liunx服务器部署的Higress创建MCP服务点击确定没反应 || The Higress deployed by the liunx server creates the MCP service and clicks OK but there is no response.

[RocherKong]

liunx服务器容器化部署的Higress（版本2.2.1）创建MCP服务点击确定没反应（F12看了没请求，没报错）。但是我在windows下通过docker desktop部署的Higress就没问题，能保存。

---

When Higress (version 2.2.1), which is containerized and deployed on the liunx server, creates the MCP service and clicks OK, there is no response (F12 shows that there is no request and no error is reported). But the Higress I deployed through docker desktop under windows was fine and could be saved.

[CH3CHO]

这个和操作系统无关的，请详细描述重现流程。

---

This has nothing to do with the operating system. Please describe the reproduction process in detail.

[RocherKong]

这个和操作系统无关的，请详细描述重现流程。

This has nothing to do with the operating system. Please describe the reproduction process in detail.
你好，步骤如下：

1. 在Nacos 3.2.1 版本中创建MCP Server，关联我的MCP
2. 在Higress 2.2.1版本中，在服务来源中创建Nacos 3.X的来源,服务列表自动关联到Nacos中我的MCP
3. 在Higress 中AI网关管理-》MCP管理中，创建MCP服务，服务名称填写：test,描述：test, 服务类型选择直接路由，服务名称选择我的MCP,Transport:SSE,路径：/sse,点击确认，无反应（F12看了没有接口调用，且也没控制台错误和页面校验错误）

[CH3CHO]

这是一个已知 bug，创建 MCP 服务的功能暂不兼容服务名字里有冒号的服务。如果你已经在 Nacos 里创建了 MCP Server，直接开启 Nacos 3.x 服务来源里的 MCP 服务发现功能就可以了，不需要再在 Higress 里创建 MCP 服务。

---

This is a known bug. The function of creating MCP services is currently not compatible with services with colons in their service names. If you have already created an MCP Server in Nacos, you can directly enable the MCP service discovery function in the Nacos 3.x service source. There is no need to create an MCP service in Higress.

[RocherKong]

这是一个已知 bug，创建 MCP 服务的功能暂不兼容服务名字里有冒号的服务。如果你已经在 Nacos 里创建了 MCP Server，直接开启 Nacos 3.x 服务来源里的 MCP 服务发现功能就可以了，不需要再在 Higress 里创建 MCP 服务。

This is a known bug. The function of creating MCP services is currently not compatible with services with colons in their service names. If you have already created an MCP Server in Nacos, you can directly enable the MCP service discovery function in the Nacos 3.x service source. There is no need to create an MCP service in Higress.

因为我想这里创建针对MCP的网关路由转发到我的MCP服务，如果不在Nacos创建，换成直接在Higress创建直接路由到我的mcp,我是要先在服务来源中创建固定地址类型的服务指向我的IP：Port，配置后会在服务列表中生成一个服务（xxx.static）,然后再通过路由配置页面配置该固定地址的服务（xxx.static）进行转发？

[CH3CHO]

因为我想这里创建针对MCP的网关路由转发到我的MCP服务，如果不在Nacos创建，换成直接在Higress创建直接路由到我的mcp,我是要先在服务来源中创建固定地址类型的服务指向我的IP：Port，配置后会在服务列表中生成一个服务（xxx.static）,然后再通过路由配置页面配置该固定地址的服务（xxx.static）进行转发？

对，这样也是可以的。

---

Because I want to create a gateway route for MCP here and forward it to my MCP service. If it is not created in Nacos, I can instead create a direct route in Higress to my mcp. Do I need to first create a fixed address type service in the service source to point to my IP: Port. After configuration, a service (xxx.static) will be generated in the service list, and then configure the fixed address service (xxx.static) through the routing configuration page for forwarding?

Yes, this is also possible.

[RocherKong]

因为我想这里创建针对MCP的网关路由转发到我的MCP服务，如果不在Nacos创建，换成直接在Higress创建直接路由到我的mcp,我是要先在服务来源中创建固定地址类型的服务指向我的IP：Port，配置后会在服务列表中生成一个服务（xxx.static）,然后再通过路由配置页面配置该固定地址的服务（xxx.static）进行转发？

对，这样也是可以的。

Because I want to create a gateway route for MCP here and forward it to my MCP service. If it is not created in Nacos, I can instead create a direct route in Higress to my mcp. Do I need to first create a fixed address type service in the service source to point to my IP: Port. After configuration, a service (xxx.static) will be generated in the service list, and then configure the fixed address service (xxx.static) through the routing configuration page for forwarding?

Yes, this is also possible.

这种模式我刚试了下，Higress创建直接路由/xxx/sse前缀匹配，在himarket通过higress转发获取工具时会以Get ip:port/xxx/sse 方式请求到MCP（请求不成功，404），但应该是POST 到 /messages 获取tool列表（在himarket中直接配置我的mcp调用正常的时候日志打印出来就这个），也不知道哪里配置有问题。。

[CH3CHO]

提供 Higress 完整的配置操作流程吧。先不要用HiMarket，把Higress自己配的路由跑通为先。

---

Provide the complete configuration operation process of Higress. Don't use HiMarket yet, run the route configured by Higress first.