Shift595Lib

This library is made for using the 74HC595 Shift Register, mainly used to drive led and signals using only few pins

Description

With this library you can

• write to the register, even with cascaded registers
• Enable and Disable the output
• Reset the Register

Simple Usage

This library requires atleast 3 pin which are Data, Shift Clock and Latch Clock to write the registers.

Extended Usage

You can also connect the output enable and reset direclty to the arduino, but they are not mandatory. You can leave empty the parameters of the functions using OE and RST if you don't need then Example:
shift.begin(3, 2);//<-With parameters
shift.begin();//<- without Parameters
WARNING: First write after reset won't work properly.
Check the Example for more details!