Remove Genuino Occurrences

boards.txt

@@ -14,9 +14,9 @@
 # License along with this library; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 
-# Arduino/Genuino Zero (Prorgamming Port)
+# Arduino Zero (Prorgamming Port)
 # ---------------------------------------
-arduino_zero_edbg.name=Arduino/Genuino Zero (Programming Port)
+arduino_zero_edbg.name=Arduino Zero (Programming Port)
 arduino_zero_edbg.vid.0=0x03eb
 arduino_zero_edbg.pid.0=0x2157
 
@@ -42,29 +42,17 @@ arduino_zero_edbg.build.pid=0x804d
 arduino_zero_edbg.bootloader.tool=openocd
 arduino_zero_edbg.bootloader.file=zero/samd21_sam_ba.bin
 
-# Arduino/Genuino Zero (Native USB Port)
+# Arduino Zero (Native USB Port)
 # --------------------------------------
-arduino_zero_native.name=Arduino/Genuino Zero (Native USB Port)
+arduino_zero_native.name=Arduino Zero (Native USB Port)
 arduino_zero_native.vid.0=0x2341
 arduino_zero_native.pid.0=0x804d
 arduino_zero_native.vid.1=0x2341
 arduino_zero_native.pid.1=0x004d
-
 arduino_zero_native.vid.2=0x2341
 arduino_zero_native.pid.2=0x824d
-# If the board is a 2341:824d use 2341:824d for build and set other parameters as well
-arduino_zero_native.vid.2.build.vid=0x2341
-arduino_zero_native.vid.2.build.pid=0x824d
-arduino_zero_native.vid.2.build.usb_product="Genuino Zero"
-arduino_zero_native.vid.2.bootloader.file=zero/samd21_sam_ba_genuino.bin
-
 arduino_zero_native.vid.3=0x2341
 arduino_zero_native.pid.3=0x024d
-# If the board is a 2341:024d use 2341:824d for build and set other parameters as well
-arduino_zero_native.vid.3.build.vid=0x2341
-arduino_zero_native.vid.3.build.pid=0x824d
-arduino_zero_native.vid.3.build.usb_product="Genuino Zero"
-arduino_zero_native.vid.3.bootloader.file=zero/samd21_sam_ba_genuino.bin
 
 arduino_zero_native.upload.tool=bossac
 arduino_zero_native.upload.protocol=sam-ba
@@ -88,29 +76,17 @@ arduino_zero_native.build.pid=0x804d
 arduino_zero_native.bootloader.tool=openocd
 arduino_zero_native.bootloader.file=zero/samd21_sam_ba.bin
 
-# Arduino/Genuino MKR1000
+# Arduino MKR1000
 # -----------------------
-mkr1000.name=Arduino/Genuino MKR1000
+mkr1000.name=Arduino MKR1000
 mkr1000.vid.0=0x2341
 mkr1000.pid.0=0x804e
 mkr1000.vid.1=0x2341
 mkr1000.pid.1=0x004e
-
 mkr1000.vid.2=0x2341
 mkr1000.pid.2=0x824e
-# If the board is a 2341:824e use 2341:824e for build and set other parameters as well
-mkr1000.vid.2.build.vid=0x2341
-mkr1000.vid.2.build.pid=0x824e
-mkr1000.vid.2.build.usb_product="Genuino MKR1000"
-mkr1000.vid.2.bootloader.file=mkr1000/samd21_sam_ba_genuino_mkr1000.bin
-
 mkr1000.vid.3=0x2341
 mkr1000.pid.3=0x024e
-# If the board is a 2341:024e use 2341:824e for build and set other parameters as well
-mkr1000.vid.3.build.vid=0x2341
-mkr1000.vid.3.build.pid=0x824e
-mkr1000.vid.3.build.usb_product="Genuino MKR1000"
-mkr1000.vid.3.bootloader.file=mkr1000/samd21_sam_ba_genuino_mkr1000.bin
 
 mkr1000.upload.tool=bossac
 mkr1000.upload.protocol=sam-ba