Gevako RS6 | 6-channel Smart Switch for Home Assistant

Introduction

The Gevako RS6 is a 6-channel Smart Switch suitable for Home Assistant by using ESPHome. Six individual relays with a maximum switching current of 16 A at max 250 VAC / 30 VDC. Using the powerful ESP32-C6 processor.

Gevako RS6

Pinout

ESP32-C6 GPIO pinout

GPIO pin	Description
GPIO00	Output 1
GPIO01	Output 2
GPIO02	Output 3
GPIO03	Output 4
GPIO04	Output 5
GPIO05	Output 6
GPIO08	Green LED
GPIO09	BOOT
GPIO14	Power source detection

Electrical schematic

Number	Label	Description
1	L1	Power source output. Max 250 VAC / 30 VDC 16 A.
2	O1	Switched output. Max 250 VAC / 30 VDC 16 A.
3	L2	Power source output. Max 250 VAC / 30 VDC 16 A.
4	O2	Switched output. Max 250 VAC / 30 VDC 16 A.
5	L3	Power source output. Max 250 VAC / 30 VDC 16 A.
6	O3	Switched output. Max 250 VAC / 30 VDC 16 A.
7	L4	Power source output. Max 250 VAC / 30 VDC 16 A.
8	O4	Switched output. Max 250 VAC / 30 VDC 16 A.
9	L5	Power source output. Max 250 VAC / 30 VDC 16 A.
10	O5	Switched output. Max 250 VAC / 30 VDC 16 A.
11	L6	Power source output. Max 250 VAC / 30 VDC 16 A.
12	O6	Switched output. Max 250 VAC / 30 VDC 16 A.
13	L	Phase 230 VAC.
14	N	Null 230 VAC.
22	B	BOOT.
23-24	USB	USB-C connector. Max 5 VDC with a current of 1 A.

Electial wiring example

Use the Gavako ESPHome Installer

Gevako ESPHome Installer

Or use the official online ESPHome Installer

ESPHome Installer