in rgba format

$wallbash_pry1_rgba = rgba(18,2,21,0.95) # primary color 1
$wallbash_txt1_rgba = rgba(255,255,255,0.95) # text color 1
$wallbash_1xa1_rgba = rgba(75,41,82,0.95) # accent color 1 for primary color 1
$wallbash_1xa2_rgba = rgba(99,58,107,0.95) # accent color 2 for primary color 1
$wallbash_1xa3_rgba = rgba(117,75,125,0.95) # accent color 3 for primary color 1
$wallbash_1xa4_rgba = rgba(134,87,143,0.95) # accent color 4 for primary color 1
$wallbash_1xa5_rgba = rgba(153,101,163,0.95) # accent color 5 for primary color 1
$wallbash_1xa6_rgba = rgba(182,122,194,0.95) # accent color 6 for primary color 1
$wallbash_1xa7_rgba = rgba(218,154,230,0.95) # accent color 7 for primary color 1
$wallbash_1xa8_rgba = rgba(229,170,240,0.95) # accent color 8 for primary color 1
$wallbash_1xa9_rgba = rgba(247,204,255,0.95) # accent color 9 for primary color 1

Color group 2

$wallbash_pry2 = 540E61 # primary color 2
$wallbash_txt2 = FFFFFF # text color 2
$wallbash_2xa1 = 4B2952 # accent color 1 for primary color 2
$wallbash_2xa2 = 633A6B # accent color 2 for primary color 2
$wallbash_2xa3 = 754B7D # accent color 3 for primary color 2
$wallbash_2xa4 = 86578F # accent color 4 for primary color 2
$wallbash_2xa5 = 9965A3 # accent color 5 for primary color 2
$wallbash_2xa6 = B77AC2 # accent color 6 for primary color 2
$wallbash_2xa7 = DA9AE6 # accent color 7 for primary color 2
$wallbash_2xa8 = E5AAF0 # accent color 8 for primary color 2
$wallbash_2xa9 = F7CCFF # accent color 9 for primary color 2

in rgba format

$wallbash_pry2_rgba = rgba(84,14,97,0.95) # primary color 2
$wallbash_txt2_rgba = rgba(255,255,255,0.95) # text color 2
$wallbash_2xa1_rgba = rgba(75,41,82,0.95) # accent color 1 for primary color 2
$wallbash_2xa2_rgba = rgba(99,58,107,0.95) # accent color 2 for primary color 2
$wallbash_2xa3_rgba = rgba(117,75,125,0.95) # accent color 3 for primary color 2
$wallbash_2xa4_rgba = rgba(134,87,143,0.95) # accent color 4 for primary color 2
$wallbash_2xa5_rgba = rgba(153,101,163,0.95) # accent color 5 for primary color 2
$wallbash_2xa6_rgba = rgba(183,122,194,0.95) # accent color 6 for primary color 2
$wallbash_2xa7_rgba = rgba(218,154,230,0.95) # accent color 7 for primary color 2
$wallbash_2xa8_rgba = rgba(229,170,240,0.95) # accent color 8 for primary color 2
$wallbash_2xa9_rgba = rgba(247,204,255,0.95) # accent color 9 for primary color 2

Color group 3

$wallbash_pry3 = 7A75CD # primary color 3
$wallbash_txt3 = B4B4AD # text color 3
$wallbash_3xa1 = 2B2952 # accent color 1 for primary color 3
$wallbash_3xa2 = 3D3A6B # accent color 2 for primary color 3
$wallbash_3xa3 = 4E4B7D # accent color 3 for primary color 3
$wallbash_3xa4 = 5A578F # accent color 4 for primary color 3
$wallbash_3xa5 = 6965A3 # accent color 5 for primary color 3
$wallbash_3xa6 = 7E7AC2 # accent color 6 for primary color 3
$wallbash_3xa7 = 9E9AE6 # accent color 7 for primary color 3
$wallbash_3xa8 = AEAAF0 # accent color 8 for primary color 3
$wallbash_3xa9 = CFCCFF # accent color 9 for primary color 3

in rgba format

$wallbash_pry3_rgba = rgba(122,117,205,0.95) # primary color 3
$wallbash_txt3_rgba = rgba(180,180,173,0.95) # text color 3
$wallbash_3xa1_rgba = rgba(43,41,82,0.95) # accent color 1 for primary color 3
$wallbash_3xa2_rgba = rgba(61,58,107,0.95) # accent color 2 for primary color 3
$wallbash_3xa3_rgba = rgba(78,75,125,0.95) # accent color 3 for primary color 3
$wallbash_3xa4_rgba = rgba(90,87,143,0.95) # accent color 4 for primary color 3
$wallbash_3xa5_rgba = rgba(105,101,163,0.95) # accent color 5 for primary color 3
$wallbash_3xa6_rgba = rgba(126,122,194,0.95) # accent color 6 for primary color 3
$wallbash_3xa7_rgba = rgba(158,154,230,0.95) # accent color 7 for primary color 3
$wallbash_3xa8_rgba = rgba(174,170,240,0.95) # accent color 8 for primary color 3
$wallbash_3xa9_rgba = rgba(207,204,255,0.95) # accent color 9 for primary color 3

Color group 4

$wallbash_pry4 = D76F53 # primary color 4
$wallbash_txt4 = 101212 # text color 4
$wallbash_4xa1 = 523129 # accent color 1 for primary color 4
$wallbash_4xa2 = 6B443A # accent color 2 for primary color 4
$wallbash_4xa3 = 7D564B # accent color 3 for primary color 4
$wallbash_4xa4 = 8F6357 # accent color 4 for primary color 4
$wallbash_4xa5 = A37265 # accent color 5 for primary color 4
$wallbash_4xa6 = C2897A # accent color 6 for primary color 4
$wallbash_4xa7 = E6AA9A # accent color 7 for primary color 4
$wallbash_4xa8 = F0B9AA # accent color 8 for primary color 4
$wallbash_4xa9 = FFD7CC # accent color 9 for primary color 4

in rgba format

$wallbash_pry4_rgba = rgba(215,111,83,0.95) # primary color 4
$wallbash_txt4_rgba = rgba(16,18,18,0.95) # text color 4
$wallbash_4xa1_rgba = rgba(82,49,41,0.95) # accent color 1 for primary color 4
$wallbash_4xa2_rgba = rgba(107,68,58,0.95) # accent color 2 for primary color 4
$wallbash_4xa3_rgba = rgba(125,86,75,0.95) # accent color 3 for primary color 4
$wallbash_4xa4_rgba = rgba(143,99,87,0.95) # accent color 4 for primary color 4
$wallbash_4xa5_rgba = rgba(163,114,101,0.95) # accent color 5 for primary color 4
$wallbash_4xa6_rgba = rgba(194,137,122,0.95) # accent color 6 for primary color 4
$wallbash_4xa7_rgba = rgba(230,170,154,0.95) # accent color 7 for primary color 4
$wallbash_4xa8_rgba = rgba(240,185,170,0.95) # accent color 8 for primary color 4
$wallbash_4xa9_rgba = rgba(255,215,204,0.95) # accent color 9 for primary color 4

Config File: /home/oz/.config/hypr/themes/theme.conf: Read Succeeded

$GTK_THEME = Sweet-Dark
$ICON_THEME = candy-icons
$COLOR_SCHEME=prefer-dark
$CURSOR_THEME = Sweet-cursors
$CURSOR_SIZE=20
$CODE_THEME=Modern Purple Theme Dark

general {
gaps_in = 3
gaps_out = 8
border_size = 2
col.active_border = rgba(c74dedff) rgba(ed254eff) 45deg
col.inactive_border = rgba(00c1e4cc) rgba(7cb7ffcc) 45deg
layout = dwindle
resize_on_border = true
}

group {
col.border_active = rgba(c74dedff) rgba(ed254eff) 45deg
col.border_inactive = rgba(00c1e4cc) rgba(7cb7ffcc) 45deg
col.border_locked_active = rgba(c74dedff) rgba(ed254eff) 45deg
col.border_locked_inactive = rgba(00c1e4cc) rgba(7cb7ffcc) 45deg
}

decoration {
rounding = 10

blur {
    enabled = yes
    size = 6
    passes = 3
    new_optimizations = on
    ignore_opacity = on
    xray = false
}

shadow {
    enabled = false
}

}

Config File: /home/oz/.config/hypr/themes/wallbash.conf: Read Succeeded

Auto-generated by HyDE // Read-only

// ----------------------------

HyDE Theme: Paranoid Sweet

Configuration File: "/home/oz/.config/hyde/themes/Paranoid Sweet/hypr.theme"

Wallbash Mode : theme

// ----------------------------

$HYDE_THEME=Paranoid Sweet
$GTK_THEME=Sweet-Dark
$COLOR-SCHEME=prefer-dark
$ICON_THEME=candy-icons

$CURSOR_THEME=Sweet-cursors
$CURSOR_SIZE=20

$FONT=Cantarell
$FONT_SIZE=10
$DOCUMENT_FONT=Cantarell
$DOCUMENT_FONT_SIZE=10
$MONOSPACE_FONT=CaskaydiaCove Nerd Font Mono
$MONOSPACE_FONT_SIZE=9

$CODE_THEME=Modern Purple Theme Dark
$SDDM_THEME=

// ----------------------------

README:

Values above are derived and sanitized from the theme.conf file,

This is to ensure themes won't have any 'exec' or 'source'

commands that could potentially harm the system

or undesired behavior.

Dear Theme Owner:

You can still add your own custom 'exec' or 'source' commands

by adding it as variable, examples (you can name the variable anything):

Note that you should indicate it in your README.md

-- ⌨️ theme.conf --

$RUN_CMD="some_command"

$SOURCE_FILE="/some/files"

-- ⌨️ userprefs.conf --

exec = ${RUN_CMD}"

source = ${SOURCE_FILE}

exec = hyde-shell walbash code $CODE_THEME # Setting the code theme

// ----------------------------

Config File: /home/oz/.config/hypr/animations.conf: Read Succeeded

#! ▄▀█ █▄░█ █ █▀▄▀█ ▄▀█ ▀█▀ █ █▀█ █▄░█
#! █▀█ █░▀█ █ █░▀░█ █▀█ ░█░ █ █▄█ █░▀█

#*┌────────────────────────────────────────────────────────────────────────────┐
#*│ # See https://wiki.hyprland.org/Configuring/Animations/ │
#*│ # HyDE Controlled content // DO NOT EDIT │
#*│ # Edit or add animations in the ./hypr/animations/ directory │
#*│ # and run the 'animations.sh --select' command to update this file │
#*│ │
#*└────────────────────────────────────────────────────────────────────────────┘

$ANIMATION=theme
$ANIMATION_PATH=./animations/theme.conf
source = $ANIMATION_PATH

Config File: /home/oz/.config/hypr/animations/theme.conf: Read Succeeded

This file is generated by wallbash:animations.dcol

// ▄▀█ █▄░█ █ █▀▄▀█ ▄▀█ ▀█▀ █ █▀█ █▄░█

// █▀█ █░▀█ █ █░▀░█ █▀█ ░█░ █ █▄█ █░▀█

See https://wiki.hyprland.org/Configuring/Animations/

credits: https://github.com/prasanthrangan/hyprdots

animations {
enabled = yes
bezier = wind, 0.05, 0.9, 0.1, 1.05
bezier = winIn, 0.1, 1.1, 0.1, 1.1
bezier = winOut, 0.3, -0.3, 0, 1
bezier = liner, 1, 1, 1, 1
animation = windows, 1, 6, wind, slide
animation = windowsIn, 1, 6, winIn, slide
animation = windowsOut, 1, 5, winOut, slide
animation = windowsMove, 1, 5, wind, slide
animation = border, 1, 1, liner
animation = borderangle, 1, 30, liner, once
animation = fade, 1, 10, default
animation = workspaces, 1, 5, wind
}

Config File: /home/oz/.config/hypr/shaders.conf: Read Succeeded

#! █▀ █░█ ▄▀█ █▀▄ █▀▀ █▀█ █▀
#! ▄█ █▀█ █▀█ █▄▀ ██▄ █▀▄ ▄█

*┌────────────────────────────────────────────────────────────────────────────┐

*│ |

*│ HyDE Controlled content DO NOT EDIT! |

*│ Edit or add shaders in the ./shaders/ directory |

*│ and run the 'shaders.sh --select' command to update this file |

*│ Modify ./shaders/user-defines.frag to add your own custom defines |

*│ The 'shader.sh' script will automatically copy this file to the cache |

*│ and the cache will be used in the shader |

*│ |

*└────────────────────────────────────────────────────────────────────────────┘

name of the shader

$SCREEN_SHADER = "vibrance"

path to the shader

$SCREEN_SHADER_PATH = "/home/oz/.config/hypr/shaders/vibrance.frag"

path to the compiled shader // override this in '../hyde/config.toml'

$SCREEN_SHADER_COMPILED = ./shaders/.compiled.cache.glsl

Config File: /home/oz/.config/hypr/hyde.conf: Read Succeeded
#!   ░▒▒▒░░░▓▓          ___________
#! ░░▒▒▒░░░░░▓▓        //__________/
#! ░░▒▒▒░░░░░▓▓     _   _ _    _ _____
#! ░░▒▒░░░░░▓▓▓▓▓▓ | | | | |  | |  /
#! ░▒▒░░░░▓▓   ▓▓ | || | |/ /| |
#!  ░▒▒░░▓▓   ▓▓   __  |/ |/
#!    ░▒▓▓   ▓▓  //____/

Use this for reference to override the default HyDE' hyprland configuration

! Never source ~/.config/hypr/hyde.conf directly, it is sourced by the main configuration file

This file acts as an override configuration for the user to set their environment variables and startup commands

Static variable declaration in hyde.conf will be prioritized over the default and dynamic configuration

 NOTE 

Leaving the variable empty will unset the variable

Commenting out the variable will use the default value

For updated configuration options, see https://github.com/HyDE-Project/HyDE/blob/master/Configs/.config/hypr/hyde.conf

For simplicity, ./hyde.conf ONLY accepts $ for variables and # for comments, will sanitize the file to remove any other characters

$start.VAR , $env.VAR are ONLY HyDE specific conventions for consistency.

Keyboard modifier

$mainMod = SUPER # windows key

▄▀█ █▀█ █▀█ █▀

█▀█ █▀▀ █▀▀ ▄█

$QUICKAPPS = # used for quick app launcher

$BROWSER = vivaldi # default browser, if commented out , will use the default browser

$EDITOR = code # default editor, if commented out , will use the default editor

$EXPLORER= dolphin # default file manager, if commented out , will use the default file manager

$TERMINAL = kitty # default terminal, if commented out , will use the org.gnome.desktop.default-applications.terminal

$LOCKSCREEN=hyprlock # default lockscreen, you can use any lockscreen you want, eg swaylock

$IDLE=hypridle # default idle manager, you can use any idle manager you want,eg swayidle

// █░░ ▄▀█ █░█ █▄░█ █▀▀ █░█

// █▄▄ █▀█ █▄█ █░▀█ █▄▄ █▀█

See https://wiki.hyprland.org/Configuring/Keywords/

Override the default startup commands

$start.XDG_PORTAL_RESET=$scrPath/resetxdgportal.sh

$start.DBUS_SHARE_PICKER=dbus-update-activation-environment --systemd --all # for XDPH

$start.SYSTEMD_SHARE_PICKER=systemctl --user import-environment QT_QPA_PLATFORMTHEME WAYLAND_DISPLAY XDG_CURRENT_DESKTOP # for XDPH

$start.BAR=waybar

$start.NOTIFICATIONS=swaync # dunst

$start.APPTRAY_BLUETOOTH=blueman-applet

$start.WALLPAPER=$scrPath/swwwallpaper.sh

$start.TEXT_CLIPBOARD=wl-paste --type text --watch cliphist store

$start.IMAGE_CLIPBOARD=wl-paste --type image --watch cliphist store

$start.BATTERY_NOTIFY=$scrPath/batterynotify.sh

$start.NETWORK_MANAGER=nm-applet --indicator

$start.REMOVABLE_MEDIA=udiskie --no-automount --smart-tray

$start.AUTH_DIALOGUE=$scrPath/polkitkdeauth.sh

$start.IDLE_DAEMON=$IDLE

// █▀▀ █▄░█ █░█

// ██▄ █░▀█ ▀▄▀

See https://wiki.hyprland.org/Configuring/Environment-variables/

Override the default environment variables

# Toolkit Backend Variables - https://wiki.hyprland.org/Configuring/Environment-variables/#toolkit-backend-variables

$env.GDK_BACKEND = wayland,x11,* #s GTK: Use wayland if available. If not: try x11, then any other GDK backend.

# $env.QT_QPA_PLATFORM = wayland;xcb #Qt: Use wayland if available, fall back to x11 if not.

$env.SDL_VIDEODRIVER = wayland #s Run SDL2 applications on Wayland. Remove or set to x11 if games that provide older versions of SDL cause compatibility issues

$env.CLUTTER_BACKEND = wayland #s Clutter package already has wayland enabled, this variable will force Clutter applications to try and use the Wayland backend

# XDG Specifications - https://wiki.hyprland.org/Configuring/Environment-variables/#xdg-specifications

$env.XDG_CURRENT_DESKTOP = Hyprland

$env.XDG_SESSION_TYPE = wayland

$env.XDG_SESSION_DESKTOP = Hyprland

# Qt Variables - https://wiki.hyprland.org/Configuring/Environment-variables/#qt-variables

$env.QT_AUTO_SCREEN_SCALE_FACTOR = 1 # (From the Qt documentation) enables automatic scaling, based on the monitor’s pixel density

$env.QT_QPA_PLATFORM=wayland;xcb # Tell Qt applications to use the Wayland backend, and fall back to x11 if Wayland is unavailable

$env.QT_WAYLAND_DISABLE_WINDOWDECORATION = 1 # Disables window decorations on Qt applications

$env.QT_QPA_PLATFORMTHEME = qt6ct # Tells Qt based applications to pick your theme from qt5ct, use with Kvantum.

# HyDE Environment Variables -

$env.PATH =

$env.MOZ_ENABLE_WAYLAND=1 # Enable Wayland for Firefox

$env.GDK_SCALE=1 # Set GDK scale to 1 // For Xwayland on HiDPI

$env.ELECTRON_OZONE_PLATFORM_HINT=auto # Set Electron Ozone Platform Hint to auto // For Electron apps on Wayland

# XDG-DIRS

$env.XDG_RUNTIME_DIR=$XDG_RUNTIME_DIR

$env.XDG_CONFIG_HOME=$HOME/.config

$env.XDG_CACHE_HOME=$HOME/.cache

$env.XDG_DATA_HOME=$HOME/.local/share

These variable will override the default and the theme configuration

Do not uncomment the variables if you want HyDE to do the theme configuration for you

// █▀▀ ▀█▀ █▄▀

// █▄█ ░█░ █░█

#$GTK_THEME=Wallbash-Gtk
#$ICON_THEME=Tela-circle-dracula
#$COLOR_SCHEME=prefer-dark

// █▀▀ █░█ █▀█ █▀ █▀█ █▀█

// █▄▄ █▄█ █▀▄ ▄█ █▄█ █▀▄

#$CURSOR_THEME=Bibata-Modern-Ice
#$CURSOR_SIZE=24

// █▀▀ █▀█ █▄░█ ▀█▀

// █▀░ █▄█ █░▀█ ░█░

#$FONT=Canterell
#$FONT_SIZE=10
#$DOCUMENT_FONT=Cantarell
#$DOCUMENT_FONT_SIZE=10
#$MONOSPACE_FONT=CaskaydiaCove Nerd Font Mono
#$MONOSPACE_FONT_SIZE=9
#$FONT_ANTIALIASING=rgba
#$FONT_HINTING=full

// █░░ █▀█ █▀▀ █▄▀ █▀ █▀▀ █▀█ █▀▀ █▀▀ █▄░█

// █▄▄ █▄█ █▄▄ █░█ ▄█ █▄▄ █▀▄ ██▄ ██▄ █░▀█

#Setting the Hyprlock layout will override any layout set in the ./hypr/hyprlock.sh

Dynamic Hyprlock layout should be set in the ./hypr/hyprlock.sh file

$LAYOUT_PATH=/path/to/hyprlock/layout.conf

Config File: /home/oz/.local/state/hyde/hyprland.conf: Read Succeeded

This is an autogenerated file

converted [hyprland*] from config.toml

Config File: /home/oz/.config/hypr/keybindings.conf: Read Succeeded

█▄▀ █▀▀ █▄█ █▄▄ █ █▄░█ █▀▄ █ █▄░█ █▀▀ █▀

█░█ ██▄ ░█░ █▄█ █ █░▀█ █▄▀ █ █░▀█ █▄█ ▄█

see https://wiki.hyprland.org/configuring/keywords/ for more

example binds, see https://wiki.hyprland.org/configuring/binds/ for more

Grouping of binds for easier management

$d=[Group Name|Subgroup Name1|Subgroup Name2|...]

'$d' is a variable that is used to group binds together (or use another variable)

This is only for organization purposes and is not a defined hyprland variable

What we did here is to modify the Description of the binds to include the group name

The $d will be parsed as a separate key to be use for a GUI or something pretty

[Main|Subgroup1|Subgroup2|...]

Main - The main groupname

Subgroup1.. - The subgroup names can be use to avoid repeating the same description

#*  Variables 

Default if commented out

$mainMod = Super # super / meta / windows key

Assign apps

$TERMINAL = kitty

$EDITOR = code

$EXPLORER = dolphin

$BROWSER = vivaldi

$wm=Window Management
$d=[$wm]
bindd = $mainMod, Delete, $d close focused window, exec, $scrPath/dontkillsteam.sh
bindd = Alt, F4, $d close focused window, exec, $scrPath/dontkillsteam.sh
bindd = $mainMod, Esc, $d kill hyprland session, exit
bindd = $mainMod, W, $d Toggle floating, exec, hyprctl --batch "dispatch togglefloating; dispatch resizeactive exact 95% 95%; dispatch centerwindow"
bindd = $mainMod, G, $d toggle group, togglegroup
bindd = Shift, F11, $d toggle fullscreen, fullscreen
bindd = $mainMod, M, $d lock screen, exec, lockscreen.sh
bindd = $mainMod Shift, F, $d toggle pin on focused window, exec, $scrPath/windowpin.sh
bindd = Control Alt, Delete, $d logout menu, exec, $scrPath/logoutlaunch.sh
bindd = Alt_R, Control_R, $d toggle waybar and reload config, exec, hyde-shell waybar --hide
bindd = ALT_R, Control_R,toggle waybar, exec, killall waybar || waybar # toggle waybar without reloading, this is faster

$d=[$wm|Group Navigation]
bindd = $mainMod Control, H, $d change active group backwards , changegroupactive, b
bindd = $mainMod Control, L, $d change active group forwards , changegroupactive, f

$d=[$wm|Change focus]
bindd = $mainMod, h, $d focus left, movefocus, l
bindd = $mainMod, l, $d focus right , movefocus, r
bindd = $mainMod, k, $d focus up , movefocus, u
bindd = $mainMod, j, $d focus down, movefocus, d
bindd = ALT, Tab,$d Cycle focus, cyclenext

$d=[$wm|Resize Active Window]

Resize windows

bindde = $mainMod Shift, l, $d resize window right , resizeactive, 30 0
bindde = $mainMod Shift, h, $d resize window left, resizeactive, -30 0
bindde = $mainMod Shift, k, $d resize window up, resizeactive, 0 -30
bindde = $mainMod Shift, j, $d resize window down, resizeactive, 0 30

Move active window around current workspace with mainMod + Shift + Control [←→↑↓]

$d=[$wm|Move active window across workspace]
$moveactivewindow=grep -q "true" &lt;&lt;&lt; $(hyprctl activewindow -j | jq -r .floating) && hyprctl dispatch moveactive
bindde = $mainMod Shift Control, h, Move active window to the left, exec, $moveactivewindow -30 0 || hyprctl dispatch movewindow l
bindde = $mainMod Shift Control, l, Move active window to the right, exec, $moveactivewindow 30 0 || hyprctl dispatch movewindow r
bindde = $mainMod Shift Control, k, Move active window up, exec, $moveactivewindow 0 -30 || hyprctl dispatch movewindow u
bindde = $mainMod Shift Control, j, Move active window down, exec, $moveactivewindow 0 30 || hyprctl dispatch movewindow d

Move/Resize focused window

$d=[$wm|Move & Resize with mouse]
binddm = $mainMod, mouse:272, $d hold to move window, movewindow
binddm = $mainMod, mouse:273, $d hold to resize window, resizewindow
binddm = $mainMod, Z, $d hold to move window , movewindow
binddm = $mainMod, X, $d hold to resize window, resizewindow

Toggle focused window split

$d=[$wm]
bindd = $mainMod Shift, J, $d toggle split, togglesplit

$l=Launcher
$d=[$l|Apps]
bindd = $mainMod, T, $d terminal emulator , exec, $TERMINAL
bindd = $mainMod Alt, T, $d dropdown terminal , exec, [float; move 20% 5%; size 60% 60%] $TERMINAL
bindd = $mainMod, E, $d file explorer , exec, $EXPLORER
bindd = $mainMod, C, $d text editor , exec, $EDITOR
bindd = $mainMod, B, $d web browser , exec, $BROWSER
bindd = Control Shift, Escape, $d system monitor , exec, $scrPath/sysmonlaunch.sh

$d=[$l|Rofi menus]
$rofi-launch=$scrPath/rofilaunch.sh
bindd = $mainMod, A, $d application finder , exec, pkill -x rofi || $rofi-launch d
bindd = $mainMod, TAB, $d window switcher , exec, pkill -x rofi || $rofi-launch w
bindd = $mainMod Shift, E, $d file finder , exec, pkill -x rofi || $rofi-launch f
bindd = $mainMod, slash, $d keybindings hint, exec, pkill -x rofi || $scrPath/keybinds_hint.sh c # launch keybinds hint
bindd = $mainMod, comma, $d emoji picker , exec, pkill -x rofi || $scrPath/emoji-picker.sh # launch emoji picker
bindd = $mainMod, period, $d glyph picker , exec, pkill -x rofi || $scrPath/glyph-picker.sh # launch glyph picker
bindd = $mainMod, V, $d clipboard , exec, pkill -x rofi || $scrPath/cliphist.sh -c # launch clipboard,
bindd = $mainMod Shift, V, $d clipboard manager , exec, pkill -x rofi || $scrPath/cliphist.sh # launch clipboard Manager
bindd = $mainMod Shift, A, $d select rofi launcher , exec, pkill -x rofi || $scrPath/rofiselect.sh # launch select menu

$hc=Hardware Controls
$d=[$hc|Audio]
binddl = , F10, $d toggle mute output , exec, $scrPath/volumecontrol.sh -o m # toggle audio mute
binddl = , XF86AudioMute,$d toggle mute output, exec, $scrPath/volumecontrol.sh -o m # toggle audio mute
binddel = , F11, $d decrease volume , exec, $scrPath/volumecontrol.sh -o d # decrease volume
binddel = , F12, $d increase volume , exec, $scrPath/volumecontrol.sh -o i # increase volume
binddl = , XF86AudioMicMute,$d un/mute microphone , exec, $scrPath/volumecontrol.sh -i m # toggle microphone mute
binddel = , XF86AudioLowerVolume, $d decrease volume , exec, $scrPath/volumecontrol.sh -o d # decrease volume
binddel = , XF86AudioRaiseVolume, $d increase volume , exec, $scrPath/volumecontrol.sh -o i # increase volume

$d=[$hc|Media]
binddl = , XF86AudioPlay,$d play media, exec, playerctl play-pause # toggle between media play and pause
binddl = , XF86AudioPause,$d pause media, exec, playerctl play-pause # toggle between media play and pause
binddl = , XF86AudioNext,$d next media , exec, playerctl next # media next
binddl = , XF86AudioPrev,$d previous media , exec, playerctl previous # media previous

$d=[$hc|Brightness]
binddel = , XF86MonBrightnessUp, $d increase brightness , exec, $scrPath/brightnesscontrol.sh i # increase brightness
binddel = , XF86MonBrightnessDown, $d decrease brightness , exec, $scrPath/brightnesscontrol.sh d # decrease brightness

$ut=Utilities
$d=[$ut]
binddl = $mainMod Shift, K, $d toggle keyboard layout , exec, $scrPath/keyboardswitch.sh # switch keyboard layout
bindd = $mainMod Alt, G, $d game mode , exec, $scrPath/gamemode.sh # disable hypr effects for gamemode
bindd = $mainMod Shift, G, $d open game launcher , exec, $scrPath/gamelauncher.sh # run game launcher for steam and lutris

$d=[$ut|Screen Capture]
bindd = $mainMod Shift, P, $d color picker, exec, hyprpicker -an # Pick color (Hex) >> clipboard#
bindd = $mainMod, P, $d snip screen , exec, $scrPath/screenshot.sh s # partial screenshot capture
bindd = $mainMod Control, P, $d freeze and snip screen, exec, $scrPath/screenshot.sh sf # partial screenshot capture (frozen screen)
binddl = $mainMod Alt, P, $d print monitor , exec, $scrPath/screenshot.sh m # monitor screenshot capture
binddl = , Print, $d print all monitors , exec, $scrPath/screenshot.sh p # all monitors screenshot capture

TODO Make a main rofi menu for these selectors

$rice=Theming and Wallpaper
$d=[$rice]
bindd = $mainMod Alt, Right, $d next global wallpaper , exec, $scrPath/wallpaper.sh -Gn # next global wallpaper
bindd = $mainMod Alt, Left, $d previous global wallpaper , exec, $scrPath/wallpaper.sh -Gp # previous global wallpaper
bindd = $mainMod Shift, W, $d select a global wallpaper , exec, pkill -x rofi || $scrPath/wallpaper.sh -SG # launch wallpaper select menu
bindd = $mainMod Alt, Up, $d next waybar layout , exec, $scrPath/wbarconfgen.sh n # next waybar mode
bindd = $mainMod Alt, Down, $d previous waybar layout , exec, $scrPath/wbarconfgen.sh p # previous waybar mode
bindd = $mainMod Shift, R, $d wallbash mode selector , exec, pkill -x rofi || $scrPath/wallbashtoggle.sh -m # launch wallbash mode select menu
bindd = $mainMod Shift, T, $d select a theme, exec, pkill -x rofi || $scrPath/themeselect.sh # launch theme select menu
bindd = $mainMod+Shift, Y, $d select animations, exec, pkill -x rofi || $scrPath/animations.sh --select # launch animations select menu
bindd = $mainMod+Shift, U, $d select hyprlock layout, exec, pkill -x rofi || $scrPath/hyprlock.sh --select # launch hyprlock layout select menu

$ws=Workspaces
$d=[$ws|Navigation]
bindd = $mainMod, 1, $d navigate to workspace 1 , workspace, 1
bindd = $mainMod, 2, $d navigate to workspace 2 , workspace, 2
bindd = $mainMod, 3, $d navigate to workspace 3 , workspace, 3
bindd = $mainMod, 4, $d navigate to workspace 4 , workspace, 4
bindd = $mainMod, 5, $d navigate to workspace 5 , workspace, 5
bindd = $mainMod, 6, $d navigate to workspace 6 , workspace, 6
bindd = $mainMod, 7, $d navigate to workspace 7 , workspace, 7
bindd = $mainMod, 8, $d navigate to workspace 8 , workspace, 8
bindd = $mainMod, 9, $d navigate to workspace 9 , workspace, 9
bindd = $mainMod, 0, $d navigate to workspace 10 , workspace, 10

$d=[$ws|Navigation|Relative workspace]
bindd = $mainMod Control, l, $d change active workspace forwards , workspace, r+1
bindd = $mainMod Control, h, $d change active workspace backwards , workspace, r-1

$d=[$ws|Navigation]
bindd = $mainMod Control, Down, $d navigate to the nearest empty workspace , workspace, empty

Move focused window to a workspace

$d=[$ws|Move window to workspace]
bindd = $mainMod Shift, 1, $d move to workspace 1 , movetoworkspace, 1
bindd = $mainMod Shift, 2, $d move to workspace 2 , movetoworkspace, 2
bindd = $mainMod Shift, 3, $d move to workspace 3 , movetoworkspace, 3
bindd = $mainMod Shift, 4, $d move to workspace 4 , movetoworkspace, 4
bindd = $mainMod Shift, 5, $d move to workspace 5 , movetoworkspace, 5
bindd = $mainMod Shift, 6, $d move to workspace 6 , movetoworkspace, 6
bindd = $mainMod Shift, 7, $d move to workspace 7 , movetoworkspace, 7
bindd = $mainMod Shift, 8, $d move to workspace 8 , movetoworkspace, 8
bindd = $mainMod Shift, 9, $d move to workspace 9 , movetoworkspace, 9
bindd = $mainMod Shift, 0, $d move to workspace 10 , movetoworkspace, 10

Move focused window to a relative workspace

$d=[$ws]
bindd = $mainMod Control+Alt, l, $d move window to next relative workspace , movetoworkspace, r+1
bindd = $mainMod Control+Alt, h, $d move window to previous relative workspace , movetoworkspace, r-1

Scroll through existing workspaces

$d=[$ws|Navigation]
bindd = $mainMod, mouse_down, $d next workspace, workspace, e+1
bindd = $mainMod, mouse_up, $d previous workspace, workspace, e-1

Move/Switch to special workspace (scratchpad)

$d=[$ws|Navigation|Special workspace]
bindd = $mainMod Shift, S, $d move to scratchpad , movetoworkspace, special
bindd = $mainMod Alt, S, $d move to scratchpad (silent) , movetoworkspacesilent, special
bindd = $mainMod, S, $d toggle scratchpad , togglespecialworkspace

Move focused window to a workspace silently

$d=[$ws|Navigation|Move window silently]
bindd = $mainMod Alt, 1, $d move to workspace 1 (silent), movetoworkspacesilent, 1
bindd = $mainMod Alt, 2, $d move to workspace 2 (silent), movetoworkspacesilent, 2
bindd = $mainMod Alt, 3, $d move to workspace 3 (silent), movetoworkspacesilent, 3
bindd = $mainMod Alt, 4, $d move to workspace 4 (silent), movetoworkspacesilent, 4
bindd = $mainMod Alt, 5, $d move to workspace 5 (silent), movetoworkspacesilent, 5
bindd = $mainMod Alt, 6, $d move to workspace 6 (silent), movetoworkspacesilent, 6
bindd = $mainMod Alt, 7, $d move to workspace 7 (silent), movetoworkspacesilent, 7
bindd = $mainMod Alt, 8, $d move to workspace 8 (silent), movetoworkspacesilent, 8
bindd = $mainMod Alt, 9, $d move to workspace 9 (silent), movetoworkspacesilent, 9
bindd = $mainMod Alt, 0, $d move to workspace 10 (silent), movetoworkspacesilent, 10

$d=#! unset the group name

Config File: /home/oz/.config/hypr/windowrules.conf: Read Succeeded

█░█░█ █ █▄░█ █▀▄ █▀█ █░█░█   █▀█ █░█ █░░ █▀▀ █▀

▀▄▀▄▀ █ █░▀█ █▄▀ █▄█ ▀▄▀▄▀   █▀▄ █▄█ █▄▄ ██▄ ▄█

See https://wiki.hyprland.org/Configuring/Window-Rules/

'$&' is a hyde specific shorthand for "override" \ analogous to a reference

This symbol indicates that the following values will override the default configuration

$&=override

idleinhibit rules

windowrule = idleinhibit fullscreen, class:^(.celluloid.)$|^(.mpv.)$|^(.vlc.)$
windowrule = idleinhibit fullscreen, class:^(.[Ss]potify.)$
windowrule = idleinhibit fullscreen, class:^(.LibreWolf.)$|^(.floorp.)$|^(.Brave.)$|^(.firefox.)$|^(.chromium.)$|^(.zen.)$|^(.vivaldi.)$

Picture-in-Picture

windowrule = float, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$
windowrule = keepaspectratio, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$
windowrule = move 73% 72%, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$
windowrule = size 25%, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$
windowrule = float, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$
windowrule = pin, title:^([Pp]icture[-\s]?[Ii]n[-\s]?[Pp]icture)(.)$

windowrule = opacity 0.90 $&amp; 0.90 $&amp; 1,class:^(firefox)$
windowrule = opacity 0.90 $&amp; 0.90 $&amp; 1,class:^(Brave-browser)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(code-oss)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^([Cc]ode)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(code-url-handler)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(code-insiders-url-handler)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(kitty)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(org.kde.dolphin)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(org.kde.ark)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(nwg-look)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(qt5ct)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(qt6ct)$
windowrule = opacity 0.80 $&amp; 0.80 $&amp; 1,class:^(kvantummanager)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(org.pulseaudio.pavucontrol)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(blueman-manager)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(nm-applet)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(nm-connection-editor)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(org.kde.polkit-kde-authentication-agent-1)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(polkit-gnome-authentication-agent-1)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(org.freedesktop.impl.portal.desktop.gtk)$
windowrule = opacity 0.80 $&amp; 0.70 $&amp; 1,class:^(org.freedesktop.impl.portal.desktop.hyprland)$
windowrule = opacity 0.70 $&amp; 0.70 $&amp; 1,class:^([Ss]team)$
windowrule = opacity 0.70 $&amp; 0.70 $&amp; 1,class:^(steamwebhelper)$
windowrule = opacity 0.70 $&amp; 0.70 $&amp; 1,class:^([Ss]potify)$
windowrule = opacity 0.70 $&amp; 0.70 $&amp; 1,initialTitle:^(Spotify Free)$
windowrule = opacity 0.70 $&amp; 0.70 $&amp; 1,initialTitle:^(Spotify Premium)$

windowrule = opacity 0.90 0.90,class:^(com.github.rafostar.Clapper)$ # Clapper-Gtk
windowrule = opacity 0.80 0.80,class:^(com.github.tchx84.Flatseal)$ # Flatseal-Gtk
windowrule = opacity 0.80 0.80,class:^(hu.kramo.Cartridges)$ # Cartridges-Gtk
windowrule = opacity 0.80 0.80,class:^(com.obsproject.Studio)$ # Obs-Qt
windowrule = opacity 0.80 0.80,class:^(gnome-boxes)$ # Boxes-Gtk
windowrule = opacity 0.80 0.80,class:^(vesktop)$ # Vesktop
windowrule = opacity 0.80 0.80,class:^(discord)$ # Discord-Electron
windowrule = opacity 0.80 0.80,class:^(WebCord)$ # WebCord-Electron
windowrule = opacity 0.80 0.80,class:^(ArmCord)$ # ArmCord-Electron
windowrule = opacity 0.80 0.80,class:^(app.drey.Warp)$ # Warp-Gtk
windowrule = opacity 0.80 0.80,class:^(net.davidotek.pupgui2)$ # ProtonUp-Qt
windowrule = opacity 0.80 0.80,class:^(yad)$ # Protontricks-Gtk
windowrule = opacity 0.80 0.80,class:^(Signal)$ # Signal-Gtk
windowrule = opacity 0.80 0.80,class:^(io.github.alainm23.planify)$ # planify-Gtk
windowrule = opacity 0.80 0.80,class:^(io.gitlab.theevilskeleton.Upscaler)$ # Upscaler-Gtk
windowrule = opacity 0.80 0.80,class:^(com.github.unrud.VideoDownloader)$ # VideoDownloader-Gtk
windowrule = opacity 0.80 0.80,class:^(io.gitlab.adhami3310.Impression)$ # Impression-Gtk
windowrule = opacity 0.80 0.80,class:^(io.missioncenter.MissionCenter)$ # MissionCenter-Gtk
windowrule = opacity 0.80 0.80,class:^(io.github.flattool.Warehouse)$ # Warehouse-Gtk

windowrule = float,class:^(org.kde.dolphin)$,title:^(Progress Dialog — Dolphin)$
windowrule = float,class:^(org.kde.dolphin)$,title:^(Copying — Dolphin)$
windowrule = float,title:^(About Mozilla Firefox)$
windowrule = float,class:^(firefox)$,title:^(Picture-in-Picture)$
windowrule = float,class:^(firefox)$,title:^(Library)$
windowrule = float,class:^(kitty)$,title:^(top)$
windowrule = float,class:^(kitty)$,title:^(btop)$
windowrule = float,class:^(kitty)$,title:^(htop)$
windowrule = float,class:^(vlc)$
windowrule = float,class:^(kvantummanager)$
windowrule = float,class:^(qt5ct)$
windowrule = float,class:^(qt6ct)$
windowrule = float,class:^(nwg-look)$
windowrule = float,class:^(org.kde.ark)$
windowrule = float,class:^(org.pulseaudio.pavucontrol)$
windowrule = float,class:^(blueman-manager)$
windowrule = float,class:^(nm-applet)$
windowrule = float,class:^(nm-connection-editor)$
windowrule = float,class:^(org.kde.polkit-kde-authentication-agent-1)$

windowrule = float,class:^(Signal)$ # Signal-Gtk
windowrule = float,class:^(com.github.rafostar.Clapper)$ # Clapper-Gtk
windowrule = float,class:^(app.drey.Warp)$ # Warp-Gtk
windowrule = float,class:^(net.davidotek.pupgui2)$ # ProtonUp-Qt
windowrule = float,class:^(yad)$ # Protontricks-Gtk
windowrule = float,class:^(eog)$ # Imageviewer-Gtk
windowrule = float,class:^(io.github.alainm23.planify)$ # planify-Gtk
windowrule = float,class:^(io.gitlab.theevilskeleton.Upscaler)$ # Upscaler-Gtk
windowrule = float,class:^(com.github.unrud.VideoDownloader)$ # VideoDownloader-Gkk
windowrule = float,class:^(io.gitlab.adhami3310.Impression)$ # Impression-Gtk
windowrule = float,class:^(io.missioncenter.MissionCenter)$ # MissionCenter-Gtk

common modals

windowrule = float,title:^(Open)$
windowrule = float, title:^(Authentication Required)$
windowrule = float, title:^(Add Folder to Workspace)$
windowrule = float,initialtitle:^(Open File)$
windowrule = float,title:^(Choose Files)$
windowrule = float,title:^(Save As)$
windowrule = float,title:^(Confirm to replace files)$
windowrule = float,title:^(File Operation Progress)$
windowrule = float,class:^([Xx]dg-desktop-portal-gtk)$
windowrule = float, title:^(File Upload)(.)$
windowrule = float, title:^(Choose wallpaper)(.)$
windowrule = float, title:^(Library)(.*)$
windowrule = float,class:^(.dialog.)$
windowrule = float,title:^(.dialog.)$

█░░ ▄▀█ █▄█ █▀▀ █▀█   █▀█ █░█ █░░ █▀▀ █▀

█▄▄ █▀█ ░█░ ██▄ █▀▄   █▀▄ █▄█ █▄▄ ██▄ ▄█

layerrule = blur,rofi
layerrule = ignorezero,rofi
layerrule = blur,notifications
layerrule = ignorezero,notifications
layerrule = blur,swaync-notification-window
layerrule = ignorezero,swaync-notification-window
layerrule = blur,swaync-control-center
layerrule = ignorezero,swaync-control-center
layerrule = blur,logout_dialog

Config File: /home/oz/.config/hypr/monitors.conf: Read Succeeded

Generated by nwg-displays on 2025-06-27 at 23:37:44. Do not edit manually.

monitor=eDP-1,[email protected],0x0,1.0
monitor=HDMI-A-1,[email protected],1920x0,1.0

Config File: /home/oz/.config/hypr/userprefs.conf: Read Succeeded

█░█ █▀ █▀▀ █▀█   █▀█ █▀█ █▀▀ █▀▀ █▀

█▄█ ▄█ ██▄ █▀▄   █▀▀ █▀▄ ██▄ █▀░ ▄█

Set your personal hyprland configuration here

See https://wiki.hyprland.org/Configuring for more information

// █ █▄░█ █▀█ █░█ ▀█▀

// █ █░▀█ █▀▀ █▄█ ░█░

Uncomment to enable // change to a preferred value

🔗 See https://wiki.hyprland.org/Configuring/Variables/#input

input {
kb_options = caps:escape
kb_layout = us
# follow_mouse = 1
# sensitivity = 0.5
# force_no_accel = 0
# accel_profile = flat
# numlock_by_default = true
# scroll_factor = 1
# 🔗 See https://wiki.hyprland.org/Configuring/Variables/#touchpad touchpad {
touchpad {
scroll_factor = 0.4
natural_scroll = yes
}

}

🔗 See https://wiki .hyprland.org/Configuring/Variables/#gestures

gestures {

workspace_swipe = true

workspace_swipe_fingers = 3

}

decoration {

blur {
    enabled = true 
    size = 1 
    passes = 3
    vibrancy = 0.1
    ignore_opacity = false
}

}

bindd = $mainMod, Q, $d open obsidian, exec, obsidian

bind = SUPER, SPACE, exec, ~/.scripts/toggle_touchpad.sh

Config File: /home/oz/.config/hypr/workflows.conf: Read Succeeded
#! █░█░█ █▀█ █▀█ █▄▀ █▀▀ █░░ █▀█ █░█░█ █▀
#! ▀▄▀▄▀ █▄█ █▀▄ █░█ █▀░ █▄▄ █▄█ ▀▄▀▄▀ ▄█

This file sets the current workflow for Hyprland

HyDE Controlled content // DO NOT EDIT

Edit or add workflows in the ./workflows/ directory

and run the 'workflows.sh select' command to update this file

Workflows are a set of configurations that can be applied to Hyprland

that suits the actual workflow you are doing.

It can be gaming mode, work mode, or anything else you can think of.

you can also exec a command within the workflow

$WORKFLOW = default
$WORKFLOW_ICON = 
$WORKFLOW_DESCRIPTION = Default HyDE configuration // Disables workflow overrides
$WORKFLOWS_PATH = ./workflows/default.conf
source = $WORKFLOWS_PATH

Config File: /home/oz/.config/hypr/workflows/default.conf: Read Succeeded

// █▀▄ █▀▀ █▀▀ ▄▀█ █░█ █░░ ▀█▀

// █▄▀ ██▄ █▀░ █▀█ █▄█ █▄▄ ░█░

$WORKFLOW_ICON=
$WORKFLOW_DESCRIPTION = Unset workflow configuration

======Config-End========

Additional Information

This error started to occur me after the last HyDE upgrade

Metadata

Metadata

Assignees

No one assigned

    Labels

    bugSomething isn't working

    Type

    No type

    Projects

    No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions