entities disappear

[OlePZ9]

After having installed the integration successfully, the integration found 509 entities, both solarchargers included. After a while (reboot?) some of the entities disappeared.

What happened here?

[sfstar]

Are there any error messages present in the logs regarding the startup of the integration?

[OlePZ9]

Since adding the integration, this all is not working anymore...

[OlePZ9]

[sfstar]

What are the errors you see when you click the logs link that you can see in your screenshot?
Are there any errors on that page that were generated by this integration?

[OlePZ9]

Honestly speaking, I have no idea what the reason is. The same setup with my manual Modbus integration in another virtual machine clone works fine

[OlePZ9]

[OlePZ9]

[OlePZ9]

[OlePZ9]

Braamvr may had explained the reason in his issue about missing data from his grid meter

[OlePZ9]

[OlePZ9]

As you can see in the second picture, the integration also uses 0, in my Modbus setup I am using 100

[OlePZ9]

https://www.victronenergy.com/live/ccgx:modbustcp_faq

[OlePZ9]

[dansonamission]

I have the same issue, each time we restart or reload HA we loose access to one of our solar charge controllers.

We have two solar charge controllers on VE.CAN. Its always the first controller we loose access to, which is shown as model 0. The other controller is shown as model 1. Both controllers are the same version, MPPT 250/85 ve.can. Cerbo gx on v2.92 and multi II on v494.

It looks like OlePZ9 is also loosing access to 0 as well.

[sfstar]

Thank you,
This information is really helpfull in understanding what is going on at your ends.
I currently do not have a ve.can devices (planned for the near future) so in order to reproduce your issues I would need to check if I can reproduce it in demo mode.
Since this has a large impact on the functioning of my system I will need some time in order to find a suitable window for down-time.