Rebase shears/main (#22883185029)#34
Open
gitforwindowshelper[bot] wants to merge 278 commits intobase/shears/main-22883185029from
Open
Rebase shears/main (#22883185029)#34gitforwindowshelper[bot] wants to merge 278 commits intobase/shears/main-22883185029from
gitforwindowshelper[bot] wants to merge 278 commits intobase/shears/main-22883185029from
Conversation
There are no Windows/ARM64 agents in GitHub Actions yet, therefore we just skip adjusting the `vs-test` job for now. Signed-off-by: Dennis Ameling <dennis@dennisameling.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The intention of this change is to align with how the top-level git `Makefile` defines its own test target (which also internally calls `$(MAKE) -C t/ all`). This change also ensures the consistency of `make -C contrib/subtree test` with other testing in CI executions (which rely on `$DEFAULT_TEST_TARGET` being defined as `prove`). Signed-off-by: Victoria Dye <vdye@github.com>
In Git-for-Windows, work on using ARM64 has progressed. The commit 2d94b77 (cmake: allow building for Windows/ARM64, 2020-12-04) failed to notice that /compat/vcbuild/vcpkg_install.bat will default to using the "x64-windows" architecture for the vcpkg installation if not set, but CMake is not told of this default. Commit 635b6d9 (vcbuild: install ARM64 dependencies when building ARM64 binaries, 2020-01-31) later updated vcpkg_install.bat to accept an arch (%1) parameter, but retained the default. This default is neccessary for the use case where the project directory is opened directly in Visual Studio, which will find and build a CMakeLists.txt file without any parameters, thus expecting use of the default setting. Also Visual studio will generate internal .sln solution and .vcxproj project files needed for some extension tools. Inform users of the additional .sln/.vcxproj generation. ** How to test: rm -rf '.vs' # remove old visual studio settings rm -rf 'compat/vcbuild/vcpkg' # remove any vcpkg downloads rm -rf 'contrib/buildsystems/out' # remove builds & CMake artifacts with a fresh Visual Studio Community Edition, File>>Open>>(git *folder*) to load the project (which will take some time!). check for successful compilation. The implicit .sln (etc.) are in the hidden .vs directory created by Visual Studio. Signed-off-by: Philip Oakley <philipoakley@iee.email>
To complement the `--stdin` and `--literally` test cases that verify that we can hash files larger than 4GB on 64-bit platforms using the LLP64 data model, here is a test case that exercises `hash-object` _without_ any options. Just as before, we use the `big` file from the previous test case if it exists to save on setup time, otherwise generate it. Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After importing anything with fast-import, we should always let the garbage collector do its job, since the objects are written to disk inefficiently. This brings down an initial import of http://selenic.com/hg from about 230 megabytes to about 14. In the future, we may want to make this configurable on a per-remote basis, or maybe teach fast-import about it in the first place. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are several categories of absolute paths. One such category starts with a backslash and is implicitly relative to the drive associated with the current working directory. Example: c: git clone https://github.com/git-for-windows/git \G4W should clone into C:\G4W. Back in 2017, Juan Carlos Arevalo Baeza reported a bug in Git's handling of those absolute paths was identified, and fixed. Let's make sure that it stays fixed. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows' equivalent to "bind mounts", NTFS junction points, can be unlinked without affecting the mount target. This is clearly what users expect to happen when they call `git clean -dfx` in a worktree that contains NTFS junction points: the junction should be removed, and the target directory of said junction should be left alone (unless it is inside the worktree). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While Git for Windows does not _ship_ Python (in order to save on bandwidth), MSYS2 provides very fine Python interpreters that users can easily take advantage of, by using Git for Windows within its SDK. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Thorough benchmarking with repacking a subset of linux.git (the commit history reachable from 93a6fef ([PATCH] fix the SYSCTL=n compilation, 2007-02-28), to be precise) suggest that this allocator is on par, in multi-threaded situations maybe even better than nedmalloc: `git repack -adfq` with mimalloc, 8 threads: 31.166991900 27.576763800 28.712311000 27.373859000 27.163141900 `git repack -adfq` with nedmalloc, 8 threads: 31.915032900 27.149883100 28.244933700 27.240188800 28.580849500 In a different test using GitHub Actions build agents (probably single-threaded, a core-strength of nedmalloc)): `git repack -q -d -l -A --unpack-unreachable=2.weeks.ago` with mimalloc: 943.426 978.500 939.709 959.811 954.605 `git repack -q -d -l -A --unpack-unreachable=2.weeks.ago` with nedmalloc: 995.383 952.179 943.253 963.043 980.468 While these measurements were not executed with complete scientific rigor, as no hardware was set aside specifically for these benchmarks, it shows that mimalloc and nedmalloc perform almost the same, nedmalloc with a bit higher variance and also slightly higher average (further testing suggests that nedmalloc performs worse in multi-threaded situations than in single-threaded ones). In short: mimalloc seems to be slightly better suited for our purposes than nedmalloc. Seeing that mimalloc is developed actively, while nedmalloc ceased to see any updates in eight years, let's use mimalloc on Windows instead. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since commit 0c499ea (send-pack: demultiplex a sideband stream with status data, 2010-02-05) the send-pack builtin uses the side-band-64k capability if advertised by the server. Unfortunately this breaks pushing over the dump git protocol if used over a network connection. The detailed reasons for this breakage are (by courtesy of Jeff Preshing, quoted from https://groups.google.com/d/msg/msysgit/at8D7J-h7mw/eaLujILGUWoJ): MinGW wraps Windows sockets in CRT file descriptors in order to mimic the functionality of POSIX sockets. This causes msvcrt.dll to treat sockets as Installable File System (IFS) handles, calling ReadFile, WriteFile, DuplicateHandle and CloseHandle on them. This approach works well in simple cases on recent versions of Windows, but does not support all usage patterns. In particular, using this approach, any attempt to read & write concurrently on the same socket (from one or more processes) will deadlock in a scenario where the read waits for a response from the server which is only invoked after the write. This is what send_pack currently attempts to do in the use_sideband codepath. The new config option `sendpack.sideband` allows to override the side-band-64k capability of the server, and thus makes the dumb git protocol work. Other transportation methods like ssh and http/https still benefit from the sideband channel, therefore the default value of `sendpack.sideband` is still true. Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de> Signed-off-by: Oliver Schneider <oliver@assarbad.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In 1e64d18 (mingw: do resolve symlinks in `getcwd()`) a problem was introduced that causes git for Windows to stop working with certain mapped network drives (in particular, drives that are mapped to locations with long path names). Error message was "fatal: Unable to read current working directory: No such file or directory". Present change fixes this issue as discussed in git-for-windows#2480 Signed-off-by: Bjoern Mueller <bjoernm@gmx.de>
Update clink.pl to link with either libcurl.lib or libcurl-d.lib depending on whether DEBUG=1 is set. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a Win32 API function to resolve symbolic links, and we can use that instead of resolving them manually. Even better, this function also resolves NTFS junction points (which are somewhat similar to bind mounts). This fixes git-for-windows#2481. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The native Windows HTTPS backend is based on Secure Channel which lets the caller decide how to handle revocation checking problems caused by missing information in the certificate or offline CRL distribution points. Unfortunately, cURL chose to handle these problems differently than OpenSSL by default: while OpenSSL happily ignores those problems (essentially saying "¯\_(ツ)_/¯"), the Secure Channel backend will error out instead. As a remedy, the "no revoke" mode was introduced, which turns off revocation checking altogether. This is a bit heavy-handed. We support this via the `http.schannelCheckRevoke` setting. In curl/curl#4981, we contributed an opt-in "best effort" strategy that emulates what OpenSSL seems to do. In Git for Windows, we actually want this to be the default. This patch makes it so, introducing it as a new value for the `http.schannelCheckRevoke" setting, which now becmes a tristate: it accepts the values "false", "true" or "best-effort" (defaulting to the last one). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The convention in Git project's shell scripts is to have white-space _before_, but not _after_ the `>` (or `<`). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This change enhances `git commit --cleanup=scissors` by detecting scissors lines ending in either LF (UNIX-style) or CR/LF (DOS-style). Regression tests are included to specifically test for trailing comments after a CR/LF-terminated scissors line. Signed-off-by: Luke Bonanomi <lbonanomi@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For some reason, this test case was indented with 4 spaces instead of 1 horizontal tab. The other test cases in the same test script are fine. Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As of Git v2.28.0, the diff for files staged via `git add -N` marks them as new files. Git GUI was ill-prepared for that, and this patch teaches Git GUI about them. Please note that this will not even fix things with v2.28.0, as the `rp/apply-cached-with-i-t-a` patches are required on Git's side, too. This fixes git-for-windows#2779 Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
The vcpkg downloads may not succeed. Warn careful readers of the time out. A simple retry will usually resolve the issue. Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Git's regular Makefile mentions that HOST_CPU should be defined when cross-compiling Git: https://github.com/git-for-windows/git/blob/37796bca76ef4180c39ee508ca3e42c0777ba444/Makefile#L438-L439 This is then used to set the GIT_HOST_CPU variable when compiling Git: https://github.com/git-for-windows/git/blob/37796bca76ef4180c39ee508ca3e42c0777ba444/Makefile#L1337-L1341 Then, when the user runs `git version --build-options`, it returns that value: https://github.com/git-for-windows/git/blob/37796bca76ef4180c39ee508ca3e42c0777ba444/help.c#L658 This commit adds the same functionality to the CMake configuration. Users can now set -DHOST_CPU= to set the target architecture. Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
As reported in newren/git-filter-repo#225, it looks like 99 bytes is not really sufficient to represent e.g. the full path to Python when installed via Windows Store (and this path is used in the hasb bang line when installing scripts via `pip`). Let's increase it to what is probably the maximum sensible path size: MAX_PATH. This makes `parse_interpreter()` in line with what `lookup_prog()` handles. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Vilius Šumskas <vilius@sumskas.eu>
We used to have that `make vcxproj` hack, but a hack it is. In the meantime, we have a much cleaner solution: using CMake, either explicitly, or even more conveniently via Visual Studio's built-in CMake support (simply open Git's top-level directory via File>Open>Folder...). Let's let the `README` reflect this. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This adds support for a new http.sslAutoClientCert config value. In cURL 7.77 or later the schannel backend does not automatically send client certificates from the Windows Certificate Store anymore. This config value is only used if http.sslBackend is set to "schannel", and can be used to opt in to the old behavior and force cURL to send client certificates. This fixes git-for-windows#3292 Signed-off-by: Pascal Muller <pascalmuller@gmail.com>
Because `git subtree` (unlike most other `contrib` modules) is included as part of the standard release of Git for Windows, its stability should be verified as consistently as it is for the rest of git. By including the `git subtree` tests in the CI workflow, these tests are as much of a gate to merging and indicator of stability as the standard test suite. Signed-off-by: Victoria Dye <vdye@github.com>
These fixes have been sent to the Git mailing list but have not been picked up by the Git project yet. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Ensure key CMake option values are part of the CMake output to facilitate user support when tool updates impact the wider CMake actions, particularly ongoing 'improvements' in Visual Studio. These CMake displays perform the same function as the build-options.txt provided in the main Git for Windows. CMake is already chatty. The setting of CMAKE_EXPORT_COMPILE_COMMANDS is also reported. Include the environment's CMAKE_EXPORT_COMPILE_COMMANDS value which may have been propogated to CMake's internal value. Testing the CMAKE_EXPORT_COMPILE_COMMANDS processing can be difficult in the Visual Studio environment, as it may be cached in many places. The 'environment' may include the OS, the user shell, CMake's own environment, along with the Visual Studio presets and caches. See previous commit for arefacts that need removing for a clean test. Signed-off-by: Philip Oakley <philipoakley@iee.email>
This is no longer true in general, not with supporting Clang out of the box. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This option was added in fa93bb2 (MinGW: Fix stat definitions to work with MinGW runtime version 4.0, 2013-09-11), i.e. a _long_ time ago. So long, in fact, that it still targeted MinGW. But we switched to mingw-w64 in 2015, which seems not to share the problem, and therefore does not require a fix. Even worse: This flag is incompatible with UCRT64, which we are about to support by way of upstreaming `mingw-w64-git` to the MSYS2 project, see msys2/MINGW-packages#26470 for details. So let's send that option into its well-deserved retirement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links actually have a type depending on the target: it can be a file or a directory. In certain circumstances, this poses problems, e.g. when a symbolic link is supposed to point into a submodule that is not checked out, so there is no way for Git to auto-detect the type. To help with that, we will add support over the course of the next commits to specify that symlink type via the Git attributes. This requires an index_state, though, something that Git for Windows' `symlink()` replacement cannot know about because the function signature is defined by the POSIX standard and not ours to change. So let's introduce a helper function to create symbolic links that *does* know about the index_state. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are not), it uses the `-links` option of the `find` utility. BusyBox' implementation does not support that option, and BusyBox-w32's lstat() does not even report the number of hard links correctly (for performance reasons). So let's just switch to a different method that actually works on Windows. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With improvements by Clive Chan, Adric Norris, Ben Bodenmiller and Philip Oakley. Helped-by: Clive Chan <cc@clive.io> Helped-by: Adric Norris <landstander668@gmail.com> Helped-by: Ben Bodenmiller <bbodenmiller@hotmail.com> Helped-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Brendan Forster <brendan@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at a file, and a "directory symlink" must point at a directory. If the type of symlink does not match its target, it doesn't work. Git does not record the type of symlink in the index or in a tree. On checkout it'll guess the type, which only works if the target exists at the time the symlink is created. This may often not be the case, for example when the link points at a directory inside a submodule. By specifying `symlink=file` or `symlink=dir` the user can specify what type of symlink Git should create, so Git doesn't have to rely on unreliable heuristics. Signed-off-by: Bert Belder <bertbelder@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes with benefits but also at a heavy price: on the plus side, MSYS2's POSIX emulation layer allows us to continue pretending that we are on a Unix system, e.g. use Unix paths instead of Windows ones, yet this is bought at a rather noticeable performance penalty. There *are* some more native ports of Unix shells out there, though, most notably BusyBox-w32's ash. These native ports do not use any POSIX emulation layer (or at most a *very* thin one, choosing to avoid features such as fork() that are expensive to emulate on Windows), and they use native Windows paths (usually with forward slashes instead of backslashes, which is perfectly legal in almost all use cases). And here comes the problem: with a $PWD looking like, say, C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh Git's test scripts get quite a bit confused, as their assumptions have been shattered. Not only does this path contain a colon (oh no!), it also does not start with a slash. This is a problem e.g. when constructing a URL as t5813 does it: ssh://remote$PWD. Not only is it impossible to separate the "host" from the path with a $PWD as above, even prefixing $PWD by a slash won't work, as /C:/git-sdk-64/... is not a valid path. As a workaround, detect when $PWD does not start with a slash on Windows, and simply strip the drive prefix, using an obscure feature of Windows paths: if an absolute Windows path starts with a slash, it is implicitly prefixed by the drive prefix of the current directory. As we are talking about the current directory here, anyway, that strategy works. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child processes any chance to perform any cleanup operations. This is bad insofar as Git itself expects its signal handlers to run. A symptom is e.g. a left-behind .lock file that would not be left behind if the same operation was run, say, on Linux. To remedy this situation, we use an obscure trick: we inject a thread into the process that needs to be killed and to let that thread run the ExitProcess() function with the desired exit status. Thanks J Wyman for describing this trick. The advantage is that the ExitProcess() function lets the atexit handlers run. While this is still different from what Git expects (i.e. running a signal handler), in practice Git sets up signal handlers and atexit handlers that call the same code to clean up after itself. In case that the gentle method to terminate the process failed, we still fall back to calling TerminateProcess(), but in that case we now also make sure that processes spawned by the spawned process are terminated; TerminateProcess() does not give the spawned process a chance to do so itself. Please note that this change only affects how Git for Windows tries to terminate processes spawned by Git's own executables. Third-party software that *calls* Git and wants to terminate it *still* need to make sure to imitate this gentle method, otherwise this patch will not have any effect. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than using private IFTTT Applets that send mails to this maintainer whenever a new version of a Git for Windows component was released, let's use the power of GitHub workflows to make this process publicly visible. This workflow monitors the Atom/RSS feeds, and opens a ticket whenever a new version was released. Note: Bash sometimes releases multiple patched versions within a few minutes of each other (i.e. 5.1p1 through 5.1p4, 5.0p15 and 5.0p16). The MSYS2 runtime also has a similar system. We can address those patches as a group, so we shouldn't get multiple issues about them. Note further: We're not acting on newlib releases, OpenSSL alphas, Perl release candidates or non-stable Perl releases. There's no need to open issues about them. Co-authored-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we need to adjust the template (because it only matches core Git's project management style, not ours). Also: direct Git for Windows enhancements to their contributions page, space out the text for easy reading, and clarify that the mailing list is plain text, not HTML. Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At least on _some_ APFS network shares, Git fails to rename the object files because they are marked as read-only, because that has the effect of setting the uchg flag on APFS, which then means the file can't be renamed or deleted. To work around that, when a rename failed, and the read-only flag is set, try to turn it off and on again. This fixes git-for-windows#4482 Signed-off-by: David Lomas <dl3@pale-eds.co.uk> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
This was pull request git-for-windows#1645 from ZCube/master Support windows container. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the symlink is resolved correctly, we use the fact that `git.exe` is a native Win32 program, and that `git.exe config -f <path>` therefore uses the native symlink resolution. Signed-off-by: Bert Belder <bertbelder@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to contain a colon. If we feed that path to CVS, it mistakes it for a separator between host and port, though. This has not been a problem so far because Git for Windows uses MSYS2's Bash using a POSIX emulation layer that also pretends that the current directory is a Unix path (at least as long as we're in a shell script). However, that is rather limiting, as Git for Windows also explores other ports of other Unix shells. One of those is BusyBox-w32's ash, which is a native port (i.e. *not* using any POSIX emulation layer, and certainly not emulating Unix paths). So let's just detect if there is a colon in $PWD and punt in that case. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Windows Subsystem for Linux (WSL) version 2 allows to use `chmod` on NTFS volumes provided that they are mounted with metadata enabled (see https://devblogs.microsoft.com/commandline/chmod-chown-wsl-improvements/ for details), for example: $ chmod 0755 /mnt/d/test/a.sh In order to facilitate better collaboration between the Windows version of Git and the WSL version of Git, we can make the Windows version of Git also support reading and writing NTFS file modes in a manner compatible with WSL. Since this slightly slows down operations where lots of files are created (such as an initial checkout), this feature is only enabled when `core.WSLCompat` is set to true. Note that you also have to set `core.fileMode=true` in repositories that have been initialized without enabling WSL compatibility. There are several ways to enable metadata loading for NTFS volumes in WSL, one of which is to modify `/etc/wsl.conf` by adding: ``` [automount] enabled = true options = "metadata,umask=027,fmask=117" ``` And reboot WSL. It can also be enabled temporarily by this incantation: $ sudo umount /mnt/c && sudo mount -t drvfs C: /mnt/c -o metadata,uid=1000,gid=1000,umask=22,fmask=111 It's important to note that this modification is compatible with, but does not depend on WSL. The helper functions in this commit can operate independently and functions normally on devices where WSL is not installed or properly configured. Signed-off-by: xungeng li <xungeng@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, we did not install any handler for Ctrl+C, but now we really want to because the MSYS2 runtime learned the trick to call the ConsoleCtrlHandler when Ctrl+C was pressed. With this, hitting Ctrl+C while `git log` is running will only terminate the Git process, but not the pager. This finally matches the behavior on Linux and on macOS. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
…ITOR" In e3f7e01 (Revert "editor: save and reset terminal after calling EDITOR", 2021-11-22), we reverted the commit wholesale where the terminal state would be saved and restored before/after calling an editor. The reverted commit was intended to fix a problem with Windows Terminal where simply calling `vi` would cause problems afterwards. To fix the problem addressed by the revert, but _still_ keep the problem with Windows Terminal fixed, let's revert the revert, with a twist: we restrict the save/restore _specifically_ to the case where `vi` (or `vim`) is called, and do not do the same for any other editor. This should still catch the majority of the cases, and will bridge the time until the original patch is re-done in a way that addresses all concerns. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--stdin` option was a well-established paradigm in other commands, therefore we implemented it in `git reset` for use by Visual Studio. Unfortunately, upstream Git decided that it is time to introduce `--pathspec-from-file` instead. To keep backwards-compatibility for some grace period, we therefore reinstate the `--stdin` option on top of the `--pathspec-from-file` option, but mark it firmly as deprecated. Helped-by: Victoria Dye <vdye@github.com> Helped-by: Matthew John Cheetham <mjcheetham@outlook.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reintroduce the 'core.useBuiltinFSMonitor' config setting (originally added in 0a756b2 (fsmonitor: config settings are repository-specific, 2021-03-05)) after its removal from the upstream version of FSMonitor. Upstream, the 'core.useBuiltinFSMonitor' setting was rendered obsolete by "overloading" the 'core.fsmonitor' setting to take a boolean value. However, several applications (e.g., 'scalar') utilize the original config setting, so it should be preserved for a deprecation period before complete removal: * if 'core.fsmonitor' is a boolean, the user is correctly using the new config syntax; do not use 'core.useBuiltinFSMonitor'. * if 'core.fsmonitor' is unspecified, use 'core.useBuiltinFSMonitor'. * if 'core.fsmonitor' is a path, override and use the builtin FSMonitor if 'core.useBuiltinFSMonitor' is 'true'; otherwise, use the FSMonitor hook indicated by the path. Additionally, for this deprecation period, advise users to switch to using 'core.fsmonitor' to specify their use of the builtin FSMonitor. Signed-off-by: Victoria Dye <vdye@github.com>
See https://docs.github.com/en/code-security/dependabot/working-with-dependabot/keeping-your-actions-up-to-date-with-dependabot#enabling-dependabot-version-updates-for-actions for details. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the recommended way on GitHub to describe policies revolving around security issues and about supported versions. Helped-by: Sven Strickroth <email@cs-ware.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
…ws#4527) With this patch, Git for Windows works as intended on mounted APFS volumes (where renaming read-only files would fail). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Specify symlink type in .gitattributes
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch introduces support to set special NTFS attributes that are interpreted by the Windows Subsystem for Linux as file mode bits, UID and GID. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Handle Ctrl+C in Git Bash nicely Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A fix for calling `vim` in Windows Terminal caused a regression and was reverted. We partially un-revert this, to get the fix again. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch re-adds the deprecated --stdin/-z options to `git reset`. Those patches were overridden by a different set of options in the upstream Git project before we could propose `--stdin`. We offered this in MinGit to applications that wanted a safer way to pass lots of pathspecs to Git, and these applications will need to be adjusted. Instead of `--stdin`, `--pathspec-from-file=-` should be used, and instead of `-z`, `--pathspec-file-nul`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Originally introduced as `core.useBuiltinFSMonitor` in Git for Windows and developed, improved and stabilized there, the built-in FSMonitor only made it into upstream Git (after unnecessarily long hemming and hawing and throwing overly perfectionist style review sticks into the spokes) as `core.fsmonitor = true`. In Git for Windows, with this topic branch, we re-introduce the now-obsolete config setting, with warnings suggesting to existing users how to switch to the new config setting, with the intention to ultimately drop the patch at some stage. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
…updates Start monitoring updates of Git for Windows' component in the open
Add a README.md for GitHub goodness. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Workflow run
Rebase Summary: main
From: 39b1bd5ca7 (Merge 'readme' into HEAD, 2018-06-07) (d1ec8a48f4..39b1bd5ca7)
To: e75df20b0c (Merge 'readme' into HEAD, 2018-06-07) (0f0082cc3d..e75df20b0c)
Statistics
Range-diff (click to expand)