PR 364 review (armed_board_variant Armed V1)

variants/ARMED_V1/ldscript.ld

@@ -18,13 +18,32 @@
 **  Distribution: The file is distributed as is, without any warranty
 **                of any kind.
 **
-**  (c)Copyright Ac6.
-**  You may use this file as-is or modify it according to the needs of your
-**  project. Distribution of this file (unmodified or modified) is not
-**  permitted. Ac6 permit registered System Workbench for MCU users the
-**  rights to distribute the assembled, compiled & linked contents of this
-**  file as part of an application binary file, provided that it is built
-**  using the System Workbench for MCU toolchain.
+*****************************************************************************
+** @attention
+**
+** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**   1. Redistributions of source code must retain the above copyright notice,
+**      this list of conditions and the following disclaimer.
+**   2. Redistributions in binary form must reproduce the above copyright notice,
+**      this list of conditions and the following disclaimer in the documentation
+**      and/or other materials provided with the distribution.
+**   3. Neither the name of Ac6 nor the names of its contributors
+**      may be used to endorse or promote products derived from this software
+**      without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 **
 *****************************************************************************
 */

variants/ARMED_V1/variant.cpp

@@ -41,53 +41,53 @@ const PinName digitalPin[] = {
   PA_14, //D14
   PA_15, //D15
   PB_0,  //D16
-  PB_1, //D17
-  PB_2, //D18
-  PB_3, //D19
+  PB_1,  //D17
+  PB_2,  //D18
+  PB_3,  //D19
   PB_4,  //D20
-  PB_5, //D21
+  PB_5,  //D21
   PB_6,  //D22
   PB_7,  //D23
   PB_8,  //D24
   PB_9,  //D25
-  PB_10,  //D26
-  PB_11,  //D27
-  PB_12,  //D28
-  PB_13,  //D29
-  PB_14,  //D30
-  PB_15,  //D31
-  PC_0,  //D32
-  PC_1, //D33
-  PC_2, //D34
-  PC_3, //D35
+  PB_10, //D26
+  PB_11, //D27
+  PB_12, //D28
+  PB_13, //D29
+  PB_14, //D30
+  PB_15, //D31
+  PC_0,  //D32/A0
+  PC_1,  //D33/A1
+  PC_2,  //D34/A2
+  PC_3,  //D35
   PC_4,  //D36
   PC_5,  //D37
   PC_6,  //D38
   PC_7,  //D39
   PC_8,  //D40
   PC_9,  //D41
-  PC_10,  //D42
-  PC_11,  //D43
-  PC_12,  //D44
-  PC_13,  //D45
-  PC_14,  //D46
-  PC_15,  //D47
+  PC_10, //D42
+  PC_11, //D43
+  PC_12, //D44
+  PC_13, //D45
+  PC_14, //D46
+  PC_15, //D47
   PD_0,  //D48
-  PD_1, //D49
-  PD_2, //D50
-  PD_3, //D51
-  PD_4, //D52
-  PD_5, //D53
-  PD_6, //D54
+  PD_1,  //D49
+  PD_2,  //D50
+  PD_3,  //D51
+  PD_4,  //D52
+  PD_5,  //D53
+  PD_6,  //D54
   PD_7,  //D55
-  PD_8, //D56
-  PD_9, //D57
+  PD_8,  //D56
+  PD_9,  //D57
   PD_10, //D58
-  PD_11,  //D59
+  PD_11, //D59
   PD_12, //D60
   PD_13, //D61
-  PD_14,  //D62
-  PD_15,  //D63
+  PD_14, //D62
+  PD_15, //D63
   PE_0,  //D64
   PE_1,  //D65
   PE_2,  //D66
@@ -103,12 +103,7 @@ const PinName digitalPin[] = {
   PE_12, //D76
   PE_13, //D77
   PE_14, //D78
-  PE_15, //D79
-//Duplicated to have A0-A2 as F407 do not have Uno like connector
-// and to be aligned with PinMap_ADC
-  PC_0,//D80/A0 = D32
-  PC_1,//D81/A1 = D33
-  PC_2 //D82/A2 = D34
+  PE_15  //D79
 };
 
 #ifdef __cplusplus

variants/ARMED_V1/variant.h

@@ -65,9 +65,9 @@ extern const PinName digitalPin[];
 #define PB13  29 //D29
 #define PB14  30 //D30
 #define PB15  31 //D31
-#define PC0   32 //D32
-#define PC1   33 //D33
-#define PC2   34 //D34
+#define PC0   32 //D32/A0
+#define PC1   33 //D33/A1
+#define PC2   34 //D34/A2
 #define PC3   35 //D35
 #define PC4   36 //D36
 #define PC5   37 //D37
@@ -118,7 +118,7 @@ extern const PinName digitalPin[];
 #define NUM_DIGITAL_PINS        83
 // This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
 #define NUM_ANALOG_INPUTS       3
-#define NUM_ANALOG_FIRST        80
+#define NUM_ANALOG_FIRST        32
 
 // PWM resolution
 #define PWM_RESOLUTION          8
@@ -129,9 +129,6 @@ extern const PinName digitalPin[];
 #define LED_BUILTIN             PB7
 #define LED_HEARTBEAT           LED_BUILTIN
 
-// On-board user button
-// #define USER_BTN                2
-
 // SPI Definitions
 #define PIN_SPI_SS              PE7
 #define PIN_SPI_MOSI            PA7
@@ -178,8 +175,7 @@ extern const PinName digitalPin[];
 //
 // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
 //                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR     Serial // Require connections for ST-LINK VCP on U2 pin 12 and 13.
-                                   // See UM �6.1.3 ST-LINK/V2-A VCP configuration)
+#define SERIAL_PORT_MONITOR     Serial
 #define SERIAL_PORT_HARDWARE_OPEN  Serial
 #endif