More than 255 led strip ?

[asgardc3r]

hello,

i'm trying to make prismatik work with a 262 SK9822 led strip.
it is working perfectly until 255 led, but no more

i've tried to change the number of led in main.conf but keeps crashing prismatik after.

do anyone have a solution ?

Thanks

[sofos1990]

That would be so useful! I'm looking for exactly the same.
In fact if you go to custom layout you can have up to 99 LEDs per side but even that is not enough with the 144 LEDs/m strip these days. I would appreciate if somebody could fix this.

[psieg]

I don't remember whether or not there was a good reason for that. Feel free to change the number here and try

[asgardc3r]

hi,
i've tried to get this compile but no success so far.
could anyone help me get this done ?

[sofos1990]

Same here. I can't compile it.

[asgardc3r]

@psieg i've got it to work ( althought some warning in visual studio).
works perfect with 262 SK9822 leds.

do you think it will be possible to increase the max number of led to the original code and unlock the max number of led per side ?

thanks a lot for the work

[psieg]

If it works I can consider it for the next release, sure.

In the meantime, you should be able to try it by adding

<property name="maximum">
          <number>999</number>
</property>

here for sbBottomLeds, sbSideLeds and sbTopLeds.

Let me know how it works out

[asgardc3r]

hi,
It works perfectly. How can i merge the changes with the main sources ? I have put the number of led to 511 without any probleme.

2 more things :
1/ i have modified the baudrate to 1500000 then 2000000 and every thing is working great. i think the code should have those baud rates.
2/ i have several warning and error. but the code works. i put the log out.

thanks

[asgardc3r]

@psieg , how do i merge the code ?

[psieg]

If it's only the three changes I described, it's probably easiest if I just do the changes for the next release.
If you want to, you can create a pull request.

Given your fork has no new commit, I assume you downloaded a zip archive (and are unfamiliar with git)?
In that case, just open the file in your fork (https://github.com/asgardc3r/Lightpack/blob/master/Software/src/wizard/ZonePlacementPage.ui) click the pen in the upper right corner and do the changes there.
Then click new pull request

[dtydings]

Hey hey! This was the only thread on the entire internets that mentioned increasing the max led count in prismatik. Were you all able to get this working? If so, would anyone be so kind as to help me understand how to install the modified version of prismatik on macOS? If you're still reading this thread 3 years later, thank you in advance!

[zomfg]

Adalight has doubled up to 511 since then. If you need more, that would need a new build. Unless you use ESP8266/ESP32 board in which case you can go up to 1500 over UDP.
There is nothing special about macOS version, you download and install like any other app.

[mannebanco]

I have the same issue. Using the unofficial version of Prismatik 5.11.2.23. It even says 511 Leds in the setup guide. But I can't get it pass 255 leds. I know I have enough power using an injector at the end. Using WS2812B 144 leds/m and an Arduino Uno. They light up correct when I upload the scratch. I would want 310 Leds for the strip to be at the edge of the screen.

Is there possibly any limitations on the actual strips? Or is it a bug related to Prismatik?

Does anyone have an idea where this limit could come from?

[dtydings]

@zomfg Thank you!! Yes I'm using an ESP8266 with WLED. I was previously using the official prismatik download from the lightpack website with someone's WLED plugin. That worked well but the 255 pixel limitation was still there. What I liked about that plugin though was that I could duplicate the plugin for multiple devices/IP addresses and run them separately from the terminal.

With this unofficial fork, I'm using the DNRGB UDP setting with 647 leds and it looks great. However, is there a way to forward this to multiple ESP8266's/IP addresses? My other 3 strips/controllers have 150 pixels each but I don't mind setting it to 647 and using that for all the strips. I've already confirmed setting the pixel count higher than the actual numbers of pixels in the strip is fine and doesn't cause any problems. I'm not really going for placement accuracy, more for average color and I just want all pixels to be active. Would it be possible to run multiple profiles at the same time without running multiple grabbers? Having 4 grabbers active would bring my mac to a crawl.

In the main.conf file, I tried adding IP addresses like below, but that didn't work.

[Dnrgb]
Address="192.168.1.51","192.168.1.38"
NumberOfLeds=647
Port=21324
Timeout=255

I also tried duplicating that entire section like below but prismatik also didn't like that. On startup, it deleted the first group.

[Dnrgb]
Address=192.168.1.51
NumberOfLeds=647
Port=21324
Timeout=255

[Dnrgb]
Address=192.168.1.38
NumberOfLeds=647
Port=21324
Timeout=255

Any help would be greatly appreciated!!

@mannebanco When you do the configuration wizard in prismatik with this unofficial version, use DNRGB UDP. That one has a max of 1500 leds.

[mannebanco]

I Will try that. Thank you very much!

EDIT: Did not work. The scratch was limited. Used another one and got it working.

Appreciate the help!

Have a good evening.