Some Synology sensors have gone in 0.109.3

[Spirituss]

The problem

I have updated my HA from 0.109.2 to 0.109.3 and lost some Synology integration sensors. I still see them on the 'Synology NAS (sda)' device page of the integration, but they have 'unknown status'.
These sensors have gone:

• sensor.synology_below_min_remaining_life_sda (last letter corresponds to disk)
• sensor.synology_exceeded_max_bad_sectors_sda (last letter corresponds to disk)

Environment

• Home Assistant Core release with the issue: 0.109.3
• Last working Home Assistant Core release (if known): 0.109.2
• Operating environment (Home Assistant/Supervised/Docker/venv): Home Assistant (ex HASSio)/Docker/Synology DSM
• Integration causing this issue: Synology DSM
• Link to integration documentation on our website: https://www.home-assistant.io/integrations/synology_dsm/

Problem-relevant configuration.yaml

Since 0.109 the platform has no YAML mode.

Traceback/Error logs

None.

Additional information

[pergolafabio]

yes, i see the same unknown state for me too, allthough i never used them before
but in the states pages, they are indeed : unknown

[probot-home-assistant]

synology_dsm documentation
synology_dsm source
_{^{(message by IssueLinks)}}

[probot-home-assistant]

Hey there @ProtoThis, @Quentame, mind taking a look at this issue as its been labeled with a integration (synology_dsm) you are listed as a codeowner for? Thanks!
_{^{(message by CodeOwnersMention)}}

[Quentame]

Hi @Spirituss !

Are you sure those two sensors where working on 0.109.0 ? As I remember, nothing changed for those sensors, or maybe a bug introduced #35068

Experiencing the same, haven't seen it, will fix very soon.

PS: synology_dsm is still available via the config.yaml, but not via a sensor platform.

[Quentame]

Oh yeah, could be in #35068

Since I now test if not attr: and was before if attr is None:, so in the case of 0, it will mark the sensor as unknown.

Thanks for seeing this 😉

[Spirituss]

Are you sure those two sensors where working on 0.109.0 ? As I remember, nothing changed for those sensors, or maybe a bug introduced #35068

I’m not sure, but I’m sure that 0.108 it worked well.