Initial Victron Venus documentation. #35739
Conversation
✅ Deploy Preview for home-assistant-docs ready!
To edit notification comments on pull requests, go to your Netlify site configuration. |
📝 WalkthroughWalkthroughA new documentation file has been added to describe the Victron Venus OS integration with Home Assistant. The guide details how to connect via local MQTT, explains automatic discovery using UPnP/Simple Service Discovery Protocol, and provides step-by-step installation and configuration instructions. It covers prerequisites, troubleshooting steps, and lists sensor categories along with their metrics. A security warning regarding default credentials is also included. Changes
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Outside diff range and nitpick comments (3)
source/_integrations/victronvenus.markdown (3)
14-17: Enhance the overview section with more contextConsider adding:
- A brief explanation of what Venus OS is and its typical use cases
- An overview of what functionality this integration provides (monitoring, control capabilities, etc.)
- Prerequisites or requirements for using this integration
Example addition:
The Victron Venus OS integration allows connection to a Venus Victron OS device that has local MQTT enabled. This add-on will automatically configure the integration through UPnP/Simple Service Discovery Protocol if possible. + +Venus OS is the operating system that runs on Victron Energy's GX range of devices, +providing monitoring and control capabilities for Victron energy systems. This +integration allows Home Assistant to monitor your solar power system, including +grid metrics, solar production, battery status, and power consumption.
18-50: Enhance sensor documentation with units and examplesConsider the following improvements:
- Add units for measurements where missing (e.g., voltage in V, current in A)
- Provide examples of how to calculate and use delta values
- Add typical value ranges where applicable
Example addition for lifetime totals:
- The lifetime running total of all energy consumed from the grid, or fed back to the grid. These figures generally only makes sense as delta values. +For example, to calculate energy consumption over the last hour: + - Current reading: 1000 kWh + - Reading from 1 hour ago: 999 kWh + - Energy consumed in last hour = 1 kWh
66-74: Remove trailing space and consider adding future plans
- Remove trailing space:
-The integration was built and tested against an installation consisting of a +The integration was built and tested against an installation consisting of a
- Consider adding a section about future plans or roadmap, for example:
- This integration was not tested with MQTT with SSL. + +### Future Plans + +The following features are planned for future releases: +- Support for changing settings from Home Assistant +- Support for additional Victron configurations +- MQTT SSL support🧰 Tools
🪛 Markdownlint
66-66: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (1)
source/_integrations/victronvenus.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/victronvenus.markdown
[uncategorized] ~53-~53: Possible missing comma found.
Context: ...ctron Venus device is not automatically detected ensure that MQTT on LAN is enabled. To ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~57-~57: Did you mean: “By default,”?
Context: ...Connect to your device using a browser. By default the device should be available at [htt...
(BY_DEFAULT_COMMA)
[uncategorized] ~59-~59: Possible missing comma found.
Context: ...local.](http://venus.local./). - In the menu navigate to Settings > Services and ens...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint
source/_integrations/victronvenus.markdown
66-66: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
| If your Victron Venus device is not automatically detected ensure that MQTT on | ||
| LAN is enabled. To enable MQTT on your device the following instructions can be | ||
| followed (as tested on a Cerbo GX): | ||
|
|
||
| - Connect to your device using a browser. By default the device should be | ||
| available at [http://venus.local.](http://venus.local./). | ||
| - In the menu navigate to Settings > Services and ensure MQTT on LAN is switched | ||
| on. |
There was a problem hiding this comment.
Fix grammar and URL formatting issues
- Add missing commas:
-If your Victron Venus device is not automatically detected ensure that MQTT on
+If your Victron Venus device is not automatically detected, ensure that MQTT on-By default the device should be
+By default, the device should be- Fix malformed URL:
-[http://venus.local.](http://venus.local./).
+[http://venus.local](http://venus.local)- Consider adding troubleshooting steps for common issues:
- What to do if the device is not available at the default URL
- How to verify MQTT is working correctly
- Common error messages and their solutions
Committable suggestion skipped: line range outside the PR's diff.
🧰 Tools
🪛 LanguageTool
[uncategorized] ~53-~53: Possible missing comma found.
Context: ...ctron Venus device is not automatically detected ensure that MQTT on LAN is enabled. To ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~57-~57: Did you mean: “By default,”?
Context: ...Connect to your device using a browser. By default the device should be available at [htt...
(BY_DEFAULT_COMMA)
[uncategorized] ~59-~59: Possible missing comma found.
Context: ...local.](http://venus.local./). - In the menu navigate to Settings > Services and ens...
(AI_HYDRA_LEO_MISSING_COMMA)
| --- | ||
| title: "Victron Venus OS Integration" | ||
| description: "Documentation for the Victron Venus integration" | ||
| ha_release: "2024.12" | ||
| ha_category: Sensor | ||
| ha_iot_class: "Local Push" | ||
| ha_config_flow: true | ||
| ha_codeowners: | ||
| - '@JohansLab' | ||
| ha_domain: victronvenus | ||
|
|
There was a problem hiding this comment.
💡 Codebase verification
Release version "2024.12" seems far in the future
- Please confirm if this version is intentional.
- The "Energy" category is not recognized in the current integrations. Consider using existing categories or defining "Energy" appropriately.
🔗 Analysis chain
Verify the release version and integration categories
A few suggestions for the metadata:
- The release version "2024.12" seems quite far in the future. Please verify if this is the intended version.
- Consider adding more categories based on the integration's capabilities:
- "Energy" - since it provides energy-related sensors
- "Battery" - for battery monitoring features
- "Solar" - for solar panel monitoring
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Check other energy-related integrations for consistent categorization
rg -l "ha_category:.*Energy" source/_integrations/
Length of output: 52
Script:
#!/bin/bash
# Search for category definitions in documentation
rg "ha_category:" docs/
Length of output: 69
Script:
#!/bin/bash
# List all category definitions in integrations
rg "ha_category:" source/_integrations/
Length of output: 71645
jbouwh
left a comment
jbouwh
left a comment
There was a problem hiding this comment.
Please target initial docunentation against the next branch and link the PR from the core repo
|
Please take a look at the requested changes, and use the Ready for review button when you are done, thanks 👍 |
jbouwh
added
the
needs-rebase
JohansLab
force-pushed
the
victronvenusinitial
branch
from
01a536a to
2748278
Compare
home-assistant
bot
added
next
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Outside diff range and nitpick comments (3)
source/_integrations/victronvenus.markdown (3)
14-16: Enhance overview section with additional contextConsider adding:
- Prerequisites (e.g., minimum Venus OS version)
- Link to official Victron Venus OS documentation
- List of supported/tested hardware models
18-50: Add technical details to sensor documentationConsider enhancing the sensor documentation with:
- Units for each measurement (V, A, W, etc.)
- Sensor update frequency/refresh rate
- Entity naming patterns (e.g.,
sensor.victronvenus_battery_voltage)- State class for each sensor type (measurement, total, total_increasing)
62-74: Consider adding future plans sectionThe limitations section is clear, but users would benefit from knowing:
- Which limitations are temporary vs permanent
- Planned features or improvements
- How to contribute to the integration's development
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (1)
source/_integrations/victronvenus.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/victronvenus.markdown
[uncategorized] ~53-~53: Possible missing comma found.
Context: ...ctron Venus device is not automatically detected ensure that MQTT on LAN is enabled. To ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~57-~57: Did you mean: “By default,”?
Context: ...Connect to your device using a browser. By default the device should be available at [htt...
(BY_DEFAULT_COMMA)
🔇 Additional comments (1)
source/_integrations/victronvenus.markdown (1)
1-74: Verify integration configuration against similar integrations
Let's ensure consistency with other energy-related integrations in Home Assistant.
✅ Verification successful
Let me analyze the configuration patterns from similar energy-related integrations and MQTT setup instructions to verify the integration configuration.
Let me check one more aspect regarding the sensor platform configuration.
Based on the analysis of similar energy-related integrations and MQTT configurations, I can now provide a final response.
Configuration is consistent with Home Assistant standards
The Victron Venus integration follows Home Assistant's best practices for MQTT-enabled sensor integrations:
- Correctly uses
ha_config_flow: truefor automatic configuration - Properly categorized as
ha_category: Sensor - Uses
ha_iot_class: "Local Push"which is appropriate for MQTT-based local communication - Includes clear MQTT setup instructions with UPnP/SSDP discovery support
- Documentation structure matches other energy monitoring integrations
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Check configuration patterns in similar integrations
# Find similar energy-related integrations
echo "Similar integrations:"
rg -l "ha_category:.*[Ee]nergy" source/_integrations/
# Check common configuration patterns
echo "\nCommon configuration patterns:"
rg "^ha_" source/_integrations/*energy*.markdown
# Check for MQTT-related setup instructions
echo "\nMQTT setup patterns:"
rg -A 5 "MQTT.*enabled" source/_integrations/*.markdown
Length of output: 72737
Script:
#!/bin/bash
# Check energy-related integrations with MQTT and config_flow
echo "Energy integrations with config_flow and MQTT:"
rg -l "ha_config_flow: true.*ha_category:.*[Ee]nergy" source/_integrations/
# Check ha_platforms in energy integrations
echo "\nPlatforms in energy integrations:"
rg "^ha_platforms:" source/_integrations/*energy*.markdown
# Check ha_integration_type in energy integrations
echo "\nIntegration types:"
rg "^ha_integration_type:" source/_integrations/*energy*.markdown
Length of output: 1982
Script:
#!/bin/bash
# Check sensor platform configurations in similar integrations
echo "Sensor platform configurations:"
rg -A 5 "^ha_category:.*Sensor" source/_integrations/*.markdown
# Check MQTT-enabled sensor integrations
echo "\nMQTT sensor integrations:"
rg -l "MQTT.*sensor" source/_integrations/sensor.mqtt.markdown source/_integrations/mqtt.markdown
Length of output: 54701
🧰 Tools
🪛 LanguageTool
[uncategorized] ~53-~53: Possible missing comma found.
Context: ...ctron Venus device is not automatically detected ensure that MQTT on LAN is enabled. To ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~57-~57: Did you mean: “By default,”?
Context: ...Connect to your device using a browser. By default the device should be available at [htt...
(BY_DEFAULT_COMMA)
| ### Enabling local MQTT on a Victron Venus device | ||
|
|
||
| If your Victron Venus device is not automatically detected ensure that MQTT on | ||
| LAN is enabled. To enable MQTT on your device the following instructions can be | ||
| followed (as tested on a Cerbo GX): | ||
|
|
||
| - Connect to your device using a browser. By default the device should be | ||
| available at [http://venus.local.](http://venus.local./). | ||
| - In the menu navigate to Settings > Services and ensure MQTT on LAN is switched | ||
| on. |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Enhance setup instructions with troubleshooting steps
Consider adding:
- Network requirements and firewall settings
- MQTT broker configuration details (port, authentication if needed)
- Steps to verify successful connection
- Common error messages and their solutions
🧰 Tools
🪛 LanguageTool
[uncategorized] ~53-~53: Possible missing comma found.
Context: ...ctron Venus device is not automatically detected ensure that MQTT on LAN is enabled. To ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~57-~57: Did you mean: “By default,”?
Context: ...Connect to your device using a browser. By default the device should be available at [htt...
(BY_DEFAULT_COMMA)
home-assistant
bot
added
has-parent
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (7)
source/_integrations/victronvenus.markdown (7)
4-5: Consider adding relevant categoriesGiven the integration's functionality, consider adding these additional categories:
ha_category: [Sensor, Energy, Battery, Solar]This will improve discoverability of the integration.
45-46: Fix typo in the note-Not that the Venus settings on the device does not allow you to configure +Note that the Venus settings on the device does not allow you to configure
59-62: Specify units for measurementsPlease specify units for all measurements:
-The AC voltage, current and power for each of the available grid phases. +The AC voltage (V), current (A) and power (W) for each of the available grid phases.
61-62: Clarify the concept of delta valuesThe phrase "only makes sense as delta values" needs more explanation. Consider adding:
to the grid. These figures generally only makes sense as delta values. +Delta values represent the change in measurements between two points in time, useful for calculating consumption over specific periods.
97-97: Add guidance for SSL configurationSince SSL support is untested, consider adding guidance:
-This integration was not tested with MQTT with SSL. +This integration was not tested with MQTT over SSL. If you need secure communication, consider: +- Using a VPN for remote access +- Implementing network segmentation +- Testing SSL configuration in a safe environment before production use🧰 Tools
🪛 Markdownlint (0.37.0)
97-97: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
105-105: Fix ping command-ping venus.local. +ping venus.local
100-115: Enhance troubleshooting sectionConsider adding these common troubleshooting scenarios:
- Device not available at default URL
- MQTT connection refused
- No data received after successful connection
- Common error messages and their solutions
Would you like me to provide detailed content for these scenarios?
🧰 Tools
🪛 Markdownlint (0.37.0)
114-114: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
102-102: Punctuation: ':'
Trailing punctuation in heading(MD026, no-trailing-punctuation)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/victronvenus.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/victronvenus.markdown
[typographical] ~32-~32: It seems that a comma is missing.
Context: ...### Setup in Home Assistant If MQTT is enabled the installation should be picked up au...
(IF_COMMA)
[style] ~41-~41: It’s more common nowadays to write this noun as one word.
Context: ...ort - the default MQTT port is 1883. 3. User name - this is optional and the default is e...
(RECOMMENDED_COMPOUNDS)
[uncategorized] ~41-~41: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...is 1883. 3. User name - this is optional and the default is empty. 4. Password - th...
(COMMA_COMPOUND_SENTENCE_2)
[uncategorized] ~42-~42: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...s empty. 4. Password - this is optional and the default is empty. 5. Use SSL - indi...
(COMMA_COMPOUND_SENTENCE_2)
🪛 Markdownlint (0.37.0)
source/_integrations/victronvenus.markdown
14-14: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
26-26: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
27-27: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
97-97: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
114-114: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
99-99: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
102-102: Punctuation: ':'
Trailing punctuation in heading
(MD026, no-trailing-punctuation)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (1)
source/_integrations/victronvenus.markdown (1)
14-18: Fix formatting and URL issues
- Remove extra spaces at line endings
- Fix malformed URL:
-[http://venus.local.](http://venus.local./). +[http://venus.local](http://venus.local)🧰 Tools
🪛 Markdownlint (0.37.0)
14-14: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
| 3. User name - this is optional and the default is empty. | ||
| 4. Password - this is optional and the default is empty. | ||
| 5. Use SSL - indicates whether the connection should be made via SSL. | ||
|
|
There was a problem hiding this comment.
🛠️ Refactor suggestion
Add security warning about default empty credentials
Please add a security warning about using default empty credentials, especially when the device is exposed to the internet. Consider adding:
3. User name - this is optional and the default is empty.
4. Password - this is optional and the default is empty.
+
+{% warning %}
+Using default empty credentials is not recommended if your device is accessible from the internet.
+Consider implementing network isolation or firewall rules to restrict access to your local network.
+{% endwarning %}📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| 3. User name - this is optional and the default is empty. | |
| 4. Password - this is optional and the default is empty. | |
| 5. Use SSL - indicates whether the connection should be made via SSL. | |
| 3. User name - this is optional and the default is empty. | |
| 4. Password - this is optional and the default is empty. | |
| {% warning %} | |
| Using default empty credentials is not recommended if your device is accessible from the internet. | |
| Consider implementing network isolation or firewall rules to restrict access to your local network. | |
| {% endwarning %} | |
| 5. Use SSL - indicates whether the connection should be made via SSL. |
🧰 Tools
🪛 LanguageTool
[style] ~41-~41: It’s more common nowadays to write this noun as one word.
Context: ...ort - the default MQTT port is 1883. 3. User name - this is optional and the default is e...
(RECOMMENDED_COMPOUNDS)
[uncategorized] ~41-~41: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...is 1883. 3. User name - this is optional and the default is empty. 4. Password - th...
(COMMA_COMPOUND_SENTENCE_2)
[uncategorized] ~42-~42: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...s empty. 4. Password - this is optional and the default is empty. 5. Use SSL - indi...
(COMMA_COMPOUND_SENTENCE_2)
🪛 Markdownlint (0.37.0)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
There was a problem hiding this comment.
Actionable comments posted: 3
🧹 Nitpick comments (4)
source/_integrations/victronvenus.markdown (4)
14-18: Fix formatting inconsistencies in the introduction.There are some minor formatting issues that should be fixed:
-a [Victron Venus OS device](https://www.victronenergy.com/monitoring). - that has local MQTT enabled. This add-on will automatically configure the - integration through UPnP/Simple Service Discovery Protocol if possible. +a [Victron Venus OS device](https://www.victronenergy.com/monitoring) +that has local MQTT enabled. This add-on will automatically configure the +integration through UPnP/Simple Service Discovery Protocol if possible.🧰 Tools
🪛 Markdownlint (0.37.0)
14-14: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
104-117: LGTM! Clear documentation of limitations.The limitations section is well-documented and helps users understand the current constraints of the integration.
-This integration was not tested with MQTT with SSL. +This integration was not tested with MQTT with SSL.🧰 Tools
🪛 Markdownlint (0.37.0)
116-116: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
121-134: Fix formatting in troubleshooting section.-### Verify that the Venus device is visible on your network: +### Verify that the Venus device is visible on your network-Find your serial number under the topic hierarchy e.g. "N/<serial>/system/0/Serial" +Find your serial number under the topic hierarchy (e.g., "N/<serial>/system/0/Serial")🧰 Tools
🪛 LanguageTool
[uncategorized] ~131-~131: Possible missing comma found.
Context: ...Find your serial number under the topic hierarchy e.g. "N//system/0/Serial" 3. Pu...(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
133-133: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
121-121: Punctuation: ':'
Trailing punctuation in heading(MD026, no-trailing-punctuation)
1-134: Overall documentation quality is good.The documentation is well-structured and provides comprehensive coverage of the integration's features, limitations, and setup process. The content follows Home Assistant documentation standards and includes all necessary sections.
Consider adding:
- Examples of sensor values and their units
- Common use cases or automation examples
- Links to related integrations (if any)
🧰 Tools
🪛 LanguageTool
[typographical] ~32-~32: It seems that a comma is missing.
Context: ...### Setup in Home Assistant If MQTT is enabled the installation should be picked up au...(IF_COMMA)
[style] ~41-~41: It’s more common nowadays to write this noun as one word.
Context: ...ort - the default MQTT port is 1883. 3. User name - this is optional and the default is e...(RECOMMENDED_COMPOUNDS)
[uncategorized] ~41-~41: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...is 1883. 3. User name - this is optional and the default is empty. 4. Password - th...(COMMA_COMPOUND_SENTENCE_2)
[uncategorized] ~42-~42: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...s empty. 4. Password - this is optional and the default is empty. 5. Use SSL - indi...(COMMA_COMPOUND_SENTENCE_2)
[grammar] ~53-~53: Possible subject-verb agreement error.
Context: ...dwarning %} The connection typically fail for the following reasons: 1. Device i...(SINGULAR_NOUN_ADV_AGREEMENT)
[uncategorized] ~75-~75: Possible missing comma found.
Context: ...#### Grid Sensors - The number of grid phases e.g. 1 for single-phase, or 3 for three...(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing comma found.
Context: ...r 3 for three-phase. If there is a grid failure then the number of phases will be 0. Th...(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing preposition found.
Context: ...r of phases will be 0. This can be used detect grid failure. - The AC voltage, current...(AI_HYDRA_LEO_MISSING_TO)
[uncategorized] ~131-~131: Possible missing comma found.
Context: ...Find your serial number under the topic hierarchy e.g. "N//system/0/Serial" 3. Pu...(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
14-14: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
26-26: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
27-27: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
49-49: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
116-116: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
133-133: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
60-60: Expected: 1; Actual: 2
Multiple consecutive blank lines(MD012, no-multiple-blanks)
118-118: Expected: 1; Actual: 2
Multiple consecutive blank lines(MD012, no-multiple-blanks)
121-121: Punctuation: ':'
Trailing punctuation in heading(MD026, no-trailing-punctuation)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/victronvenus.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/victronvenus.markdown
[typographical] ~32-~32: It seems that a comma is missing.
Context: ...### Setup in Home Assistant If MQTT is enabled the installation should be picked up au...
(IF_COMMA)
[style] ~41-~41: It’s more common nowadays to write this noun as one word.
Context: ...ort - the default MQTT port is 1883. 3. User name - this is optional and the default is e...
(RECOMMENDED_COMPOUNDS)
[uncategorized] ~41-~41: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...is 1883. 3. User name - this is optional and the default is empty. 4. Password - th...
(COMMA_COMPOUND_SENTENCE_2)
[uncategorized] ~42-~42: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...s empty. 4. Password - this is optional and the default is empty. 5. Use SSL - indi...
(COMMA_COMPOUND_SENTENCE_2)
[grammar] ~53-~53: Possible subject-verb agreement error.
Context: ...dwarning %} The connection typically fail for the following reasons: 1. Device i...
(SINGULAR_NOUN_ADV_AGREEMENT)
[uncategorized] ~75-~75: Possible missing comma found.
Context: ...#### Grid Sensors - The number of grid phases e.g. 1 for single-phase, or 3 for three...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing comma found.
Context: ...r 3 for three-phase. If there is a grid failure then the number of phases will be 0. Th...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing preposition found.
Context: ...r of phases will be 0. This can be used detect grid failure. - The AC voltage, current...
(AI_HYDRA_LEO_MISSING_TO)
[uncategorized] ~131-~131: Possible missing comma found.
Context: ...Find your serial number under the topic hierarchy e.g. "N//system/0/Serial" 3. Pu...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
source/_integrations/victronvenus.markdown
14-14: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
26-26: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
27-27: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
32-32: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
49-49: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
116-116: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
133-133: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
60-60: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
118-118: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
121-121: Punctuation: ':'
Trailing punctuation in heading
(MD026, no-trailing-punctuation)
🔇 Additional comments (3)
source/_integrations/victronvenus.markdown (3)
1-11: LGTM! Metadata configuration looks good.The frontmatter configuration is appropriate for this integration:
- Release version 2025.2 is reasonable for an upcoming release
- Energy category aligns with the integration's purpose
- Local Push and config flow settings are correctly specified
61-66: LGTM! Integration removal section is clear and follows standards.
26-28:⚠️ Potential issueFix malformed URL and improve navigation instructions.
-[http://venus.local.](http://venus.local./). -2. Navigate to Settings > Services and activate MQTT on LAN. +[http://venus.local](http://venus.local) +2. In the menu, navigate to Settings > Services and activate MQTT on LAN.Likely invalid or redundant comment.
🧰 Tools
🪛 Markdownlint (0.37.0)
26-26: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
27-27: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
| Not that the Venus settings on the device does not allow you to configure | ||
| a username and password via the Venus web console. |
There was a problem hiding this comment.
Fix typo in configuration note.
-Not that the Venus settings on the device does not allow you to configure
+Note that the Venus settings on the device do not allow you to configure📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| Not that the Venus settings on the device does not allow you to configure | |
| a username and password via the Venus web console. | |
| Note that the Venus settings on the device do not allow you to configure | |
| a username and password via the Venus web console. |
| The connection typically fail for the following reasons: | ||
|
|
There was a problem hiding this comment.
Fix grammar in error description.
-The connection typically fail for the following reasons:
+The connection typically fails for the following reasons:📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| The connection typically fail for the following reasons: | |
| The connection typically fails for the following reasons: | |
🧰 Tools
🪛 LanguageTool
[grammar] ~53-~53: Possible subject-verb agreement error.
Context: ...dwarning %} The connection typically fail for the following reasons: 1. Device i...
(SINGULAR_NOUN_ADV_AGREEMENT)
| - The number of grid phases e.g. 1 for single-phase, or 3 for three-phase. | ||
| If there is a grid failure then the number of phases will be 0. This can be used | ||
| detect grid failure. |
There was a problem hiding this comment.
Fix grammar in grid sensors description.
-The number of grid phases e.g. 1 for single-phase, or 3 for three-phase.
-If there is a grid failure then the number of phases will be 0. This can be used
-detect grid failure.
+The number of grid phases (e.g., 1 for single-phase, or 3 for three-phase).
+If there is a grid failure, then the number of phases will be 0. This can be used
+to detect grid failure.📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| - The number of grid phases e.g. 1 for single-phase, or 3 for three-phase. | |
| If there is a grid failure then the number of phases will be 0. This can be used | |
| detect grid failure. | |
| The number of grid phases (e.g., 1 for single-phase, or 3 for three-phase). | |
| If there is a grid failure, then the number of phases will be 0. This can be used | |
| to detect grid failure. |
🧰 Tools
🪛 LanguageTool
[uncategorized] ~75-~75: Possible missing comma found.
Context: ...#### Grid Sensors - The number of grid phases e.g. 1 for single-phase, or 3 for three...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing comma found.
Context: ...r 3 for three-phase. If there is a grid failure then the number of phases will be 0. Th...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing preposition found.
Context: ...r of phases will be 0. This can be used detect grid failure. - The AC voltage, current...
(AI_HYDRA_LEO_MISSING_TO)
thecode
removed request for
OttoWinter,
allenporter,
cgarwood,
emontnemery,
epenet,
farmio,
gjohansson-ST,
jbouwh,
jesserockz,
joostlek,
jpbede,
kbx81,
klaasnicolaas,
ochlocracy,
rytilahti,
starkillerOG,
synesthesiam,
thecode,
tronikos and
zweckj
thecode
added
the
needs-rebase
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (12)
source/_integrations/habitica.markdown (1)
416-416: Use asterisks for emphasis markers consistently.Replace underscores with asterisks for emphasis to maintain consistency with the rest of the documentation.
-(_download of debug log file will start automatically_). Further _if still possible_, please also download the [diagnostics](/integrations/diagnostics) data. If you have collected the debug log and the diagnostics data, provide them with the issue report. +(*download of debug log file will start automatically*). Further *if still possible*, please also download the [diagnostics](/integrations/diagnostics) data. If you have collected the debug log and the diagnostics data, provide them with the issue report.🧰 Tools
🪛 Markdownlint (0.37.0)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
source/_integrations/iron_os.markdown (2)
Line range hint
242-243: Use proper markdown for configuration example.Replace HTML details tag with proper markdown syntax for consistency with Home Assistant documentation standards.
-{% details "Example YAML configuration" %} +{% configuration_basic %}
Line range hint
52-56: Add validation information for configuration parameters.The configuration section should include validation information for the "Address" parameter, such as:
- Required/Optional status
- Data type
- Format requirements (if any)
Example structure:
{% configuration %} address: description: The Bluetooth address of the detected IronOS device required: true type: string example: "00:11:22:33:44:55" {% endconfiguration %}source/_integrations/enphase_envoy.markdown (1)
510-510: Consider these minor language improvements.For better readability, consider these corrections:
- Line 510: Add comma: "outages, nor conversion losses"
- Line 516: Replace "off" with "of" in "coming out of the battery"
- Line 547: Add comma: "outages, nor conversion losses"
- Line 682: Add comma: "in multiphase setup, sums"
Also applies to: 516-516, 547-547, 682-682
🧰 Tools
🪛 LanguageTool
[uncategorized] ~510-~510: Possible missing comma found.
Context: ...ates, value changes over Home Assistant outages nor conversion losses. {% enddetails %...(AI_HYDRA_LEO_MISSING_COMMA)
source/_integrations/bluetooth.markdown (2)
Line range hint
138-154: LGTM! Comprehensive list of Broadcom adapters with important warning.The new section is well-structured and includes crucial information about patch file requirements. Consider adding a brief note about the typical performance characteristics of these adapters compared to CSR-based ones.
{% warning %} These adapters may require additional patch files available at <a href="https://github.com/winterheart/broadcom-bt-firmware">https://github.com/winterheart/broadcom-bt-firmware</a> for stable operation. There is currently no supported method to install these patch files when using Home Assistant Operating System. + +Note: When properly configured with patch files, these adapters typically offer performance comparable to CSR-based adapters. {% endwarning %}
Line range hint
223-244: LGTM! Well-documented list of unsupported adapters.The list is comprehensive and provides clear reasons for each adapter's unsupported status. Consider grouping the adapters by issue type (e.g., driver issues, connection problems) to make it easier for users to understand the severity of the limitations.
{% details "Unsupported adapters" %} +#### No Driver Available - Bluegiga BLED112 - No driver available yet for USB ID `2458:0001` - eppfun AK3040G (ATS2851) - No driver available yet for USB ID `10d7:b012` - eppfun AK3040A (ATS2851) - No driver available yet for USB ID `10d7:b012` - QUMOX Bluetooth 5.0 (Barrot 8041A02) - No working driver - UGREEEN CM591 (ATS2851) - No driver available yet for USB ID `10d7:b012` - UGREEEN CM749 (Barrot chipset) 📶 - No driver available yet for USB ID `33fa:0010` + +#### Connection Stability Issues - Alfa AWUS036EACS (RTL8821CU) - Frequent connection failures and drop outs - BASEUS BR8651A01 BA04 - Advertisement drops out - EDIMAX EW-7611ULB (RTL8723BU) - Frequent connection failures and drop outs - EDUP EP-AC1661 (RTL8821CU) - Frequent connection failures and drop outs - KOAMTAC KBD 401G (CSR8510A10) - Adapter is unstable and drops out - TRIPP-LITE CU885A/U261-001-BT4 (CSR8510A10) - Adapter is unstable and drops out - tp-link UB400 (CSR4) - Frequent connection failures with active connections - tp-link UB500 (RTL8761BU) - Frequent connection failures with active connections + +#### Setup Issues - Belkin F8T003 ver 2. - Fails to setup and add successfully + +#### Known Problematic Clones - CSR 4.0 clones with USB ID `0a12:0001` - Unrecoverable driver failure: These clones will usually show a message like `CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...` in the system log when they are plugged in. - Multiple unbranded adapters labeled with CSR 4.0 - 5 CORE CSR 4.0🧰 Tools
🪛 LanguageTool
[misspelling] ~225-~225: This expression is normally spelled as one or with a hyphen.
Context: ...1CU) - Frequent connection failures and drop outs - BASEUS BR8651A01 BA04 - Advertisement...(EN_COMPOUNDS_DROP_OUTS)
Gemfile (1)
13-15: Consider reordering gems alphabetically.For better maintainability, consider reordering the gems alphabetically within their sections:
- Move
rubocopbeforesass-embedded- Move
nokogiribeforesinatraAlso applies to: 27-27
🧰 Tools
🪛 rubocop (1.69.1)
[convention] 14-14: Gems should be sorted in an alphabetical order within their section of the Gemfile. Gem
rubocopshould appear beforesass-embedded.(Bundler/OrderedGems)
source/_includes/integrations/remove_device_service.md (2)
3-3: Good use of DRY principles in documentation.The use of an include directive helps maintain consistency across integration documentation. However, since this is a shared component, consider:
- Adding a comment above the include to track when this change was made
- Documenting this change in the integration changelog
+<!-- Updated in PR #35739 to use centralized steps --> {% include integrations/remove_device_service_steps.md %}🧰 Tools
🪛 Markdownlint (0.37.0)
3-3: null
Files should end with a single newline character(MD047, single-trailing-newline)
3-3: Add missing newline at end of file.To follow markdown best practices and prevent potential issues, add a newline character at the end of the file.
{% include integrations/remove_device_service_steps.md %} +🧰 Tools
🪛 Markdownlint (0.37.0)
3-3: null
Files should end with a single newline character(MD047, single-trailing-newline)
source/_integrations/history_stats.markdown (1)
127-127: LGTM! Clear improvement to the documentation.The change helpfully clarifies that both time and count sensors may need customization for accurate statistics tracking when not using sliding time periods.
Consider adding an example configuration snippet showing how to set the
state_classto make it even clearer for users.source/_includes/common-tasks/backups.md (1)
19-29: Great addition of preparation steps!The new section about checking backup size and database considerations is very helpful for users planning migrations.
Consider adding a note about recommended maximum backup sizes based on common use cases.
source/_integrations/aquacell.markdown (1)
24-26: Consider consistent formatting for app names.While the content is informative, consider using consistent formatting for app names. Both 'Mijn AquaCell' and 'myHarvey' could use the same style (either both with or without quotes).
-configured through the 'Mijn AquaCell' or 'myHarvey' mobile app. +configured through the Mijn AquaCell or myHarvey mobile app.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
⛔ Files ignored due to path filters (2)
Gemfile.lockis excluded by!**/*.lockpackage-lock.jsonis excluded by!**/package-lock.json
📒 Files selected for processing (63)
.github/workflows/stale.yml(1 hunks)CODEOWNERS(13 hunks)Gemfile(2 hunks)_config.yml(1 hunks)package.json(1 hunks)sass/homeassistant/_overrides.scss(1 hunks)sass/homeassistant/base/_navigation.scss(1 hunks)source/_dashboards/button.markdown(1 hunks)source/_docs/automation/condition.markdown(1 hunks)source/_docs/blueprint.markdown(1 hunks)source/_docs/blueprint/tutorial.markdown(2 hunks)source/_docs/configuration.markdown(1 hunks)source/_docs/configuration/state_object.markdown(1 hunks)source/_docs/locked_out.md(2 hunks)source/_docs/scene.markdown(0 hunks)source/_includes/asides/common_tasks_navigation.html(1 hunks)source/_includes/asides/docs_sitemap.html(2 hunks)source/_includes/common-tasks/backups.md(4 hunks)source/_includes/common-tasks/commandline.md(1 hunks)source/_includes/common-tasks/data_disk.md(3 hunks)source/_includes/common-tasks/network_storage.md(2 hunks)source/_includes/common-tasks/specific_version.md(1 hunks)source/_includes/common-tasks/update.md(1 hunks)source/_includes/integrations/remove_device_service.md(1 hunks)source/_includes/integrations/remove_device_service_steps.md(1 hunks)source/_integrations/acaia.markdown(1 hunks)source/_integrations/aemet.markdown(1 hunks)source/_integrations/alexa.smart_home.markdown(3 hunks)source/_integrations/aquacell.markdown(1 hunks)source/_integrations/backup.markdown(2 hunks)source/_integrations/bang_olufsen.markdown(1 hunks)source/_integrations/bluetooth.markdown(6 hunks)source/_integrations/bt_smarthub.markdown(1 hunks)source/_integrations/cambridge_audio.markdown(1 hunks)source/_integrations/cookidoo.markdown(1 hunks)source/_integrations/decora_wifi.markdown(1 hunks)source/_integrations/denonavr.markdown(1 hunks)source/_integrations/discovergy.markdown(2 hunks)source/_integrations/dsmr.markdown(2 hunks)source/_integrations/eastron.markdown(1 hunks)source/_integrations/easyenergy.markdown(2 hunks)source/_integrations/eheimdigital.markdown(1 hunks)source/_integrations/elevenlabs.markdown(1 hunks)source/_integrations/energyzero.markdown(2 hunks)source/_integrations/enphase_envoy.markdown(6 hunks)source/_integrations/esphome.markdown(1 hunks)source/_integrations/flux.markdown(1 hunks)source/_integrations/fronius.markdown(1 hunks)source/_integrations/fyta.markdown(1 hunks)source/_integrations/go2rtc.markdown(1 hunks)source/_integrations/google_generative_ai_conversation.markdown(1 hunks)source/_integrations/google_sheets.markdown(1 hunks)source/_integrations/govee_ble.markdown(0 hunks)source/_integrations/habitica.markdown(1 hunks)source/_integrations/harvey.markdown(1 hunks)source/_integrations/history_stats.markdown(1 hunks)source/_integrations/honeywell.markdown(1 hunks)source/_integrations/husqvarna_automower.markdown(1 hunks)source/_integrations/hvv_departures.markdown(1 hunks)source/_integrations/idasen_desk.markdown(2 hunks)source/_integrations/incomfort.markdown(2 hunks)source/_integrations/iotty.markdown(1 hunks)source/_integrations/iron_os.markdown(2 hunks)
💤 Files with no reviewable changes (2)
- source/_integrations/govee_ble.markdown
- source/_docs/scene.markdown
✅ Files skipped from review due to trivial changes (16)
- source/_integrations/bt_smarthub.markdown
- source/_integrations/google_generative_ai_conversation.markdown
- source/_docs/configuration.markdown
- source/_integrations/cambridge_audio.markdown
- package.json
- source/_integrations/google_sheets.markdown
- source/_integrations/acaia.markdown
- source/_docs/configuration/state_object.markdown
- source/_integrations/cookidoo.markdown
- source/_docs/locked_out.md
- source/_integrations/husqvarna_automower.markdown
- source/_integrations/flux.markdown
- source/_integrations/denonavr.markdown
- source/_integrations/fronius.markdown
- source/_integrations/go2rtc.markdown
- source/_integrations/harvey.markdown
🧰 Additional context used
🪛 Markdownlint (0.37.0)
source/_includes/integrations/remove_device_service_steps.md
1-1: null
First line in a file should be a top-level heading
(MD041, first-line-heading, first-line-h1)
source/_integrations/habitica.markdown
416-416: Expected: asterisk; Actual: underscore
Emphasis style
(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style
(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style
(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style
(MD049, emphasis-style)
source/_integrations/alexa.smart_home.markdown
326-326: null
Link fragments should be valid
(MD051, link-fragments)
source/_integrations/enphase_envoy.markdown
45-45: null
Link fragments should be valid
(MD051, link-fragments)
196-196: null
Link fragments should be valid
(MD051, link-fragments)
205-205: null
Link fragments should be valid
(MD051, link-fragments)
214-214: null
Link fragments should be valid
(MD051, link-fragments)
source/_includes/integrations/remove_device_service.md
3-3: null
Files should end with a single newline character
(MD047, single-trailing-newline)
🪛 rubocop (1.69.1)
Gemfile
[convention] 14-14: Gems should be sorted in an alphabetical order within their section of the Gemfile. Gem rubocop should appear before sass-embedded.
(Bundler/OrderedGems)
[convention] 27-27: Gems should be sorted in an alphabetical order within their section of the Gemfile. Gem nokogiri should appear before sinatra.
(Bundler/OrderedGems)
🪛 LanguageTool
source/_integrations/bang_olufsen.markdown
[typographical] ~74-~74: It seems that a comma is missing after this introductory phrase.
Context: ... become available at a later point, but until then the [Bang & Olufsen App](https://www.ba...
(SINCE_THEN_COMMA)
source/_includes/common-tasks/backups.md
[style] ~45-~45: As an alternative to the over-used intensifier ‘quite’, consider replacing this phrase.
Context: ... restore. - Some add-ons may also be quite large. 7. [Define the location for backups](#...
(EN_WEAK_ADJECTIVE)
[style] ~75-~75: As an alternative to the over-used intensifier ‘quite’, consider replacing this phrase.
Context: ... restore. - Some add-ons may also be quite large. 4. Provide a name for the backup. 5. C...
(EN_WEAK_ADJECTIVE)
[uncategorized] ~188-~188: Use a comma before ‘and’ if it connects two independent clauses (unless they are closely connected and short).
Context: ...- You will lose the connection to the UI and it will return once the restart is comp...
(COMMA_COMPOUND_SENTENCE)
source/_integrations/enphase_envoy.markdown
[uncategorized] ~510-~510: Possible missing comma found.
Context: ...ates, value changes over Home Assistant outages nor conversion losses. {% enddetails %...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~516-~516: “off” (as in: go/turn off, off the coast) seems less likely than “of”.
Context: ... into the battery and Energy coming out off the battery. This method does not accou...
(AI_HYDRA_LEO_CP_OFF_OF)
[uncategorized] ~516-~516: Possible missing comma found.
Context: ... method does not account for conversion losses as Energy content changes do not exactl...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~547-~547: Possible missing comma found.
Context: ...ates, value changes over Home Assistant outages nor conversion losses. {% enddetails %...
(AI_HYDRA_LEO_MISSING_COMMA)
[grammar] ~658-~658: A determiner may be missing.
Context: ...minutes have been reported. In this case, best use a utility meter with the `Lifetime ...
(THE_SUPERLATIVE)
[grammar] ~664-~664: A determiner may be missing.
Context: ... spikes have been reported. In this case, best use a utility meter with the `Lifetime ...
(THE_SUPERLATIVE)
[uncategorized] ~682-~682: Possible missing comma found.
Context: ... enddetails %} ### Summed Voltage The Envoy Metered in multiphase setup, sums the v...
(AI_HYDRA_LEO_MISSING_COMMA)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (83)
sass/homeassistant/base/_navigation.scss (1)
155-155: LGTM! Improved mobile menu height calculation.The change to
calc(100vh - 68px)correctly accounts for the header height, preventing the menu from overlapping with the header when scrolling on mobile devices. This enhancement improves the navigation experience for users accessing the documentation, including the new Victron Venus integration docs.source/_integrations/hvv_departures.markdown (1)
78-78: LGTM! Documentation improvement for API credential acquisition.The simplified process description makes it clearer and easier for users to understand how to obtain API credentials.
source/_integrations/habitica.markdown (1)
412-417: Great addition of the troubleshooting section!The new section provides valuable guidance for users experiencing issues, with a nice touch of RPG-themed language that fits Habitica's style. The content is well-structured and includes essential information about network connectivity, service status, and proper issue reporting procedures.
🧰 Tools
🪛 Markdownlint (0.37.0)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
416-416: Expected: asterisk; Actual: underscore
Emphasis style(MD049, emphasis-style)
source/_integrations/idasen_desk.markdown (4)
15-15: LGTM! Integration type change is appropriate.The change from
integrationtodevicecorrectly reflects that this integration represents a physical device rather than a service or data integration.
20-20: LGTM! Product link enhances documentation.Adding the link to the IKEA Idåsen product page improves user experience by providing quick access to product information.
51-55: LGTM! Removal instructions are clear and follow standards.The added removal section follows Home Assistant's documentation standards by:
- Clearly stating that no special steps are needed
- Including the standard removal device service template
Line range hint
1-55: Verify PR objectives alignment.This PR appears to be modifying the IKEA Idasen Desk integration documentation, but the PR objectives state this is for "Initial Victron Venus documentation". Please verify if this is the correct PR or if there are missing files for review.
source/_integrations/eastron.markdown (1)
21-21: LGTM! Addition of DHCP support metadata.The addition of
ha_dhcp: trueis properly formatted and aligns with the integration's existing network discovery capabilities via Zeroconf.source/_integrations/fyta.markdown (1)
16-17: LGTM! Quality scale and DHCP support metadata added.Both additions are valid and properly formatted:
ha_quality_scale: platinumappropriately indicates the integration's high quality levelha_dhcp: truecorrectly specifies DHCP supportsource/_integrations/backup.markdown (3)
14-19: Documentation links have been appropriately updated.The links now point to more general documentation paths that are applicable across all installation types, improving accessibility.
22-22: Clear and inclusive description of backup functionality.The documentation now correctly indicates that the backup integration is available for all installation types, making it more accessible and accurate.
Also applies to: 24-24
31-31: Good recommendation for using UI-based automation.The guidance to use UI-based automatic backup setup aligns with Home Assistant's modern practices and improves user experience.
source/_integrations/esphome.markdown (1)
21-21: New platform 'assist_satellite' added correctly.The platform has been added to the ha_platforms list following the existing format and naming conventions.
source/_integrations/aemet.markdown (1)
13-13: New platform 'image' added correctly.The platform has been added to the ha_platforms list following the existing format and naming conventions.
source/_integrations/honeywell.markdown (3)
17-17: New platform 'humidifier' added correctly.The platform has been added to the ha_platforms list following the existing format and naming conventions.
Line range hint
117-159: Well-documented humidifier section with clear examples.The humidifier section is comprehensive, including:
- Clear list of available actions
- Practical configuration example
- Link to the main humidifier integration documentation
Line range hint
1-1: Verify completeness of PR files.The PR objectives mention adding Victron Venus integration documentation, but the
victronvenus.markdownfile is not included in the files for review. Please ensure all relevant files are included in the review.source/_integrations/iron_os.markdown (2)
5-7: LGTM! Categories and platforms are properly aligned.The additions of Binary sensor and Select categories/platforms are consistent and properly ordered alphabetically.
Also applies to: 18-20
11-11: Verify the release version.The release version "2024.8" seems incorrect as it's too far in the future. Please verify and update to the correct version.
source/_integrations/enphase_envoy.markdown (6)
45-47: LGTM! Clear prerequisites documentation.The additions improve clarity by explicitly stating network requirements and version-specific prerequisites.
🧰 Tools
🪛 Markdownlint (0.37.0)
45-45: null
Link fragments should be valid(MD051, link-fragments)
62-63: LGTM! Clear authentication requirements.The expanded description clearly explains version-specific username requirements and token management.
79-84: LGTM! Well-documented reconfiguration process.The new section clearly explains when and how to use the reconfiguration option.
93-99: LGTM! Clear terminology and conventions.The updates improve clarity by explaining product terminology and serial number conventions.
642-655: LGTM! Important firmware limitations documented.The section clearly documents firmware-related changes and current limitations, particularly the loss of battery control features.
690-693: LGTM! Clear network troubleshooting guidance.The section provides clear guidance on resolving periodic network connection issues.
source/_integrations/bluetooth.markdown (2)
94-95: LGTM! Good addition of developer-focused information.The addition of the recommended development adapter with a datasheet link provides valuable guidance for developers and contributors.
194-194: LGTM! Clear and actionable warning.The updated warning effectively communicates both the technical limitation and the required user action.
source/_integrations/decora_wifi.markdown (2)
18-18: LGTM! Product URL successfully updated.The new URL correctly points to the smart switches product category on the Leviton website.
22-24: Verify accessibility of device URLs.The device list updates look good with consistent formatting and clear descriptions. Let's verify that all URLs are accessible.
Also applies to: 26-27
✅ Verification successful
All device URLs are accessible and valid
All product links return successful responses (HTTP 200), confirming they are properly configured and accessible.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check if all device URLs are accessible urls=( "https://leviton.com/products/dw6hd-1bz" "https://leviton.com/products/dw15p-1bw" "https://leviton.com/products/dw15s-1bz" "https://store.leviton.com/products/decora-smart-wi-fi-switch-2nd-gen-d215s-2rw" "https://leviton.com/products/dn15s-1bw" "https://leviton.com/products/mlwsb-1bw" "https://leviton.com/products/d2msd-1bw" ) for url in "${urls[@]}"; do echo "Checking $url" curl -s -L -o /dev/null -w "%{http_code}" "$url" echo doneLength of output: 2030
CODEOWNERS (3)
164-164: New integration owners added.The following new integrations have been assigned owners:
- cookidoo: @miaucl
- eheimdigital: @autinerd
- ituran: @shmuelzon
- ohme: @dan-r
- watergate: @adam-the-hero
- powerfox: @klaasnicolaas
- zabbix: @kruton
Also applies to: 227-227, 433-433, 602-602, 656-656, 820-820, 999-999
334-334: Owner removals processed.The following integrations have had owners removed:
- govee_ble: Removed @PierreAronnax
- iotty: Replaced @pburgio with @shapournemati-iotty
Also applies to: 419-419
609-609: Owner additions processed.The following integrations have had owners added:
- onkyo: Added @eclair4151
- statistics: Added @gjohansson-ST
Also applies to: 820-820
source/_includes/integrations/remove_device_service_steps.md (1)
1-3: Clear and well-structured device removal steps.The instructions are concise and use proper UI elements (icons and links) to guide users.
🧰 Tools
🪛 Markdownlint (0.37.0)
1-1: null
First line in a file should be a top-level heading(MD041, first-line-heading, first-line-h1)
Gemfile (1)
13-15: Gem versions updated.The following gems have been updated:
- sass-embedded: 1.83.4
- rubocop: 1.71.0
- ruby-lsp: 0.23.6
- nokogiri: 1.18.2
Also applies to: 27-27
🧰 Tools
🪛 rubocop (1.69.1)
[convention] 14-14: Gems should be sorted in an alphabetical order within their section of the Gemfile. Gem
rubocopshould appear beforesass-embedded.(Bundler/OrderedGems)
.github/workflows/stale.yml (1)
14-14: GitHub Action version updated.Updated actions/stale from v9.0.0 to v9.1.0.
source/_integrations/eheimdigital.markdown (1)
15-16: LGTM! Quality scale and Zeroconf attributes added correctly.The new attributes properly document the integration's quality level and network discovery capabilities.
source/_integrations/discovergy.markdown (3)
32-37: LGTM! Configuration fields added with clear descriptions.The email and password configuration fields are well-documented with appropriate descriptions.
49-54: LGTM! Standard removal section added.The removal section follows the documentation standards and includes the appropriate reference to the removal service documentation.
Line range hint
1-14: Verify integration naming consistency.The integration is named "inexogy" but uses the domain "discovergy". This might confuse users. Consider aligning the naming or adding a note explaining the discrepancy.
🧰 Tools
🪛 LanguageTool
[misspelling] ~29-~29: Use “an” instead of ‘a’ if the following word starts with a vowel sound, e.g. ‘an article’, ‘an hour’.
Context: ...r this {% term integration %}, you need a inexogy smart meter, a [inexogy account...(EN_A_VS_AN)
source/_includes/common-tasks/specific_version.md (1)
23-23: LGTM! Link updated to more general backup documentation.The link update improves accessibility by pointing to the general backup documentation instead of OS-specific instructions.
source/_integrations/elevenlabs.markdown (1)
50-55: LGTM! Standard removal section added.The removal section follows the documentation standards and includes the appropriate reference to the removal service documentation.
source/_includes/common-tasks/update.md (1)
3-7: LGTM! Backup instructions enhanced with important details.The backup instructions have been improved with:
- Clear links to backup functionality
- Reference to the backup emergency kit
- Instructions for restoration
- Proper step numbering
source/_integrations/iotty.markdown (4)
43-45: LGTM! Product links updated for EU version smart switches.The links and descriptions for E1 PLUS, E2 PLUS, and i3 PLUS smart switches are accurate and well-documented.
49-50: LGTM! Product links updated for smart shades switches.The links and descriptions for E2S PLUS and i3S PLUS smart shades switches are accurate and well-documented.
52-56: LGTM! New section added for smart outlets.The new section for iotty Outlet products with links to OiT PLUS, ODE PLUS, and OFR PLUS smart outlets is well-structured and complete.
64-64: LGTM! Updated switch entity description.The description now correctly includes both light switches and outlet switches.
source/_integrations/incomfort.markdown (5)
24-24: LGTM! Added reference to client library.The link to the incomfort client library provides valuable context for developers.
26-26: LGTM! Enhanced gateway compatibility description.The detailed explanation of gateway compatibility with various Intergas appliances and thermostats is helpful for users.
38-38: LGTM! Clarified thermostat behavior.The description now clearly explains how temperature overrides work with the thermostat's schedule.
44-46: LGTM! Added data updates section.The new section clearly explains the update frequency and potential delay in target temperature updates.
48-52: LGTM! Added integration removal section.The new section provides clear instructions for removing the integration and includes the standard removal service template.
source/_includes/common-tasks/network_storage.md (3)
59-59: LGTM! Clarified domain account format.The description now includes the User Principal Name format with a clear example.
74-74: LGTM! Updated backup usage type description.The description now correctly covers both automatic and manual backup scenarios.
81-91: LGTM! Enhanced backup location change instructions.The instructions are now clearer with:
- Updated section title
- Step-by-step guidance
- Added troubleshooting note
source/_includes/common-tasks/commandline.md (2)
104-104: LGTM! Fixed section title.Removed duplicate word "wipe" from the title.
112-117: LGTM! Added device-specific reset instructions.Clear instructions for different Home Assistant devices:
- Yellow with CM5: Use command line
- Yellow with CM4: Use red button
- Green: Use black button
source/_includes/common-tasks/data_disk.md (2)
28-28: LGTM! Added data transfer duration note.The note helps set user expectations about the data transfer process.
68-68: LGTM! Updated backup documentation links.The links now correctly point to the general backup documentation section.
Also applies to: 79-79
_config.yml (1)
109-112: LGTM! Version updates for the new release.The version numbers and release date are correctly updated for the January 2025 release.
source/_dashboards/button.markdown (1)
Line range hint
159-199: LGTM! Well-structured button card example.The example provides a clear demonstration of:
- Vertical stack with entity selector and horizontal button arrangement
- Consistent button configuration with proper actions and display settings
- Matches the provided screenshot perfectly
source/_integrations/energyzero.markdown (1)
15-15: LGTM! Integration type correctly updated to service.The change from
integrationtoserviceaccurately reflects the nature of the EnergyZero integration as a service-based component.source/_integrations/dsmr.markdown (2)
57-58: LGTM! Improved meter list accuracy.Fixed DSMR spelling and added the E360 model to supported meters list.
68-69: LGTM! Added important E360 cable requirement note.The remark about the E360 requiring a special P1 cable is valuable information for users.
source/_integrations/easyenergy.markdown (2)
16-16: LGTM! Integration type correctly updated to service.The change from
integrationtoservicealigns with the integration's service-based nature.
231-231: LGTM! Improved markdown formatting.Added proper newline before the include statement for better readability.
sass/homeassistant/_overrides.scss (1)
1133-1137: LGTM! Good responsive table implementation.The changes improve table responsiveness by:
- Using
display: blockfor better control- Adding
overflow-x: autofor horizontal scrolling- Setting
width: fit-contentwithmax-width: 100%for proper sizingsource/_includes/integrations/remove_device_service.md (1)
3-3: Verify that the referenced file exists.Please ensure that
remove_device_service_steps.mdexists in thesource/_includes/integrations/directory.✅ Verification successful
Referenced file exists and contains valid documentation steps
The file
remove_device_service_steps.mdexists and contains proper documentation steps for removing device services, making this include directive valid and functional.🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check if the referenced file exists and show its contents if [ -f "source/_includes/integrations/remove_device_service_steps.md" ]; then echo "File exists. Contents:" cat "source/_includes/integrations/remove_device_service_steps.md" else echo "Error: Referenced file does not exist!" fiLength of output: 491
🧰 Tools
🪛 Markdownlint (0.37.0)
3-3: null
Files should end with a single newline character(MD047, single-trailing-newline)
source/_includes/common-tasks/backups.md (3)
3-5: LGTM! Clear and improved introduction.The introduction effectively emphasizes the importance of backups and provides clear context about encryption and storage.
31-49: Well-structured automatic backup section.Clear step-by-step instructions for setting up automatic backups with good explanations of each option.
🧰 Tools
🪛 LanguageTool
[style] ~45-~45: As an alternative to the over-used intensifier ‘quite’, consider replacing this phrase.
Context: ... restore. - Some add-ons may also be quite large. 7. [Define the location for backups](#...(EN_WEAK_ADJECTIVE)
50-57: Good addition of backup location information.The section effectively explains the importance of off-site backups and clearly describes the Home Assistant Cloud backup feature.
source/_integrations/bang_olufsen.markdown (1)
74-74: LGTM! Clearer explanation of API limitations.The change better explains the relationship between features and the public API, with a helpful link to the API documentation.
🧰 Tools
🪛 LanguageTool
[typographical] ~74-~74: It seems that a comma is missing after this introductory phrase.
Context: ... become available at a later point, but until then the [Bang & Olufsen App](https://www.ba...(SINCE_THEN_COMMA)
source/_integrations/alexa.smart_home.markdown (2)
154-154: LGTM! Added Portuguese (BR) support.Clear addition of Portuguese (BR) to the supported languages for the US East region.
259-259: LGTM! Clarified client ID requirements.The change clearly specifies which client ID to use for US and BR regions.
source/_includes/asides/common_tasks_navigation.html (1)
5-5: LGTM! Improved navigation hierarchy.Moving "Installation independent" to the first position follows good UX practices by presenting general information before installation-specific details.
source/_docs/automation/condition.markdown (1)
6-6: LGTM! Enhanced clarity of automation conditions.The updated text better explains that all conditions must return true for the automation to execute, making the AND relationship between conditions explicit.
source/_docs/blueprint.markdown (1)
25-26: LGTM! Valuable addition about blueprint inheritance.The new paragraph clearly explains how changes to blueprints affect automations and provides practical guidance for reloading automations.
source/_docs/blueprint/tutorial.markdown (1)
196-196: Verify YAML indentation for device_class filter.The indentation change for
device_class: motionmight affect the YAML structure. Please verify that this indentation level correctly represents the filter configuration.Run this script to validate the YAML structure:
yaml")[1].split("```")[0]
try:
yaml.safe_load(yaml_block)
print("YAML structure is valid")
except yaml.YAMLError as e:
print("YAML validation error:", e)
'Also applies to: 227-227 <details> <summary>✅ Verification successful</summary> <!-- [monologue] [task verify_yaml_2/2] [observations] - Found two instances of the YAML structure - Both show consistent indentation pattern - The YAML structure appears to be: * selector * entity * filter * - domain: binary_sensor * device_class: motion [analysis] - The indentation is correct and consistent - It follows proper YAML hierarchy - The structure makes sense for a Home Assistant blueprint - Both instances show identical indentation patterns - The indentation aligns with the parent-child relationship of the configuration [actions] Generate final response confirming the correct indentation --> **YAML indentation is correct and consistent** The indentation for `device_class: motion` is properly aligned with its parent `domain: binary_sensor` within the filter configuration. The YAML structure is valid and follows the correct hierarchy for Home Assistant blueprint selectors. </details> <details> <summary>🏁 Scripts executed</summary> The following scripts were executed for the analysis: Script: ```shell #!/bin/bash # Description: Validate YAML structure python3 -c ' import yaml with open("source/_docs/blueprint/tutorial.markdown", "r") as f: content = f.read() # Extract YAML block between triple backticks yaml_block = content.split("Length of output: 116
Script:
#!/bin/bash # First, let's see the content around the specified line cat source/_docs/blueprint/tutorial.markdown | grep -A 10 -B 10 "device_class: motion"Length of output: 1334
source/_includes/asides/docs_sitemap.html (2)
189-189: LGTM! Consistent navigation structure.
The link update to /common-tasks/general/ aligns with the navigation changes in common_tasks_navigation.html.
Also applies to: 192-192
282-282: LGTM! Added new hardware option.
Addition of Home Assistant Voice Preview Edition to the hardware section improves product visibility.
source/_integrations/aquacell.markdown (4)
17-18: Well-structured device description with proper references!
Good use of external links and Home Assistant term templating.
20-21: Excellent clarification of brand relationships and compatibility!
Clear explanation of the relationship between different brands and proper linking to manufacturer websites.
27-29: Good addition of TwinTec Cobalt with proper linking!
The new device entry maintains consistent formatting with existing entries.
Line range hint 1-100: Verify integration capabilities match documentation.
The documentation appears complete and well-structured. However, let's verify that all documented features match the actual integration capabilities.
home-assistant
bot
removed
the
needs-rebase
There was a problem hiding this comment.
Actionable comments posted: 1
♻️ Duplicate comments (3)
source/_integrations/victronvenus.markdown (3)
45-46:⚠️ Potential issueCorrect Typo in Configuration Note
The phrase "Not that the Venus settings..." is incorrect. It should read "Note that the Venus settings...". Fixing this typo improves clarity. For example:
-Not that the Venus settings on the device does not allow you to configure +Note that the Venus settings on the device do not allow you to configure
26-28:⚠️ Potential issueFix Malformed URL
The URL at line 27 contains an extraneous trailing period. This may result in a broken link. Please update it as shown below:
-[http://venus.local.](http://venus.local./) +[http://venus.local](http://venus.local)🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
26-26: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
27-27: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
53-59:⚠️ Potential issueFix Grammar in Connection Failure Description
The sentence "The connection typically fail for the following reasons:" contains a subject-verb agreement error. It should be "fails." Also, consider inserting a comma in the clause regarding unstable connections. For example:
-The connection typically fail for the following reasons: +The connection typically fails for the following reasons:And,
-For unstable connections using the IP address of the device can alleviate the problem. +For unstable connections, using the IP address of the device can alleviate the problem.🧰 Tools
🪛 LanguageTool
[grammar] ~53-~53: Possible subject-verb agreement error.
Context: ...dwarning %} The connection typically fail for the following reasons: 1. Device i...(SINGULAR_NOUN_ADV_AGREEMENT)
[uncategorized] ~57-~57: Possible missing comma found.
Context: ...use name look-up failures. For unstable connections using the IP address of the device can ...(AI_HYDRA_LEO_MISSING_COMMA)
🧹 Nitpick comments (5)
source/_integrations/victronvenus.markdown (5)
14-18: Improve Introduction ClarityThe introductory text is split across multiple lines, which can affect readability. Consider merging or rephrasing the sentences to form a clearer paragraph.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
14-14: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
23-25: Enhance Prerequisites DescriptionConsider adding a comma for readability. For example:
"To configure it on your device, the following steps can be followed:"
[minor]🧰 Tools
🪛 LanguageTool
[uncategorized] ~24-~24: Possible missing comma found.
Context: ...MQTT interface. To configure it on your device the following steps can be followed: 1...(AI_HYDRA_LEO_MISSING_COMMA)
32-37: Clarify Setup in Home Assistant InstructionsThe instructions in this block can be made clearer. Consider adding a comma after "enabled" and rephrasing the sentence at line 36 to avoid the repetition of "add the integration manually."
🧰 Tools
🪛 LanguageTool
[typographical] ~32-~32: It seems that a comma is missing.
Context: ...### Setup in Home Assistant If MQTT is enabled the installation should be picked up au...(IF_COMMA)
🪛 markdownlint-cli2 (0.17.2)
32-32: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
71-77: Correct Sensor Description and Grid Sensors Details
- The heading "List of exposes sensors" should be corrected to "List of exposed sensors."
- In the grid sensors description, add a comma in the example (e.g., "e.g., 1 for single-phase") and fix the sentence to read "This can be used to detect grid failure." For example:
-List of exposes sensors +List of exposed sensors-If there is a grid failure then the number of phases will be 0. This can be used -detect grid failure. +If there is a grid failure then the number of phases will be 0. This can be used to detect grid failure.🧰 Tools
🪛 LanguageTool
[uncategorized] ~75-~75: Possible missing comma found.
Context: ...#### Grid Sensors - The number of grid phases e.g. 1 for single-phase, or 3 for three...(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing comma found.
Context: ...r 3 for three-phase. If there is a grid failure then the number of phases will be 0. Th...(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing preposition found.
Context: ...r of phases will be 0. This can be used detect grid failure. - The AC voltage, current...(AI_HYDRA_LEO_MISSING_TO)
112-116: Improve Limitations Text ClarityReview the sentences in this section for smooth flow. In particular, consider combining broken lines about generators and rephrasing the sentence that splits over lines 114–115 to avoid a run-on sentence.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
116-116: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/victronvenus.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/victronvenus.markdown
[uncategorized] ~24-~24: Possible missing comma found.
Context: ...MQTT interface. To configure it on your device the following steps can be followed: 1...
(AI_HYDRA_LEO_MISSING_COMMA)
[typographical] ~32-~32: It seems that a comma is missing.
Context: ...### Setup in Home Assistant If MQTT is enabled the installation should be picked up au...
(IF_COMMA)
[style] ~41-~41: It’s more common nowadays to write this noun as one word.
Context: ...ort - the default MQTT port is 1883. 3. User name - this is optional and the default is e...
(RECOMMENDED_COMPOUNDS)
[uncategorized] ~41-~41: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...is 1883. 3. User name - this is optional and the default is empty. 4. Password - th...
(COMMA_COMPOUND_SENTENCE_2)
[uncategorized] ~42-~42: Use a comma before “and” if it connects two independent clauses (unless they are closely connected and short).
Context: ...s empty. 4. Password - this is optional and the default is empty. 5. Use SSL - indi...
(COMMA_COMPOUND_SENTENCE_2)
[grammar] ~53-~53: Possible subject-verb agreement error.
Context: ...dwarning %} The connection typically fail for the following reasons: 1. Device i...
(SINGULAR_NOUN_ADV_AGREEMENT)
[uncategorized] ~57-~57: Possible missing comma found.
Context: ...use name look-up failures. For unstable connections using the IP address of the device can ...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~75-~75: Possible missing comma found.
Context: ...#### Grid Sensors - The number of grid phases e.g. 1 for single-phase, or 3 for three...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing comma found.
Context: ...r 3 for three-phase. If there is a grid failure then the number of phases will be 0. Th...
(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~76-~76: Possible missing preposition found.
Context: ...r of phases will be 0. This can be used detect grid failure. - The AC voltage, current...
(AI_HYDRA_LEO_MISSING_TO)
🪛 markdownlint-cli2 (0.17.2)
source/_integrations/victronvenus.markdown
14-14: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
26-26: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
27-27: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
32-32: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
41-41: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
49-49: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
60-60: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
116-116: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
118-118: Multiple consecutive blank lines
Expected: 1; Actual: 2
(MD012, no-multiple-blanks)
121-121: Trailing punctuation in heading
Punctuation: ':'
(MD026, no-trailing-punctuation)
133-133: Trailing spaces
Expected: 0 or 2; Actual: 1
(MD009, no-trailing-spaces)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (4)
source/_integrations/victronvenus.markdown (4)
1-12: Validate Front Matter MetadataVerify that the release version
"2025.3"is intentional and in line with the “next” release expectations. Also, confirm that the category"Energy"is a recognized and appropriate category for this integration.
48-51: Security Warning Block is Well-FormedThe inclusion of the warning regarding default empty credentials is a good addition for security. The formatting matches our guidelines.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
49-49: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
61-66: Integration Removal Section Looks StandardThe removal instructions, including the Jinja include, follow the standard procedure for integration removal. No changes are required here.
127-135: Confirm MQTT Troubleshooting ClarityThe MQTT troubleshooting steps are clear. One small suggestion: in the instruction for finding the serial number (line 131), consider adding a comma after "e.g.," for better readability.
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
133-133: Trailing spaces
Expected: 0 or 2; Actual: 1(MD009, no-trailing-spaces)
| ### Verify that the Venus device is visible on your network: | ||
|
|
||
| ```bash | ||
| ping venus.local. | ||
| ``` |
There was a problem hiding this comment.
Refine Advanced Troubleshooting Heading and Ping Command
- Remove the trailing colon from the heading "### Verify that the Venus device is visible on your network:" to comply with markdownlint guidelines.
- In the ping command (line 124), remove the trailing period from
"venus.local."so that it reads simplyvenus.local. For example:
-### Verify that the Venus device is visible on your network:
+### Verify that the Venus device is visible on your network-ping venus.local.
+ping venus.local📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| ### Verify that the Venus device is visible on your network: | |
| ```bash | |
| ping venus.local. | |
| ``` | |
| ### Verify that the Venus device is visible on your network | |
🧰 Tools
🪛 markdownlint-cli2 (0.17.2)
121-121: Trailing punctuation in heading
Punctuation: ':'
(MD026, no-trailing-punctuation)
|
Closing PR as the parent PR has been closed. |
4 participants
Proposed change
Documentation for a new integration - Victron Venus.
**Integration PR: ** home-assistant/core#130505
Type of change
currentbranch).currentbranch).nextbranch).nextbranch).Additional information
Checklist
currentbranch.nextbranch.Summary by CodeRabbit