For runtime BRA test #5
Open
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Currently, hda_dsp_stream_get/put are used to get/put the host dma. However, we may want to use a hda stream that both host and link dma are available. Add helper to find the hda stream and reserve/release it. Signed-off-by: Bard Liao <[email protected]>
SoundWire BPT stream needs to use link and host DMAs. Thus we need helpers to prepare and cleanup the link and host DMAs. Currently the SoundWire BPT stream uses hda_cl_prepare/cleanup helpers. It works fine because we assume the SwoundWire BPT will not run with audio streams simultaneously. The new helpers are copied from hda_cl_prepare/cleanup and add a flag to reserve the paired host and link DMAs. The new helpers will be used by both code loader and SoundWire BPT. Signed-off-by: Bard Liao <[email protected]>
…eams Currently the SoundWire BPT stream uses the paired link DMA but not reserve it. It works without any issue because we assume the SoundWire BPT will not run with audio streams simultaneously. To support simultaneous audio and BPT streams, we need to use the hda_dma_prepare/cleanup helpers to reserve the pair link host DMA. Signed-off-by: Bard Liao <[email protected]>
We should get as much as bandwidth for the BPT stream. Signed-off-by: Bard Liao <[email protected]>
The DP0 (BPT) params are computed in sdw_compute_dp0_port_params(). We should exclude the BPT stream when calculating the audio streams. Signed-off-by: Bard Liao <[email protected]>
We just need to conunt the audio stream bandwidth and BRA stream will use the remaining bandwidth. Signed-off-by: Bard Liao <[email protected]>
colume The existing code assumes the column number will not change, but it could change if curr_dr_freq changes. Calculate the new column number before checking the bandwidth to make the checking be more accurate. Signed-off-by: Bard Liao <[email protected]>
To allow BPT and audio stream work simultaneously, we need to record the hstop of the BPT stream. And use column bpt_hstop + 1 to the last column for audio streams. No function changed since bus->bpt_hstop is set to bus->params.col - 1 for now. Will update bus->audio_stream_hstart in the follow up commit. Signed-off-by: Bard Liao <[email protected]>
Update bus->bpt_hstop to record the hstop of the BPT stream. And return -EAGAIN when there is no bandwidth for the BPT stream. Signed-off-by: Bard Liao <[email protected]>
When a BRA stream is running, we should subtract the columns that is used by the BRA stream in bandwidth calculation. Signed-off-by: Bard Liao <[email protected]>
Now the SoundWire BPT stream and the audio stream can share the SoundWire bus bandwidth. However, it is still not allowed to have more than 1 BPT stream running simultaneously. Signed-off-by: Bard Liao <[email protected]>
To support BRA. Signed-off-by: Bard Liao <[email protected]>
To test BRA Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
With CONFIG_PROVE_RCU_LIST=y and by executing $ netcat -l --sctp & $ netcat --sctp localhost & $ ss --sctp one can trigger the following Lockdep-RCU splat(s): WARNING: suspicious RCU usage 6.18.0-rc1-00093-g7f864458e9a6 #5 Not tainted ----------------------------- net/sctp/diag.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ss/215: #0: ffff9c740828bec0 (nlk_cb_mutex-SOCK_DIAG){+.+.}-{4:4}, at: __netlink_dump_start+0x84/0x2b0 #1: ffff9c7401d72cd0 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_sock_dump+0x38/0x200 stack backtrace: CPU: 0 UID: 0 PID: 215 Comm: ss Not tainted 6.18.0-rc1-00093-g7f864458e9a6 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x90 lockdep_rcu_suspicious.cold+0x4e/0xa3 inet_sctp_diag_fill.isra.0+0x4b1/0x5d0 sctp_sock_dump+0x131/0x200 sctp_transport_traverse_process+0x170/0x1b0 ? __pfx_sctp_sock_filter+0x10/0x10 ? __pfx_sctp_sock_dump+0x10/0x10 sctp_diag_dump+0x103/0x140 __inet_diag_dump+0x70/0xb0 netlink_dump+0x148/0x490 __netlink_dump_start+0x1f3/0x2b0 inet_diag_handler_cmd+0xcd/0x100 ? __pfx_inet_diag_dump_start+0x10/0x10 ? __pfx_inet_diag_dump+0x10/0x10 ? __pfx_inet_diag_dump_done+0x10/0x10 sock_diag_rcv_msg+0x18e/0x320 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x4d/0x100 netlink_unicast+0x1d7/0x2b0 netlink_sendmsg+0x203/0x450 ____sys_sendmsg+0x30c/0x340 ___sys_sendmsg+0x94/0xf0 __sys_sendmsg+0x83/0xf0 do_syscall_64+0xbb/0x390 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Fixes: 8f840e4 ("sctp: add the sctp_diag.c file") Signed-off-by: Stefan Wiehler <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Acked-by: Xin Long <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <[email protected]> Signed-off-by: Janusz Krzysztofik <[email protected]> Reviewed-by: Sebastian Brzezinka <[email protected]> Reviewed-by: Krzysztof Karas <[email protected]> Acked-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit 648ef13) Signed-off-by: Rodrigo Vivi <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.