Ephemeral source port not random

[owendelong]

When using the WiFiClient library as follows:

#include <ESP8266WiFi.h>
#define MY_SSID "ssid"
#define MY_WFPASSWORD "wpa2_key"

WiFiClient client;

void setup() {
  WiFi.begin(MY_SSID, MY_WFPASSWORD);
  while (WiFi.status() != WL_CONNECTED)
  {
    delay(50);
  }
  client.connect(HOST, HTTPPORT);
}

The source port utilized is always "patrolview" or 4097.

This can create a deadly embrace situation if the device is being used to log data and resets itself as a means to try again without delay on certain connection errors. It should be randomized so that a different port is used for each call to connect, even if the device is reset/rebooted between calls.

The problem that can occur is a web server which is in one of the wait states for closing on a previous attempt will see the new attempt to connect as matching the previous one since the SRC_ADDR,SRC_PORT,DST_ADDR,DST_PORT tuple is identical. This results in a retransmission of the previous FIN packet and a reset of the wait timer on the server side. So long as the ESP8266 continues to retry within before the timer expires (often these are ~5 minutes or so), it will be unable to initiate a new connection to the server without being mistaken for the old one.

The simplest solution is to ad code to WiFiClient::connect() that will randomize the local port number.

I will attempt to provide a workable patch shortly.

[owendelong]

Additional information, looks like this problem is actually in the tcp_connect function in the underlying lwip library.

[igrr]

There is a static method in WiFiClient class, static void
setLocalPortStart(uint16_t port);
Find a random number generator which suits your requirements, seed it with
something (ADC reading perhaps?) and call this function somewhere in your
setup() method before you initialize WiFiClients.

On Thu, Jul 30, 2015, 07:58 owendelong [email protected] wrote:

Additional information, looks like this problem is actually in the
tcp_connect function in the underlying lwip library.

—
Reply to this email directly or view it on GitHub
#632 (comment).

[owendelong]

Thanks, Igrr.

I tracked the problem down to this function in the LWIP library:

/**
 * Allocate a new local TCP port.
 *
 * @return a new (free) local TCP port number
 */
static u16_t
tcp_new_port(void)
{
  u8_t i;
  u16_t n = 0;
  struct tcp_pcb *pcb;

again:
  if (tcp_port++ == TCP_LOCAL_PORT_RANGE_END) {
    tcp_port = TCP_LOCAL_PORT_RANGE_START;
  }
  /* Check all PCB lists. */
  for (i = 0; i < NUM_TCP_PCB_LISTS; i++) {
    for(pcb = *tcp_pcb_lists[i]; pcb != NULL; pcb = pcb->next) {
      if (pcb->local_port == tcp_port) {
        if (++n > (TCP_LOCAL_PORT_RANGE_END - TCP_LOCAL_PORT_RANGE_START)) {
          return 0;
        }
        goto again;
      }
    }
  }
  return tcp_port;
}

I agree that your workaround is probably a good solution to my immediate problem (will require testing obviously), but I think it would make just as much sense to replace:

  if (tcp_port++ == TCP_LOCAL_PORT_RANGE_END) {
    tcp_port = TCP_LOCAL_PORT_RANGE_START;
  }

with

   tcp_port = random_port_number();

And create a function like

uint16_t random_port_number()
{
  static bool seeded;
  if (! seeded)
  {
    randomSeed(analogReed(A0));
    seeded=true;
  }
  return(random(TCP_LOCAL_PORT_RANGE_START, TCP_LOCAL_PORT_RANGE_END));
}

Since the function already has a goto again built in to deal with any duplicate port and will still terminate the search after a reasonable number of retries, the only loss is that an exhaustive search of all possible values is not possible. One simple solution to that issue would be to further modify the function to sequentially hunt for an available port from a random starting point. The reality is that collisions are probably going to be fairly rare given the large number space involved and the limit of simultaneous connections that can be supported by the available heap space on the ESP8266.

[owendelong]

So on further research, I'm unable to find any such method in the version of WiFiClient class that ships with the ESP8266 board package used by the Arduino software in its current release.

Nor does it show up in the source code in this repository in either WiFiClient.h or WiFiClient.cpp.

[igrr]

You don't have to make any modifications to lwip to use the port you want.
Both tcp_bind and tcp_connect functions will call tcp_new_port only if the local port in the pcb was set to 0. So the way to override lwip's port allocation mechanism is through setting pcb->local_port, which is exactly what we do.
Plus, lwip is provided as a binary by Espressif, so we can't make such a modification.

The function in question is here:
https://github.com/esp8266/Arduino/blob/esp8266/hardware/esp8266com/esp8266/libraries/ESP8266WiFi/src/WiFiClient.h#L65

For a test, I have just compiled the following sketch with the latest boards manager package:

#include <ESP8266WiFi.h>
#include <WiFiClient.h>

void setup() {
  WiFiClient::setLocalPortStart(analogRead(A0));

}

void loop() {

}

[owendelong]

Interesting... Somehow my boards manager isn't pulling the latest package then. Thanks!

[owendelong]

So... The function you describe is in the development release, but not the stable release. I'm now using the development release and that problem is resolved. I'll mark this closed and take my LWIP issue to Espressif since as you mention, the Espressif port of LWIP is provided as a binary library.

[owendelong]

FYI -- There is open source LWIP (without espconn) available:
http://www.esp8266.com/viewtopic.php?f=6&t=4295&p=24723#p24723

[igrr]

Thanks, unfortunately it doesn't work with recent SDKs — see this issue: https://github.com/kadamski/esp-lwip/issues/7.

[owendelong]

Ugh... There's always a catch with these modules, isn't there.