The project measures the temperature and ouputs to the speaker.
This library supports the following devices:
DS18B20
DS18S20 - Please note there appears to be an issue with this series.
DS1822
You will need a pull-up resistor of about 5 KOhm between the 1-Wire data line and your 5V power. If you are using the DS18B20, ground pins 1 and 3. The centre pin is the data line '1-wire'.
Speakers, 4-8KOhm speakers connectivity:
Speaker 1-st pin - Digital ground
Speaker 2-nd pin - Digital pin 3
In order to run the project, the following libraries should be checked-out into the arduino library:
1. git clone https://github.com/milesburton/Arduino-Temperature-Control-Library.git
2. git clone https://github.com/going-digital/Talkie.git
3. git clone https://github.com/n0m1/Sleep_n0m1.git
4. git clone https://github.com/pbrook/arduino-onewire.git
This project is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA