Skip to content

Commit ce4dbe0

Browse files
hasenbanckxC0000005
hasenbanck
authored and
xC0000005
committed
Add RemRam v1 board variant (stm32duino#287)
Add RemRam v1 board variant RemRam is an open-source 3D printing controller. It's source files can be found at [1]. [1] https://github.com/hasenbanck/remram Signed-off-by: Nils Hasenbanck <[email protected]>
1 parent 896d694 commit ce4dbe0

11 files changed

+2595
-0
lines changed

‎boards.txt

Lines changed: 71 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -529,6 +529,45 @@ Maple.menu.upload_method.serialMethod=Serial
529529
Maple.menu.upload_method.serialMethod.upload.protocol=maple_serial
530530
Maple.menu.upload_method.serialMethod.upload.tool=serial_upload
531531

532+
###############################
533+
# RemRam
534+
535+
RemRam.name=RemRam series
536+
537+
RemRam.build.vid=0x0483
538+
RemRam.build.pid=0x5711
539+
RemRam.vid.0=0x0483
540+
RemRam.pid.0=0x5711
541+
542+
RemRam.build.core=arduino
543+
RemRam.build.board=RemRam
544+
RemRam.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
545+
546+
# REMRAM_V1 board
547+
# Support: Serial1 (USART1 on PA10, PA9)
548+
RemRam.menu.pnum.REMRAM_V1=RemRam v1
549+
RemRam.menu.pnum.REMRAM_V1.upload.maximum_size=2097152
550+
RemRam.menu.pnum.REMRAM_V1.upload.maximum_data_size=524288
551+
RemRam.menu.pnum.REMRAM_V1.build.mcu=cortex-m7 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
552+
RemRam.menu.pnum.REMRAM_V1.build.board=REMRAM_V1
553+
RemRam.menu.pnum.REMRAM_V1.build.series=STM32F7xx
554+
RemRam.menu.pnum.REMRAM_V1.build.product_line=STM32F765xx
555+
RemRam.menu.pnum.REMRAM_V1.build.variant=REMRAM_V1
556+
RemRam.menu.pnum.REMRAM_V1.build.cmsis_lib_gcc=arm_cortexM7l_math
557+
558+
# Virtual COM port
559+
#RemRam.menu.usb.none=None
560+
#RemRam.menu.usb.CDC=CDC
561+
#RemRam.menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DUSE_USB_FS
562+
563+
# Upload menu
564+
RemRam.menu.upload_method.STLinkMethod=STLink
565+
RemRam.menu.upload_method.STLinkMethod.upload.protocol=STLink
566+
RemRam.menu.upload_method.STLinkMethod.upload.tool=stlink_upload
567+
568+
RemRam.menu.upload_method.serialMethod=Serial
569+
RemRam.menu.upload_method.serialMethod.upload.protocol=maple_serial
570+
RemRam.menu.upload_method.serialMethod.upload.tool=serial_upload
532571

533572
################################################################################
534573
# Serialx activation
@@ -568,6 +607,12 @@ Maple.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
568607
Maple.menu.xserial.disabled=Disabled (No Serial)
569608
Maple.menu.xserial.disabled.build.xSerial=
570609

610+
RemRam.menu.xserial.generic=Enabled with generic Serial
611+
RemRam.menu.xserial.none=Enabled without generic Serial
612+
RemRam.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
613+
RemRam.menu.xserial.disabled=Disabled (No Serial)
614+
RemRam.menu.xserial.disabled.build.xSerial=
615+
571616
# USB connectivity
572617
Nucleo_144.menu.usb.none=None
573618
Nucleo_144.menu.usb.HID=HID keyboard and mouse support (if available)
@@ -749,3 +794,29 @@ Maple.menu.opt.o3lto.build.flags.ldspecs=-flto
749794
Maple.menu.opt.ogstd=Debug (-g)
750795
Maple.menu.opt.ogstd.build.flags.optimize=-g -Og
751796
Maple.menu.opt.ogstd.build.flags.ldspecs=
797+
798+
RemRam.menu.opt.osstd=Smallest (-Os default)
799+
RemRam.menu.opt.oslto=Smallest (-Os) with LTO
800+
RemRam.menu.opt.oslto.build.flags.optimize=-Os -flto
801+
RemRam.menu.opt.oslto.build.flags.ldspecs=-flto
802+
RemRam.menu.opt.o1std=Fast (-O1)
803+
RemRam.menu.opt.o1std.build.flags.optimize=-O1
804+
RemRam.menu.opt.o1std.build.flags.ldspecs=
805+
RemRam.menu.opt.o1lto=Fast (-O1) with LTO
806+
RemRam.menu.opt.o1lto.build.flags.optimize=-O1 -flto
807+
RemRam.menu.opt.o1lto.build.flags.ldspecs=-flto
808+
RemRam.menu.opt.o2std=Faster (-O2)
809+
RemRam.menu.opt.o2std.build.flags.optimize=-O2
810+
RemRam.menu.opt.o2std.build.flags.ldspecs=
811+
RemRam.menu.opt.o2lto=Faster (-O2) with LTO
812+
RemRam.menu.opt.o2lto.build.flags.optimize=-O2 -flto
813+
RemRam.menu.opt.o2lto.build.flags.ldspecs=-flto
814+
RemRam.menu.opt.o3std=Fastest (-O3)
815+
RemRam.menu.opt.o3std.build.flags.optimize=-O3
816+
RemRam.menu.opt.o3std.build.flags.ldspecs=
817+
RemRam.menu.opt.o3lto=Fastest (-O3) with LTO
818+
RemRam.menu.opt.o3lto.build.flags.optimize=-O3 -flto
819+
RemRam.menu.opt.o3lto.build.flags.ldspecs=-flto
820+
RemRam.menu.opt.ogstd=Debug (-g)
821+
RemRam.menu.opt.ogstd.build.flags.optimize=-g -Og
822+
RemRam.menu.opt.ogstd.build.flags.ldspecs=

‎variants/REMRAM_V1/PeripheralPins.c

Lines changed: 424 additions & 0 deletions
Large diffs are not rendered by default.

‎variants/REMRAM_V1/PinNamesVar.h

Lines changed: 25 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,25 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = PA_2,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = PC_1,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = PC_13,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = PI_8,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = PI_11,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif

‎variants/REMRAM_V1/ldscript.ld

Lines changed: 167 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,167 @@
1+
/*
2+
*****************************************************************************
3+
**
4+
5+
** File : LinkerScript.ld
6+
**
7+
** Abstract : Linker script for STM32F765VITx Device with
8+
** 2048KByte FLASH, 512KByte RAM
9+
**
10+
** Set heap size, stack size and stack location according
11+
** to application requirements.
12+
**
13+
** Set memory bank area and size if external memory is used.
14+
**
15+
** Target : STMicroelectronics STM32
16+
**
17+
**
18+
** Distribution: The file is distributed as is, without any warranty
19+
** of any kind.
20+
**
21+
** (c)Copyright Ac6.
22+
** You may use this file as-is or modify it according to the needs of your
23+
** project. Distribution of this file (unmodified or modified) is not
24+
** permitted. Ac6 permit registered System Workbench for MCU users the
25+
** rights to distribute the assembled, compiled & linked contents of this
26+
** file as part of an application binary file, provided that it is built
27+
** using the System Workbench for MCU toolchain.
28+
**
29+
*****************************************************************************
30+
*/
31+
32+
/* Entry Point */
33+
ENTRY(Reset_Handler)
34+
35+
/* Highest address of the user mode stack */
36+
_estack = 0x20080000; /* end of RAM */
37+
/* Generate a link error if heap and stack don't fit into RAM */
38+
_Min_Heap_Size = 0x200; /* required amount of heap */
39+
_Min_Stack_Size = 0x400; /* required amount of stack */
40+
41+
/* Specify the memory areas */
42+
MEMORY
43+
{
44+
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K
45+
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K
46+
}
47+
48+
/* Define output sections */
49+
SECTIONS
50+
{
51+
/* The startup code goes first into FLASH */
52+
.isr_vector :
53+
{
54+
. = ALIGN(4);
55+
KEEP(*(.isr_vector)) /* Startup code */
56+
. = ALIGN(4);
57+
} >FLASH
58+
59+
/* The program code and other data goes into FLASH */
60+
.text :
61+
{
62+
. = ALIGN(4);
63+
*(.text) /* .text sections (code) */
64+
*(.text*) /* .text* sections (code) */
65+
*(.glue_7) /* glue arm to thumb code */
66+
*(.glue_7t) /* glue thumb to arm code */
67+
*(.eh_frame)
68+
69+
KEEP (*(.init))
70+
KEEP (*(.fini))
71+
72+
. = ALIGN(4);
73+
_etext = .; /* define a global symbols at end of code */
74+
} >FLASH
75+
76+
/* Constant data goes into FLASH */
77+
.rodata :
78+
{
79+
. = ALIGN(4);
80+
*(.rodata) /* .rodata sections (constants, strings, etc.) */
81+
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
82+
. = ALIGN(4);
83+
} >FLASH
84+
85+
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
86+
.ARM : {
87+
__exidx_start = .;
88+
*(.ARM.exidx*)
89+
__exidx_end = .;
90+
} >FLASH
91+
92+
.preinit_array :
93+
{
94+
PROVIDE_HIDDEN (__preinit_array_start = .);
95+
KEEP (*(.preinit_array*))
96+
PROVIDE_HIDDEN (__preinit_array_end = .);
97+
} >FLASH
98+
.init_array :
99+
{
100+
PROVIDE_HIDDEN (__init_array_start = .);
101+
KEEP (*(SORT(.init_array.*)))
102+
KEEP (*(.init_array*))
103+
PROVIDE_HIDDEN (__init_array_end = .);
104+
} >FLASH
105+
.fini_array :
106+
{
107+
PROVIDE_HIDDEN (__fini_array_start = .);
108+
KEEP (*(SORT(.fini_array.*)))
109+
KEEP (*(.fini_array*))
110+
PROVIDE_HIDDEN (__fini_array_end = .);
111+
} >FLASH
112+
113+
/* used by the startup to initialize data */
114+
_sidata = LOADADDR(.data);
115+
116+
/* Initialized data sections goes into RAM, load LMA copy after code */
117+
.data :
118+
{
119+
. = ALIGN(4);
120+
_sdata = .; /* create a global symbol at data start */
121+
*(.data) /* .data sections */
122+
*(.data*) /* .data* sections */
123+
124+
. = ALIGN(4);
125+
_edata = .; /* define a global symbol at data end */
126+
} >RAM AT> FLASH
127+
128+
129+
/* Uninitialized data section */
130+
. = ALIGN(4);
131+
.bss :
132+
{
133+
/* This is used by the startup in order to initialize the .bss secion */
134+
_sbss = .; /* define a global symbol at bss start */
135+
__bss_start__ = _sbss;
136+
*(.bss)
137+
*(.bss*)
138+
*(COMMON)
139+
140+
. = ALIGN(4);
141+
_ebss = .; /* define a global symbol at bss end */
142+
__bss_end__ = _ebss;
143+
} >RAM
144+
145+
/* User_heap_stack section, used to check that there is enough RAM left */
146+
._user_heap_stack :
147+
{
148+
. = ALIGN(8);
149+
PROVIDE ( end = . );
150+
PROVIDE ( _end = . );
151+
. = . + _Min_Heap_Size;
152+
. = . + _Min_Stack_Size;
153+
. = ALIGN(8);
154+
} >RAM
155+
156+
157+
158+
/* Remove information from the standard libraries */
159+
/DISCARD/ :
160+
{
161+
libc.a ( * )
162+
libm.a ( * )
163+
libgcc.a ( * )
164+
}
165+
166+
.ARM.attributes 0 : { *(.ARM.attributes) }
167+
}

0 commit comments

Comments
 (0)