Added FoBE Quill ESP32S3 Mesh board support

[chihosin]

This pull request introduces support for the FoBE Quill ESP32-S3 Mesh board by adding its configuration to the boards.txt file and defining its pin mappings in pins_arduino.h. These changes primarily implement compatibility for the FoBE Quill ESP32-S3 Mesh hardware and provide the necessary settings for its operation.

• Introduced new variant files including pins_arduino.h, variant.cpp, and bootloader configurations.
• Added definitions for USB, GPIO, and various peripherals.
• Included binary files for tinyuf2 bootloader and firmware.

Product doc link: https://docs.fobestudio.com/product/f1102

[github-actions]

Warnings

⚠️

Some issues found for the commit messages in this PR: the commit message "add(board): Added FoBE Quill ESP32S3 Mesh board support": type/action should be one of [change, ci, docs, feat, fix, refactor, remove, revert, test] body must have leading blank line Please fix these commit messages - here are some basic tips: follow Conventional Commits style correct format of commit message should be: <type/action>(<scope/component>): <summary>, for example fix(esp32): Fixed startup timeout issue allowed types are: change,ci,docs,feat,fix,refactor,remove,revert,test sufficiently descriptive message summary should be between 10 to 72 characters and start with upper case letter avoid Jira references in commit messages (unavailable/irrelevant for our customers) TIP: Install pre-commit hooks and run this check when committing (uses the Conventional Precommit Linter).

👋 Hello chihosin, we appreciate your contribution to this project!

---

📘 Please review the project's Contributions Guide for key guidelines on code, documentation, testing, and more.

---

🖊️ Please also make sure you have read and signed the Contributor License Agreement for this project.

---

Click to see more instructions ...

This automated output is generated by the PR linter DangerJS, which checks if your Pull Request meets the project's requirements and helps you fix potential issues.

DangerJS is triggered with each push event to a Pull Request and modify the contents of this comment.

Please consider the following:
- Danger mainly focuses on the PR structure and formatting and can't understand the meaning behind your code or changes.
- Danger is not a substitute for human code reviews; it's still important to request a code review from your colleagues.
- Resolve all warnings (⚠️ ) before requesting a review from human reviewers - they will appreciate it.
- To manually retry these Danger checks, please navigate to the Actions tab and re-run last Danger workflow.

Review and merge process you can expect ...

We do welcome contributions in the form of bug reports, feature requests and pull requests.

1. An internal issue has been created for the PR, we assign it to the relevant engineer.
2. They review the PR and either approve it or ask you for changes or clarifications.
3. Once the GitHub PR is approved we do the final review, collect approvals from core owners and make sure all the automated tests are passing.
- At this point we may do some adjustments to the proposed change, or extend it by adding tests or documentation.
4. If the change is approved and passes the tests it is merged into the default branch.

Generated by 🚫 dangerJS against 2b14210

[P-R-O-C-H-Y]

@chihosin PTAL on my comments.