pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

cclauss · 2023-02-28T10:09:23Z

Ruff supports over ~~400~~ 500 lint rules including flake8, isort, pylint, and pyupgrade and is written in Rust for speed.
Also added rules for pylint conventions and pylint errors.

.pre-commit-config.yaml

Pierre-Sassoulas · 2023-02-28T10:19:05Z

Who can take the decision to drop python 3.6 ? It's been EOL for a long time at this point.

RonnyPfannschmidt · 2023-02-28T10:32:20Z

Yes we can

cclauss · 2023-02-28T10:49:02Z

#567 drops py36

.github/workflows/test.yml

ionelmc · 2023-02-28T12:24:42Z

Ruff looks nice if it can replace the all the tools with a single config. Are there any downsides with ruff or anything that would need attention?

cclauss · 2023-02-28T12:31:07Z

I have not seen downsides (except maybe it is not yet v1.0) and I have been using it broadly:
https://beta.ruff.rs/docs/#testimonials

Pierre-Sassoulas

Apart from the fact that without fix it's not equivalent to having pyupgrade LGTM.

ionelmc · 2023-03-10T11:16:04Z

I've played a bit with ruff now, its isort support is incomplete (no support for default-section or src-paths at least). The old isort hook needs to be kept.

cclauss · 2023-03-10T11:26:18Z

This cannot be achieved by using forced separate, known parties, known local folder and src?

https://beta.ruff.rs/docs/settings/#isort

If not then I can drop the I rules from this pull request and bring back isort.

Timothy Crosley, creator of isort:

Just switched my first project to Ruff. Only one downside so far: it's so fast I couldn't believe it was working till I intentionally introduced some errors.

https://beta.ruff.rs/docs/#testimonials

ionelmc · 2023-03-10T14:29:44Z

.ruff.toml

+    "dist",
+]
+line-length = 140
+select = [


Shouldn't this be extend-select instead?

If you're wondering how to configure Ruff, here are some recommended guidelines:

Prefer select and ignore over extend-select and extend-ignore, to make your rule set explicit.

https://beta.ruff.rs/docs/configuration

Well all I want is to not hardcode a ruleset (which select = [stuff] exactly is). I don't think any of those recommendations are worth considering blindly given the tool's age and popularity.

How about select = ["ALL"] and ignore whatever doesn't make sense for pytest-cov?

If you're wondering how to configure Ruff, here are some recommended guidelines:

Prefer select and ignore over extend-select and extend-ignore, to make your rule set explicit.

Use ALL with discretion. Enabling ALL will implicitly enable new rules whenever you upgrade.

Start with a small set of rules (select = ["E", "F"]) and add a category at-a-time. For example, you might consider expanding to select = ["E", "F", "B"] to enable the popular flake8-bugbear extension.

By default, Ruff's autofix is aggressive. If you find that it's too aggressive for your liking, consider turning off autofix for specific rules or categories (see FAQ).

There are way too many categories to enable manually. I'd expect that there are more good checks than broken or bad ones.

I noticed it's aggressive ... or rather destructive. That's why I think --show-fixes is a must. I think avoiding --fix actually adds more friction (too much back and forth for avoidable manual stuff).

Ok so I've played with it a bit more.... now I am not really sure what the best way... eg: these are either invalid checks or would be a pain to sort out, or not even worth fixing:

ignore = [ "D", # pydocstyle "ANN", # flake8-annotations "ARG", # flake8-unused-arguments "BLE", # flake8-blind-except "C90", # mccabe "EM", # flake8-errmsg "FBT", # flake8-boolean-trap "INP", # flake8-no-pep420 "PLR", # Pylint Refactor "PLW", # Pylint Warning "Q", # flake8-quotes "RET", # flake8-return "SIM102", # flake8-simplify collapsible-if "SIM105", # flake8-simplify use-contextlib-suppress "SLF", # flake8-self "T20", # flake8-print "S101", # flake8-bandit assert "S102", # flake8-bandit exec "S110", # flake8-bandit try-except-pass "TRY", # tryceratops ]

Now considering that rsync features are being dropped in xdist ... a lot of bulk using that in pytest-cov becomes unnecessary, if it isn't already as some people are suggesting pytest-cov is not necessary for getting xdist support...

I guess select with a few is fine for now.

So... How should we proceed? Given your explorations and your knowledge of the codebase, do you want to open a new PR that cherry-picks from this one? I have no trouble closing this with unmerged commits. Or should I press on?

I'd also recommend the C4 checks as they are popular, increase performance, and have autofixes enabled for all rules.

Is there somewhere proof that C4 mods increase performance?

.ruff.toml

cclauss · 2023-03-20T17:55:25Z

As the Ruff docs say, select=ALL is a bad idea. Closing.

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing</p> </li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…169) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…52) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…330) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…579) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.10.1 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[canonical#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[canonical#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[canonical#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[canonical#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[canonical#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[canonical#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[canonical#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[canonical#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[canonical#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[canonical#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[canonical#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[canonical#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[canonical#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing</p> </li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.10.1...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=2.10.1&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: hamistao <[email protected]>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

[//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.10.0 to 6.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.10.0...v6.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=2.10.0&new-version=6.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: i_virus <[email protected]>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 6.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=6.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ab2cd263ee46ae0777516ac681984c692feff3cf"><code>ab2cd26</code></a> Add py 3.13 to test grid and update some deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2de0c6c4bd0d4f421d2d599a60ac9826662b22f2"><code>2de0c6c</code></a> add reference to code source</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/362a35966723a7a51e1cbefb57035b10f12bc65a"><code>362a359</code></a> move section between functions</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v6.0.0...v6.1.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…#82) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ab2cd263ee46ae0777516ac681984c692feff3cf"><code>ab2cd26</code></a> Add py 3.13 to test grid and update some deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2de0c6c4bd0d4f421d2d599a60ac9826662b22f2"><code>2de0c6c</code></a> add reference to code source</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/362a35966723a7a51e1cbefb57035b10f12bc65a"><code>362a359</code></a> move section between functions</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.6.0...v6.1.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…#61) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ab2cd263ee46ae0777516ac681984c692feff3cf"><code>ab2cd26</code></a> Add py 3.13 to test grid and update some deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2de0c6c4bd0d4f421d2d599a60ac9826662b22f2"><code>2de0c6c</code></a> add reference to code source</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/362a35966723a7a51e1cbefb57035b10f12bc65a"><code>362a359</code></a> move section between functions</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.6.0...v6.1.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 6.1.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ab2cd263ee46ae0777516ac681984c692feff3cf"><code>ab2cd26</code></a> Add py 3.13 to test grid and update some deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2de0c6c4bd0d4f421d2d599a60ac9826662b22f2"><code>2de0c6c</code></a> add reference to code source</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/362a35966723a7a51e1cbefb57035b10f12bc65a"><code>362a359</code></a> move section between functions</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v6.1.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=6.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…backend (#54) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v6.0.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…#62) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.6.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…#84) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.6.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…#1673) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.6.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…637) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.1.1">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.11.1 to 6.1.1. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.11.1...v6.1.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=2.11.1&new-version=6.1.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Ilya Lavrenov <[email protected]> Co-authored-by: Alina Kladieva <[email protected]>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 6.1.1. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.1.1 (2025-04-05)</h2> <ul> <li>Fixed breakage that occurs when <code>--cov-context</code> and the <code>no_cover</code> marker are used together.</li> </ul> <h2>6.1.0 (2025-04-01)</h2> <ul> <li>Change terminal output to use full width lines for the coverage header. Contributed by Tsvika Shapira in <code>[#678](pytest-dev/pytest-cov#678) <https://github.com/pytest-dev/pytest-cov/pull/678></code>_.</li> <li>Removed unnecessary CovFailUnderWarning. Fixes <code>[#675](pytest-dev/pytest-cov#675) <https://github.com/pytest-dev/pytest-cov/issues/675></code>_.</li> <li>Fixed the term report not using the precision specified via <code>--cov-precision</code>.</li> </ul> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> <li>Dropped support for Python 3.7.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9463242e3a7bc18a56b8f18c01b4dfb50087e5ed"><code>9463242</code></a> Bump version: 6.1.0 → 6.1.1</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7f2781b47fc9bd4a8e94ff86b4f69f5959c3d907"><code>7f2781b</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a59548f3adcb757ea8afcb40d8d849af49f6e925"><code>a59548f</code></a> Allow the context plugin to check if the controller is running or not. Fixes ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10f8cde38c3b0aaf2c75d9ed62d4f333d8809d96"><code>10f8cde</code></a> Bump version: 6.0.0 → 6.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/10b14afffcd53b19967785c0b3e8b35ebac70b6f"><code>10b14af</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/aa57aed273475b4f9975cc9a8a1662b336718662"><code>aa57aed</code></a> Refactor a bit the internals to be a bit less boilerplatey and have more clar...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/e760099a7fd5f49c235dc798bf7f222c0372b7e3"><code>e760099</code></a> Make sure the CLI precision is used when creating report. Fixes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/674">#674</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/44540e1e9f02f3b69b62834636cf3057edc960d6"><code>44540e1</code></a> Remove unnecessary CovFailUnderWarning. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/675">#675</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/204af146f8f4ff03076825a693ee6aef587deb6b"><code>204af14</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/089e7bb5c16dcfdedd54f27fda094ccb3eeaae2c"><code>089e7bb</code></a> Upgrade ruff.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v6.1.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=6.1.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Pierre-Sassoulas reviewed Feb 28, 2023

View reviewed changes

.pre-commit-config.yaml Outdated Show resolved Hide resolved

Pierre-Sassoulas reviewed Feb 28, 2023

View reviewed changes

.github/workflows/test.yml Outdated Show resolved Hide resolved

Pierre-Sassoulas added the skip-changelog label Feb 28, 2023

pre-commit: Replace flake8, isort, and pyupgrade with ruff

4200898

cclauss force-pushed the ruff branch from 2836c36 to 4200898 Compare February 28, 2023 12:26

cclauss requested a review from Pierre-Sassoulas February 28, 2023 12:43

Pierre-Sassoulas approved these changes Feb 28, 2023

View reviewed changes

ionelmc reviewed Mar 10, 2023

View reviewed changes

.ruff.toml Show resolved Hide resolved

Pierre-Sassoulas mentioned this pull request Mar 10, 2023

PEP 621: Migrate settings from setup.cfg into pyproject.toml #586

Closed

cclauss requested a review from ionelmc March 20, 2023 16:40

cclauss force-pushed the ruff branch from 3fb7443 to d5a6605 Compare March 20, 2023 16:44

Make changes requested in code review

430f0c8

cclauss force-pushed the ruff branch from 7c21db2 to 430f0c8 Compare March 20, 2023 17:38

Add ruff per-file-ignores

469085c

cclauss closed this Mar 20, 2023

cclauss deleted the ruff branch March 20, 2023 17:55

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

cclauss commented Feb 28, 2023 •

edited

Loading

Pierre-Sassoulas commented Feb 28, 2023

RonnyPfannschmidt commented Feb 28, 2023

cclauss commented Feb 28, 2023

ionelmc commented Feb 28, 2023

cclauss commented Feb 28, 2023

Pierre-Sassoulas left a comment

ionelmc commented Mar 10, 2023 •

edited

Loading

cclauss commented Mar 10, 2023 •

edited

Loading

ionelmc Mar 10, 2023

cclauss Mar 10, 2023 •

edited

Loading

ionelmc Mar 10, 2023

cclauss Mar 10, 2023

ionelmc Mar 10, 2023

ionelmc Mar 10, 2023

cclauss Mar 10, 2023

Skylion007 Mar 20, 2023

cclauss Mar 20, 2023

cclauss commented Mar 20, 2023

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

Conversation

cclauss commented Feb 28, 2023 • edited Loading

Pierre-Sassoulas commented Feb 28, 2023

RonnyPfannschmidt commented Feb 28, 2023

cclauss commented Feb 28, 2023

ionelmc commented Feb 28, 2023

cclauss commented Feb 28, 2023

Pierre-Sassoulas left a comment

Choose a reason for hiding this comment

ionelmc commented Mar 10, 2023 • edited Loading

cclauss commented Mar 10, 2023 • edited Loading

Choose a reason for hiding this comment

cclauss Mar 10, 2023 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

cclauss commented Mar 20, 2023

cclauss commented Feb 28, 2023 •

edited

Loading

ionelmc commented Mar 10, 2023 •

edited

Loading

cclauss commented Mar 10, 2023 •

edited

Loading

cclauss Mar 10, 2023 •

edited

Loading