-
Notifications
You must be signed in to change notification settings - Fork 2.9k
S905L3的M301A写入eMMC使用方法 #3055
Copy link
Copy link
Open
Labels
documentationImprovements or additions to documentationImprovements or additions to documentationnew boxResearch Fills in the BlanksResearch Fills in the BlankssupportThis need is supportedThis need is supported
Metadata
Metadata
Assignees
Labels
documentationImprovements or additions to documentationImprovements or additions to documentationnew boxResearch Fills in the BlanksResearch Fills in the BlankssupportThis need is supportedThis need is supported
Device Information | 设备信息
Armbian Version | 系统版本
Describe the bug | 问题描述
在使用balenaEtcher将镜像刷入usb并成功启动后出现无法连接有线网络/无法写入eMMC故障。
由于支持列表中没用S905L3版本的M301A,所以尝试直接使用“Armbian_25.08.0_amlogic_s905l3_bullseye_5.15.186_server_2025.07.01.img“作为镜像写入u盘并通过reboot update重启进入系统。
在测试过程中使用了多个底包,安卓4.4版本的底包均无法驱动有线网卡及eMMC,安卓9版本的底包仅UNT402A为底的S905L3通刷包能够驱动有线网卡,但运行armbian-install指令时仍提示“[ ERROR ] Internal eMMC storage was't found in this device!”。
使用TTL抓取了设备在4.4系统以及9系统下从USB启动的全部日志,已经附于附件,烦请查阅。
目前能够观察到在uboot引导阶段时,机器在读取s905_autoscript等内容时会报错"Bad device mmc 0",具体原因不明。
目前使用"meson-gxl-s905l2-x7-5g.dtb"启动usb镜像,除上述问题外运行正常。
不太确定是不是机器的问题无法写入emmc,还请查阅一下。
android-4.4.2-startlog-m301a-ys-s905l3.txt
android-9-startlog-m301a-basewith-UNT402A-ys-s905l3.log
m301a-ys-android-usb-burning-log-20250729T014027.txt