Make overhangs printable

[mjr-woody44]

Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
I wish the bambu slicer had the option to “ make overhangs printable“ like cure. That is one feature that I use often in Cura for designs that don’t need full, supports just a little angle to make it printable.
Describe the solution you'd like
A clear and concise description of what you want to happen.
Add make overhangs printable to the slicer

Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.

Additional context
Add any other context or screenshots about the feature request here.

[Nico04]

Same here, I use this option quite often in Cura, very handy 🙂
I'd love to have this on Bambu Lab Studio

[Haidiye01]

Is this the function, as shown yellow part in the picture

[Nico04]

Here is a picture of an example of this feature :

Source

[odie5533]

Cura has this feature in their CuraEngine. They configure the setting as conical_overhang_enabled (which they show in the interface as "Make Overhangs Printable") https://github.com/Ultimaker/CuraEngine/blob/main/src/FffPolygonGenerator.cpp#L233

And the actual ConicalOverhang function is in https://github.com/Ultimaker/CuraEngine/blob/main/src/ConicalOverhang.cpp

This guy has some good pictures showing how it works: https://forum.prusa3d.com/forum/prusaslicer/make-overhang-printable-option/

I see this issue was assigned to @tangketan by @lanewei120. Is it being worked on? Being considered? It would be extremely appreciated!!! Thanks.

Possibly it could be added to libslic3r/PrintObject.cpp somehow? https://github.com/bambulab/BambuStudio/blob/master/src/libslic3r/PrintObject.cpp#L2417

[Haidiye01]

ok,i have received your letter ,thank you!

[Haidiye00]

Is this function in Cura what you need？

[odie5533]

@Haidiye01 Yes, that's exactly it

[tjc2005]

Really need this, orca has it but not bambustudio

[Haidiye01]

ok,i have received your letter ,thank you!

[PaulKennett]

I also would love to have this feature in Bambu Studio.

[tjc2005]

Come on, is this coming or not?

[cbenhagen]

This has been implemented in this PR in OrcaSlicer and might be ported to PrusaSlicer in this PR.