大佬，能否编译微加云的？

[yu13740000]

大佬，找遍全网，微加云armbian除了f大的就没有了，f大的所有armbian升级dietpi时出错，提示没有可用的软件包linux-imge-current-arm-64，有的还会提示空间不够，不知道哪里的问题。n1用你的armbian升级dietpi正常。希望大佬给微加云也编译一个armbian吧！

[ophub]

vplus Armbian(beta) 下载地址（找文件名称里带 allwinner_vplus 字样的文件）：
https://github.com/ophub/amlogic-s9xxx-armbian/releases

我学习了下f大在他OpenWrt仓库里的打包方法，复制了他仓库里的u-boot等资源进行rebuild，但是我没这个设备，无法测试。

我在网上查看了一些关于vplus的刷机方法的介绍，这个设备原生系统不支持U盘启动，但是刷过f大的Armbian或者OpenWrt的盒子，已经自动替换了u-boot，支持USB启动Armbian和OpenWrt了。

1. 这个Armbian镜像文件里也添加了这个u-boot，所以如果你之前已经刷过他的armbian或者openwrt系统，就可以直接从USB启动这个镜像(略过1-5步，直接看6)。如果之前没刷过，目前盒子里还是原版系统，你先把这个Armbian刷入U盘，等原来的系统启动后，把写有这个Armbian的U盘插入usb接口，就会自动挂在到/mnt/sda2，输入命令查看下U盘的挂载路径：
   lsblk

2. 根据实际挂载路径修改下面的命令，进入u-boot目录

cd /mnt/sda2/usr/lib/u-boot
ls

3. 会看到 u-boot-sunxi-with-spl.bin 文件，手动写入u-boot到当前盒子，替换了u-boot，以后就支持U盘启动了：
   先删除分区和bootloader：
   dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=16

4. 再写入bootloader：
   dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8

5. 完成以后，支持usb启动的uboot已经刷入。输入命令重启：
   reboot

6. 使用安装命令把armbian写入emmc：
   armbian-install

7. 把下面命令截图给我看看

lsblk
df -hT
blkid

[yu13740000]

测试了一下，两个固件都不能u盘启动，我猜想你可能是拿的f大微加云的openwrt里面的u-boot，然后我把你U盘下的文件全删了，复制了f大armbian56+里面的文件，启动了。另外微加云原始原件不是安卓，是op。

login as: root
root@192.168.30.241's password:
__     __     _
\ \   / / __ | |_   _ ___
 \ \ / / '_ \| | | | / __|
  \ V /| |_) | | |_| \__ \
   \_/ | .__/|_|\__,_|___/
       |_|
Welcome to Armbian 23.02.0-trunk Jammy with Linux 5.10.26-flippy-56+

System load:   13%              Up time:       3 min
Memory usage:  11% of 980M      IP:            192.168.30.241
CPU temp:      37°C             Usage of /:    69% of 2.4G
storage/:      36% of 252M
RX today:      10.6 KiB

Last login: Sat Feb 25 09:45:32 2023 from 192.168.30.234
root@armbian:~# lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
sda            8:0    1 57.3G  0 disk
├─sda1         8:1    1  255M  0 part /boot
└─sda2         8:2    1  2.5G  0 part /var/log.hdd
                                      /
mmcblk0      179:0    0  7.3G  0 disk
├─mmcblk0p1  179:1    0  160M  0 part
├─mmcblk0p2  179:2    0  720M  0 part
├─mmcblk0p3  179:3    0  720M  0 part
└─mmcblk0p4  179:4    0  5.7G  0 part
mmcblk0boot0 179:32   0    4M  1 disk
mmcblk0boot1 179:64   0    4M  1 disk
root@armbian:~# df -hT
Filesystem     Type   Size  Used Avail Use% Mounted on
tmpfs          tmpfs   99M  5.6M   93M   6% /run
/dev/sda2      ext4   2.4G  1.7G  767M  69% /
tmpfs          tmpfs  491M     0  491M   0% /dev/shm
tmpfs          tmpfs  5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs  491M  4.0K  491M   1% /tmp
/dev/sda1      vfat   252M   91M  161M  36% /boot
armbian-ramlog tmpfs   50M  1.1M   49M   3% /var/log
tmpfs          tmpfs   99M     0   99M   0% /run/user/0
root@armbian:~# blkid
/dev/mmcblk0p1: SEC_TYPE="msdos" LABEL_FATBOOT="EMMC_BOOT" LABEL="EMMC_BOOT" UUID="E5FC-B93D" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="dd8ee066-01"
/dev/mmcblk0p2: LABEL="EMMC_ROOTFS1" UUID="c999cc06-5a0c-40d5-abb1-a40e8742b767" UUID_SUB="1d835446-cfb6-4c9a-8a10-d5f00a82ef69" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="dd8ee066-02"
/dev/mmcblk0p3: LABEL="EMMC_ROOTFS2" UUID="203ef8db-a5dc-4a5f-a5f7-48b47176a038" UUID_SUB="ce2ee3c2-d391-4c44-8373-d4400a424d74" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="dd8ee066-03"
/dev/mmcblk0p4: LABEL="EMMC_SHARED" UUID="c2a7e29c-2be5-4ec9-8a80-f0249f1e1c55" UUID_SUB="d5f191bb-4c26-46fa-90a7-c7ed09563f2f" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="dd8ee066-04"
/dev/sda2: LABEL="ROOTFS" UUID="3a9fa81b-6d47-4432-8049-89fcb12d609a" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="9e657864-02"
/dev/sda1: LABEL_FATBOOT="BOOT" LABEL="BOOT" UUID="AED9-D0A9" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="9e657864-01"
root@armbian:~#

[ophub]

你说的是不是你在电脑上双击打开/boot里面的文件，你都删了，换f大的armbian的/boot里面的文件？

我昨天也发现他的armbian和op不同，在他仓库里最新的打包op的配置里面少了一些文件，我问他原因还没回信息。我一会改一下用56版armbian的/boot文件，你再试一试。

这个设备，你以前是怎么写入emmc呢？使用的root下的脚本？还是从U盘中dd写入？

[yu13740000]

U盘写完，点脑打开U盘，看到的文件，全删了，然后把f大U盘看到的全复制过来，能启动，但是启动的时候会出现两个ip会来回跳动一下。
一 微加云接在路由下，准备一个能正常启动的armbian u盘，启动进入armbian,在主路由下找到微加云网址，
用MobaXterm_CHS把镜像上传到armbian的/opt目录
二 清空emmc

1. dd if=/dev/zero of=/dev/mmcblk0 bs=1M skip=16 && sync
2. dd if=/dev/zero of=/dev/mmcblk0 bs=512 count=1 && sync
   三 刷入
   cd /opt
   dd if=openwrt_h6_vplus_R23.01.01_k6.1.2-flippy-80+.img of=/dev/mmcblk0 bs=1M
   sync
   halt
   关机后拔掉u盘，重新开机即可启动op系统
   ===========================================================================================
   微加云接在路由下
   一 准备一个能正常启动的armbian u盘，启动进入armbian,把镜像上传到armbian的/opt目录
   二 清空emmc
   mkfs.ext4 /dev/mmcblk0
   全格，不能断电
   三 刷入
   cd /opt
   dd if=openwrt_h6_vplus_R22.4.1_k5.4.188-flippy-71+o.img of=/dev/mmcblk0 bs=1M
   sync
   halt
   关机后拔掉u盘，重新开机即可启动op系统

==========================================================================================正常我们写入op用第二种清空，armbian还么写过，f大的新的可能有脚本，但是我们都一直格式化后dd进去。这么做的原因是最起初有个c大最先完成的op固件的uboot和现在的f大的uboot可能不一样，不格式化，刷第二人的会有点小问题，大部分是刷f大的启动困难，从F大的刷成c大的就没问题，c大的u-boot更强，但是c大退隐江湖，好几年不更新，他说电脑里的东西没了。

[yu13740000]

另外请编译Debian的，我需要debian，好多平台只认Debian。

login as: root
root@192.168.30.118's password:
__     __     _
\ \   / / __ | |_   _ ___
 \ \ / / '_ \| | | | / __|
  \ V /| |_) | | |_| \__ \
   \_/ | .__/|_|\__,_|___/
       |_|
Welcome to Armbian 23.02.0-trunk Jammy with Linux 5.10.26-flippy-56+

System load:   25%              Up time:       3 min
Memory usage:  11% of 980M      IP:            192.168.30.118
CPU temp:      36°C             Usage of /:    70% of 2.4G
storage/:      36% of 252M
RX today:

[ General system configuration (beta): armbian-config ]

Last login: Sat Feb 25 10:17:23 2023 from 192.168.30.234
armbian:~:# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.1 LTS
Release:        22.04
Codename:       jammy
armbian:~:#

[ophub]

一会我换一下/boot里面的文件重新生成一下。我刚才又学习了一下f大的op打包脚本和更新固件的脚本，他现在做的可能只针对你上面的方法使用，从armbian里面dd写入op至emmc，不再支持从U盘启动op了，我一会添加上原来56版支持U盘启动的cmd

[yu13740000]

链接: https://pan.baidu.com/s/1Scz6Y85ToFSGBDB2pOYYfw?pwd=kuz9 提取码: kuz9

这个是c大的经典固件，就是很老，但是boot很好，你看看有没有用。

[ophub]

https://github.com/unifreq/openwrt_packit/tree/master/files/vplus

f大持续更新过3个u-boot，咱们先测试最新版u-boot

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian/releases/tag/Armbian_bullseye_02.24.2231

先测试刷入U盘，能不能从U盘启动
启动后先测试下更新内核的脚本是否工作正常： armbian-update -k 6.1.12
再测试写入emmc功能(用安装脚本，不是dd)： armbian-install

更新内核和写入emmc的这2步操作，发下你的执行日志。

amlogic-s9xxx-armbian/build-armbian/armbian-files/platform-files/allwinner/rootfs/usr/sbin/armbian-install

Lines 231 to 232 in c2d5959

	mv -f ${DIR_INSTALL}/boot-emmc.scr ${DIR_INSTALL}/boot.scr
	mv -f ${DIR_INSTALL}/boot-emmc.cmd ${DIR_INSTALL}/boot.cmd

我看网上一些帖子都是几年前的，说这个设备没有救砖系统和救砖工具？现在是什么情况了？

[yu13740000]

新固件可以启动了，刷的6.1.13，我先U盘上折腾看看U盘上升级dietpi，暂时不写emmc。
微加云有一套救砖方案，有私密QQ群，当时第一批人买了后组建了群，由C大F大领头历经很久，出了破解方案，固件和方案没有网上公开，抵制奸商涨价，群里的都会救砖，只是微加云救砖比较麻烦，需要焊接OTG和adb线。

[ophub]

U盘默认空间只有2.5G，先用armbian-tf命令，把U盘中的剩余可用空间启用了。不然的话在U盘中安装更多软件会因为空间不足而导致失败。

测试更新内核和写入emmc操作时贴一下日志，我确认一下操作执行情况。

[yu13740000]

root@armbian:~# nano /home/dietpi-installer.sh
root@armbian:~# chmod +x /home/dietpi-installer.sh
root@armbian:~# cd /home
root@armbian:/home# ./dietpi-installer.sh
mount: /tmp: mount point not mounted or bad option.
removed '/etc/apt/apt.conf.d/71-armbian-no-recommends'
removed '/etc/apt/apt.conf.d/02-armbian-compress-indexes'
removed '/etc/apt/apt.conf.d/02-armbian-periodic'
removed '/etc/apt/apt.conf.d/02-armbian-postupdate'
removed '/etc/apt/apt.conf.d/81-armbian-no-languages'
Get:1 http://deb.debian.org/debian bullseye InRelease [116 kB]
Get:2 http://security.debian.org bullseye-security InRelease [48.4 kB]
Get:3 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB]
Get:4 http://deb.debian.org/debian bullseye-backports InRelease [49.0 kB]
Get:5 http://security.debian.org bullseye-security/main arm64 Packages [224 kB]
Get:6 http://security.debian.org bullseye-security/main armhf Packages [224 kB]
Get:7 http://deb.debian.org/debian bullseye/main armhf Packages [7945 kB]
Get:8 http://deb.debian.org/debian bullseye/main arm64 Packages [8072 kB]
Get:9 http://deb.debian.org/debian bullseye/main armhf Contents (deb) [9306 kB]
Get:10 http://deb.debian.org/debian bullseye/main all Contents (deb) [31.1 MB]
Get:11 http://deb.debian.org/debian bullseye/main arm64 Contents (deb) [9832 kB]
Get:12 http://deb.debian.org/debian bullseye/contrib arm64 Packages [41.0 kB]
Get:13 http://deb.debian.org/debian bullseye/contrib armhf Packages [40.2 kB]
Get:14 http://deb.debian.org/debian bullseye/contrib armhf Contents (deb) [29.2 kB]
Get:15 http://deb.debian.org/debian bullseye/contrib arm64 Contents (deb) [29.6 kB]
Get:16 http://deb.debian.org/debian bullseye/contrib all Contents (deb) [57.3 kB]
Get:17 http://deb.debian.org/debian bullseye/non-free armhf Packages [56.3 kB]
Get:18 http://deb.debian.org/debian bullseye/non-free arm64 Packages [73.0 kB]
Get:19 http://deb.debian.org/debian bullseye/non-free armhf Contents (deb) [13.5 kB]
Get:20 http://deb.debian.org/debian bullseye/non-free arm64 Contents (deb) [37.4 kB]
Get:21 http://deb.debian.org/debian bullseye/non-free all Contents (deb) [888 kB]
Get:22 http://deb.debian.org/debian bullseye-updates/main armhf Packages [12.0 kB]
Get:23 http://deb.debian.org/debian bullseye-updates/main arm64 Packages [12.0 kB]
Get:24 http://deb.debian.org/debian bullseye-updates/main all Contents (deb) [25.0 kB]
Get:25 http://deb.debian.org/debian bullseye-updates/main arm64 Contents (deb) [42.8 kB]
Get:26 http://deb.debian.org/debian bullseye-updates/main armhf Contents (deb) [45.0 kB]
Get:27 http://deb.debian.org/debian bullseye-backports/main armhf Packages [393 kB]
Get:28 http://deb.debian.org/debian bullseye-backports/main arm64 Packages [397 kB]
Get:29 http://deb.debian.org/debian bullseye-backports/main all Contents (deb) [5137 kB]
Get:30 http://deb.debian.org/debian bullseye-backports/main arm64 Contents (deb) [1630 kB]
Get:31 http://deb.debian.org/debian bullseye-backports/main armhf Contents (deb) [1832 kB]
Get:32 http://deb.debian.org/debian bullseye-backports/contrib armhf Packages [4388 B]
Get:33 http://deb.debian.org/debian bullseye-backports/contrib arm64 Packages [4896 B]
Get:34 http://deb.debian.org/debian bullseye-backports/contrib arm64 Contents (deb) [16.4 kB]
Get:35 http://deb.debian.org/debian bullseye-backports/contrib all Contents (deb) [20.1 kB]
Get:36 http://deb.debian.org/debian bullseye-backports/contrib armhf Contents (deb) [16.3 kB]
Get:37 http://deb.debian.org/debian bullseye-backports/non-free armhf Packages [9060 B]
Get:38 http://deb.debian.org/debian bullseye-backports/non-free arm64 Packages [9868 B]
Get:39 http://deb.debian.org/debian bullseye-backports/non-free arm64 Contents (deb) [5710 B]
Get:40 http://deb.debian.org/debian bullseye-backports/non-free armhf Contents (deb) [3663 B]
Get:41 http://deb.debian.org/debian bullseye-backports/non-free all Contents (deb) [57.9 kB]
Fetched 77.9 MB in 20s (3885 kB/s)
Reading package lists... Done
[ INFO ] Selected Git branch: MichaIng/master
[ INFO ] DietPi-PREP | Detected distribution version: Bullseye (ID: 6)
[ INFO ] DietPi-PREP | Detected target CPU architecture: aarch64 (ID: 3)

 DietPi-PREP
─────────────────────────────────────────────────────
 Step: [0] Detecting existing DietPi system

[ INFO ] DietPi-PREP | No DietPi system found, skipping old instance uninstall...

 DietPi-PREP
─────────────────────────────────────────────────────
 Step: [1] Target system inputs

[ INFO ] DietPi-PREP | Entered image creator: yu13740000
[ INFO ] DietPi-PREP | Entered pre-image info: Debian
[ INFO ] DietPi-PREP | Selected hardware model ID: 27
[ INFO ] DietPi-PREP | Marking WiFi as NOT required
[ INFO ] DietPi-PREP | Selected Debian version: bullseye (ID: 6)

 DietPi-PREP
─────────────────────────────────────────────────────
 Step: [2] Downloading and installing DietPi source code

[  OK  ] DietPi-PREP | Downloading source code
[  OK  ] DietPi-PREP | Unpacking source code
[  OK  ] DietPi-PREP | Removing unused files
[  OK  ] DietPi-PREP | Hardening source code mode
[ INFO ] DietPi-PREP | Moving kernel and boot configuration to /boot
[  OK  ] DietPi-PREP | mv DietPi-master/dietpi.txt /boot/
[  OK  ] DietPi-PREP | mv DietPi-master/README.md /boot/dietpi-README.md
[  OK  ] DietPi-PREP | mv DietPi-master/LICENSE /boot/dietpi-LICENSE.txt
[  OK  ] DietPi-PREP | Copy DietPi scripts to /boot/dietpi
[  OK  ] DietPi-PREP | Copy DietPi system files in place
[  OK  ] DietPi-PREP | Clean download location
[ INFO ] DietPi-PREP | Storing DietPi version info:
[  OK  ] DietPi-PREP | Desired setting in /boot/dietpi.txt was already set: DEV_GITBRANCH=master
[  OK  ] DietPi-PREP | Desired setting in /boot/dietpi.txt was already set: DEV_GITOWNER=MichaIng
[ INFO ] DietPi-PREP | Applying DietPi live patches to fix known bugs in this version
[  OK  ] DietPi-PREP | Added setting G_LIVE_PATCH_STATUS[0]='not applicable' to end of file /boot/dietpi/.version
[ INFO ] DietPi-PREP | Applying live patch 1
[  OK  ] DietPi-PREP | Added setting G_LIVE_PATCH_STATUS[1]='applied' to end of file /boot/dietpi/.version
[ INFO ] DietPi-PREP | Applying live patch 2
[  OK  ] DietPi-PREP | Added setting G_LIVE_PATCH_STATUS[2]='applied' to end of file /boot/dietpi/.version
[  OK  ] DietPi-PREP | cp /boot/dietpi/.version /var/lib/dietpi/.dietpi_image_version
[  OK  ] DietPi-PREP | systemctl daemon-reload

 DietPi-PREP
─────────────────────────────────────────────────────
 Step: [3] APT configuration

[ INFO ] DietPi-PREP | Setting APT sources.list: bullseye 6
[  OK  ] DietPi-PREP | /boot/dietpi/func/dietpi-set_software apt-mirror default
[  OK  ] DietPi-PREP | mkdir -p /run/dietpi /var/tmp/dietpi/logs
[ INFO ] DietPi-PREP | APT update, please wait...
Hit:1 https://deb.debian.org/debian bullseye InRelease
Hit:2 https://deb.debian.org/debian bullseye-updates InRelease
Get:3 https://deb.debian.org/debian-security bullseye-security InRelease [48.4 kB]
Hit:4 https://deb.debian.org/debian bullseye-backports InRelease
Get:5 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages [224 kB]
Get:6 https://deb.debian.org/debian-security bullseye-security/main armhf Packages [224 kB]
Fetched 497 kB in 2s (217 kB/s)
Reading package lists...
[  OK  ] DietPi-PREP | APT update
[ INFO ] DietPi-PREP | Marking all packages as auto-installed first, to allow effective autoremove afterwards
[  OK  ] DietPi-PREP | apt-mark auto adduser alsa-utils apt apt-file apt-utils aptitude aptitude-common armbian-bsp-cli-odroidn2 armbian-config armbian-firmware armbian-plymouth-theme armbian-zsh autoconf automake autotools-dev avahi-autoipd base-files base-passwd bash bash-completion bc bind9-dnsutils bind9-host bind9-libs binutils binutils-aarch64-linux-gnu binutils-common bison bridge-utils bsdextrautils bsdutils btrfs-progs build-essential bzip2 ca-certificates chrony command-not-found console-setup console-setup-linux coreutils cpio cpp cpp-10 cpufrequtils cracklib-runtime crda cron curl dash dbus dbus-user-session dctrl-tools debconf debconf-utils debian-archive-keyring debianutils device-tree-compiler dialog diffutils dirmngr distro-info-data dkms dmsetup dnsutils dosfstools dpkg dpkg-dev e2fsprogs ethtool evtest expect f2fs-tools f3 fake-hwclock fbset fdisk figlet file findutils flex fontconfig fontconfig-config fonts-cantarell fonts-dejavu-core fping fuse g++ g++-10 gcc gcc-10 gcc-10-base gcc-9-base gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 git git-man gnupg gnupg-l10n gnupg-utils gnupg2 gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv gpiod grep groff-base gzip haveged hdparm hostapd hostname hping3 html2text htop i2c-tools ifenslave ifupdown init init-system-helpers initramfs-tools initramfs-tools-core iotop iozone3 iperf3 iproute2 iptables iputils-arping iputils-ping isc-dhcp-client iso-codes iw jq kbd keyboard-configuration keyutils klibc-utils kmod less libacl1 libapparmor1 libapt-pkg-perl libapt-pkg6.0 libargon2-1 libasan6 libasound2 libasound2-data libassuan0 libatomic1 libatopology2 libattr1 libaudit-common libaudit1 libbinutils libblkid1 libbluetooth3 libboost-iostreams1.74.0 libbpf0 libbrotli1 libbsd0 libbz2-1.0 libc-bin libc-dev-bin libc-l10n libc6 libc6-dev libcaca0 libcairo2 libcap-ng0 libcap2 libcap2-bin libcbor0 libcc1-0 libcom-err2 libcpufreq0 libcrack2 libcrypt-dev libcrypt1 libcryptsetup12 libctf-nobfd0 libctf0 libcurl3-gnutls libcurl4 libcwidget4 libdaemon0 libdatrie1 libdb5.3 libdbus-1-3 libdebconfclient0 libdevmapper1.02.1 libdigest-sha-perl libdns-export1110 libdpkg-perl libdrm-common libdrm2 libedit2 libelf1 liberror-perl libestr0 libevent-2.1-7 libexpat1 libexporter-tiny-perl libext2fs2 libfastjson4 libfdisk1 libfdt1 libffi7 libfftw3-single3 libfido2-1 libfile-fnmatch-perl libfontconfig1 libfreetype6 libfribidi0 libfstrm0 libfuse2 libgcc-10-dev libgcc-s1 libgcrypt20 libgdbm-compat4 libgdbm6 libgirepository-1.0-1 libglib2.0-0 libgmp10 libgnutls30 libgomp1 libgpg-error0 libgpiod2 libgpm2 libgraphite2-3 libgssapi-krb5-2 libharfbuzz0b libhavege2 libhogweed6 libi2c0 libicu67 libidn2-0 libiniparser1 libip4tc2 libip6tc2 libiperf0 libisc-export1105 libisl23 libitm1 libiw30 libjansson4 libjq1 libjson-c5 libk5crypto3 libkeyutils1 libklibc libkmod2 libkrb5-3 libkrb5support0 libksba8 libldap-2.4-2 liblist-moreutils-perl liblist-moreutils-xs-perl liblmdb0 liblocale-gettext-perl liblognorm5 liblsan0 liblz4-1 liblzma5 liblzo2-2 libmagic-mgc libmagic1 libmaxminddb0 libmd0 libmm-glib0 libmnl0 libmount1 libmpc3 libmpdec3 libmpfr6 libncurses6 libncursesw6 libndp0 libnetfilter-conntrack3 libnetplan0 libnettle8 libnewt0.52 libnfnetlink0 libnfsidmap2 libnftnl11 libnghttp2-14 libnl-3-200 libnl-3-dev libnl-genl-3-200 libnl-genl-3-dev libnl-route-3-200 libnm0 libnpth0 libnsl-dev libnsl2 libnss-myhostname libntfs-3g883 libonig5 libp11-kit0 libpackagekit-glib2-18 libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libparted2 libpcap0.8 libpci3 libpcre2-8-0 libpcre3 libpcsclite1 libperl5.32 libpipeline1 libpixman-1-0 libpkcs11-helper1 libplymouth5 libpng16-16 libpolkit-agent-1-0 libpolkit-gobject-1-0 libpopt0 libproc-processtable-perl libprocps8 libprotobuf-c1 libpsl5 libpython3-stdlib libpython3.9-minimal libpython3.9-stdlib libqrencode4 libreadline8 libregexp-assemble-perl librtmp1 libsamplerate0 libsasl2-2 libsasl2-modules-db libsctp1 libseccomp2 libselinux1 libsemanage-common libsemanage1 libsensors-config libsensors5 libsepol1 libsigc++-2.0-0v5 libsigsegv2 libslang2 libsmartcols1 libsqlite3-0 libss2 libssh2-1 libssl-dev libssl1.1 libstdc++-10-dev libstdc++6 libsysfs2 libsystemd0 libtasn1-6 libtcl8.6 libteamdctl0 libthai-data libthai0 libtinfo6 libtirpc-common libtirpc-dev libtirpc3 libtsan0 libubsan1 libuchardet0 libudev1 libunistring2 libusb-1.0-0 libutempter0 libuuid1 libuv1 libwrap0 libwrap0-dev libx11-6 libx11-data libxapian30 libxau6 libxcb-render0 libxcb-shm0 libxcb1 libxdmcp6 libxext6 libxml2 libxrender1 libxtables12 libxxhash0 libyaml-0-2 libzstd1 linux-base linux-libc-dev locales login logrotate logsave lsb-base lsb-release lsof m4 make man-db mawk mc mc-data media-types mmc-utils mount mtd-utils nano ncurses-base ncurses-bin ncurses-term net-tools netbase netcat-openbsd netplan.io network-manager network-manager-openvpn networkd-dispatcher nfs-common nocache ntfs-3g openssh-client openssh-server openssh-sftp-server openssl openvpn parted passwd patch pci.ids pciutils perl perl-base perl-modules-5.32 pinentry-curses plymouth plymouth-label plymouth-themes policykit-1 procps psmisc pv python-apt-common python3 python3-apt python3-dbus python3-distro-info python3-distutils python3-gi python3-lib2to3 python3-minimal python3-netifaces python3-pycurl python3-software-properties python3-yaml python3.9 python3.9-minimal qrencode readline-common resolvconf rfkill rpcbind rsync rsyslog runit-helper screen sed sensible-utils smartmontools software-properties-common stress sudo sunxi-tools sysfsutils sysstat systemd systemd-sysv sysvinit-utils tar tcl-expect tcl8.6 tmux toilet toilet-fonts tzdata u-boot-tools ucf udev unattended-upgrades unicode-data unzip usbutils util-linux vim vim-common vim-runtime vlan vnstat wget whiptail wireguard-tools wireless-regdb wireless-tools wpasupplicant xkb-data xxd xz-utils zip zlib1g zsh zsh-common
[  OK  ] DietPi-PREP | mkdir -p /etc/kernel/postinst.d /etc/kernel/postrm.d /etc/initramfs/post-update.d
[  OK  ] DietPi-PREP | chmod +x /etc/initramfs/post-update.d/99-dietpi-uboot
[  OK  ] DietPi-PREP | chmod +x /etc/kernel/postinst.d/dietpi-initramfs_cleanup
[  OK  ] DietPi-PREP | ln -sf /etc/kernel/postinst.d/dietpi-initramfs_cleanup /etc/kernel/postrm.d/dietpi-initramfs_cleanup
[  OK  ] DietPi-PREP | rmdir --ignore-fail-on-non-empty /etc/kernel/preinst.d
[  OK  ] DietPi-PREP | eval curl -sSfL 'https://apt.armbian.com/armbian.key' | gpg --dearmor -o /etc/apt/trusted.gpg.d/dietpi-armbian.gpg --yes
[  OK  ] DietPi-PREP | rm /etc/apt/trusted.gpg
[FAILED] DietPi-PREP | rm /etc/apt/sources.list.d/*
[FAILED] DietPi-PREP | rm /etc/apt/sources.list.d/*
[FAILED] DietPi-PREP | rm /etc/apt/sources.list.d/*

---------------------------------------------------------------------
- DietPi has encountered an error                                   -
- Please create a ticket: https://github.com/MichaIng/DietPi/issues -
- Copy and paste only the BLUE lines below into the ticket          -
---------------------------------------------------------------------
#### Details:
- Date           | Sat Feb 25 12:52:57 CST 2023
- DietPi version | v8.14.2 (MichaIng/master)
- Image creator  |
- Pre-image      |
- Hardware       |  (ID=27)
- Kernel version | `Linux armbian 5.15.95-flippy-82+o #212 SMP PREEMPT Thu Feb 23 21:20:57 CST 2023 aarch64 GNU/Linux`
- Distro         | bullseye (ID=6,RASPBIAN=0)
- Command        | `rm /etc/apt/sources.list.d/*`
- Exit code      | 1
- Software title | DietPi-PREP
#### Steps to reproduce:
<!-- Explain how to reproduce the issue -->
1. ...
2. ...
#### Expected behaviour:
<!-- What SHOULD happen? -->
- ...
#### Actual behaviour:
<!-- What IS happening? -->
- ...
#### Extra details:
<!-- Please post any extra details that might help solve the issue -->
- ...
#### Additional logs:

rm: cannot remove '/etc/apt/sources.list.d/*': No such file or directory

---------------------------------------------------------------------
[FAILED] DietPi-PREP | Unable to continue, DietPi-PREP will now terminate.

root@armbian:/home#

[yu13740000]

rm: cannot remove '/etc/apt/sources.list.d/*': No such file or directory
两个版本的armbian都会提示这个错误

[ophub]

这个目录下默认没文件。这是一些软件源自己安装源时存放的路径。