Description
Script Command
import time
import adafruit_dht
import board
dht_device = adafruit_dht.DHT11(board.D4)
temperature_c = dht_device.temperature
temperature_f = temperature_c * (9 / 5) + 32
humidity = dht_device.humidity
print("Temp:{:.1f} C / {:.1f} C Humidity: {}%".format(temperature_c, temperature_f, humidity))Operating System
6.1.0-rpi7-rpi-2712 #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24) aarch64 GNU/Linux
Hardware
Raspberry Pi 5 Model B
Behavior
`ImportError
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/home/user/development/python/dht11/dht11.py", line 2, in
import adafruit_dht
File "/home/user/development/python/dht11/env/lib/python3.11/site-packages/adafruit_dht.py", line 32, in
from digitalio import DigitalInOut, Pull, Direction
File "/home/user/development/python/dht11/env/lib/python3.11/site-packages/digitalio.py", line 27, in
from adafruit_blinka.microcontroller.bcm2712.pin import *
File "/home/user/development/python/dht11/env/lib/python3.11/site-packages/adafruit_blinka/microcontroller/bcm2712/pin.py", line 5, in
from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
File "/home/user/development/python/dht11/env/lib/python3.11/site-packages/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py", line 8, in
raise ImportError(
ImportError: libgpiod Python bindings not found, please install and try again! See https://github.com/adafruit/Raspberry-Pi-Installer-Scripts/blob/master/libgpiod.sh`
Description
I want to read data from DHT11 sensor.
(https://pimylifeup.com/raspberry-pi-dht11-sensor/)
I've installed everything on the right way, nevertheless I cannot read any data.
I cannot do any operation on GPIO. Neither sensors nor relays.
Additional information
No response