add support lubancat-1(rk3566) and lubancat-2(rk3568)

build-armbian/armbian-files/different-files/lubancat-1/bootfs/armbianEnv.txt

@@ -0,0 +1,17 @@
+verbosity=7
+bootlogo=false
+fdtfile=rockchip/rk3566-lubancat-1.dtb
+rootdev=/dev/mmcblk0p2
+rootfstype=ext4
+rootflags=rw,errors=remount-ro
+console=serial
+consoleargs=console=ttyS2,1500000
+usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
+docker_optimizations=on
+earlycon=on
+earlyconargs=earlycon=uart8250,mmio32,0xfe660000
+extraargs=rw rootwait
+extraboardargs=net.ifnames=0
+overlay_prefix=rk3568
+overlays=
+user_overlays=

build-armbian/armbian-files/different-files/lubancat-1/bootfs/boot.cmd

@@ -0,0 +1,74 @@
+# DO NOT EDIT THIS FILE
+#
+# Please edit /boot/armbianEnv.txt to set supported parameters
+#
+
+setenv load_addr "0x39000000"
+setenv overlay_error "false"
+# default values
+setenv rootdev "/dev/mmcblk0p1"
+setenv verbosity "1"
+setenv console "both"
+setenv bootlogo "false"
+setenv rootfstype "ext4"
+setenv rootflags "rw,errors=remount-ro"
+setenv docker_optimizations "on"
+setenv earlycon "on"
+
+echo "Boot script loaded from ${devtype} ${devnum}"
+
+if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
+	load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
+	env import -t ${load_addr} ${filesize}
+fi
+
+if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
+
+if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
+if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=tty1"; fi
+if test "${earlycon}" = "on"; then setenv consoleargs "${earlyconargs} ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+
+# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
+if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi
+
+setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} rootflags=${rootflags} ${consoleargs} consoleblank=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
+
+if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
+
+load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
+load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
+
+load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+fdt addr ${fdt_addr_r}
+fdt resize 65536
+for overlay_file in ${overlays}; do
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
+		echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+for overlay_file in ${user_overlays}; do
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
+		echo "Applying user provided DT overlay ${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+if test "${overlay_error}" = "true"; then
+	echo "Error applying DT overlays, restoring original DT"
+	load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+else
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-fixup.scr; then
+		echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
+		source ${load_addr}
+	fi
+	if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
+		load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
+		echo "Applying user provided fixup script (fixup.scr)"
+		source ${load_addr}
+	fi
+fi
+booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+
+# Recompile with:
+# mkimage -C none -A arm -T script -n 'flatmax load script' -d /boot/boot.cmd /boot/boot.scr

build-armbian/armbian-files/different-files/lubancat-2/bootfs/armbianEnv.txt

@@ -0,0 +1,17 @@
+verbosity=7
+bootlogo=false
+fdtfile=rockchip/rk3568-lubancat-2.dtb
+rootdev=/dev/mmcblk0p2
+rootfstype=ext4
+rootflags=rw,errors=remount-ro
+console=serial
+consoleargs=console=ttyS2,1500000
+usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
+docker_optimizations=on
+earlycon=on
+earlyconargs=earlycon=uart8250,mmio32,0xfe660000
+extraargs=rw rootwait
+extraboardargs=net.ifnames=0
+overlay_prefix=rk3568
+overlays=
+user_overlays=

build-armbian/armbian-files/different-files/lubancat-2/bootfs/boot.cmd

@@ -0,0 +1,74 @@
+# DO NOT EDIT THIS FILE
+#
+# Please edit /boot/armbianEnv.txt to set supported parameters
+#
+
+setenv load_addr "0x39000000"
+setenv overlay_error "false"
+# default values
+setenv rootdev "/dev/mmcblk0p1"
+setenv verbosity "1"
+setenv console "both"
+setenv bootlogo "false"
+setenv rootfstype "ext4"
+setenv rootflags "rw,errors=remount-ro"
+setenv docker_optimizations "on"
+setenv earlycon "on"
+
+echo "Boot script loaded from ${devtype} ${devnum}"
+
+if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
+	load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
+	env import -t ${load_addr} ${filesize}
+fi
+
+if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
+
+if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
+if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=tty1"; fi
+if test "${earlycon}" = "on"; then setenv consoleargs "${earlyconargs} ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+
+# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
+if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi
+
+setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} rootflags=${rootflags} ${consoleargs} consoleblank=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
+
+if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi
+
+load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
+load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
+
+load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+fdt addr ${fdt_addr_r}
+fdt resize 65536
+for overlay_file in ${overlays}; do
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
+		echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+for overlay_file in ${user_overlays}; do
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
+		echo "Applying user provided DT overlay ${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+if test "${overlay_error}" = "true"; then
+	echo "Error applying DT overlays, restoring original DT"
+	load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+else
+	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/${overlay_prefix}-fixup.scr; then
+		echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
+		source ${load_addr}
+	fi
+	if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
+		load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
+		echo "Applying user provided fixup script (fixup.scr)"
+		source ${load_addr}
+	fi
+fi
+booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+
+# Recompile with:
+# mkimage -C none -A arm -T script -n 'flatmax load script' -d /boot/boot.cmd /boot/boot.scr

build-armbian/armbian-files/different-files/lubancat-2/rootfs/etc/balance_irq

@@ -0,0 +1,39 @@
+# /etc/balance_irq
+# 用于中断设备的负载均衡
+# 用法：
+# 首先， 用 cat /proc/interrupts 进行观察
+#        如果某个cpu负载过重，可以把对应的中断设备迁移到其它cpu
+#  /proc/interrupt格式：
+#        最左列：中断号
+#        第 2 至第 2+cpus 列：cpu单核上产生的中断数量
+#        最右列：对应的设备名
+#
+# 本配置文件格式：
+#        第1列： 设备名
+#        第2列： 期望绑定在第几个cpu (从1开始)
+#
+#  配置文件改好，运行 balethirq.pl 即时生效
+
+# wan
+eth0		4
+
+# lan
+eth1		1
+
+# pcie lan rx
+eth2-0		3
+# pcie lan tx-0
+eth2-16		2
+# pcie lan tx-1
+eth2-18		2
+
+# pcie lan rx
+eth3-0		2
+# pcie lan tx-0
+eth3-16		1
+# pcie lan tx-1
+eth3-18		1
+
+# usb 3.0
+xhci-hcd:usb1	2
+xhci-hcd:usb3	4