Minimal USB temperature and humidity sensor with Digispark
- Digispark
- DHT11
- Jumper wires
Connect 5V/GND/P02 of Dispack to DHT 11.
| Digispark | DHT11 |
|---|---|
| 5V | VCC |
| GND | GND |
| P2 | DATA |
Open DigisparkTemper.ino in the Arduino IDE and program it in Digispark. The board must be "Digispark (Default - 16.5mhz)" and "TinyDHT" must be added to the library.
$ sudo pip install pyusb
$ sudo ./temper.py
{"Temperature": 22, "Humidity": 60}